⚡ Black Friday has started : 1.000+ amazing deals & free shipping on orders of €75 or more! Check out the sale.
skf_kmt11
skf_kmt11_2
skf_kmt11
skf_kmt11_2

SKF KMT 11 locknut 55 x 85 x 25 mm M55x2

Supplier number: SKF KMT 11 | EAN 7316577655028
Recommended Retail Price €260.97
128.95 tax incl.
€106.57 excl. VAT (incl. all environmental contributions)
On stock - immediately available | we have 1 products in stock.

  • Delivery by DHL

High-precision locking with Skf kmt 11

Practical benefits
  • Accurate perpendicular shaft alignment: Three equally spaced locking pins align the nut accurately at right angles to the shaft while adjusting for slight angular misalignments.
  • High axial load support: The M55X2 thread design withstands heavy axial loads securely without requiring a keyway cut into your shaft.
  • Simple repeated installation: You can install and remove the lock nut quickly using a standard hook spanner, simplifying routine maintenance and bearing adjustments.

In a nutshell

The right choise for

Secure machine tool spindle bearings with the Skf kmt 11 precision lock nut. Featuring an M55X2 thread, an 85 mm outer diameter, and a 25 mm width, this nut is engineered for demanding mechanical engineering tasks. It withstands heavy alternating axial loads and prevents assemblies from loosening under severe vibration.

No shaft keyway is required. Three equally spaced locking pins align the nut perpendicular to the shaft axis and compensate for slight angular misalignments. Because the brass pins match the thread flank angle, you achieve precise preloading without damaging shaft threads. Position the nut using a hook spanner such as the hn 12-13, then torque the three M8 set screws to 18 Nm for a fully reusable lock.



€128.95
In stock - tax incl.

Product information

Key features according to our expert

  • Outer diameter: 85 mm
  • Width: 25 mm
  • Thread designation: M55 x 2

Product description

KMT precision lock nuts are intended for applications where high precision, simple assembly and reliable locking are required. The three equally-spaced locking pins enable these lock nuts to be accurately positioned at right angles to the shaft. However, they can also be adjusted to compensate for slight angular deviations of adjacent components. Maximum axial run-out between the locating face and thread (up to size 40): 0.005 mm

  • No keyway required
  • Withstands high axial loads
  • Reliable, effective locking mechanism
  • Designed for frequent and simple installation and removal
  • Available for thread M 10x0.75 to M 200x3 (sizes 0 to 40) and Tr 220x4 to Tr 420x5 (sizes 44 to 84)

Documents

All Features

Outer diameter
85 mm
Width
25 mm
Thread designation
M55 x 2
Outside diameter
85
Bore diameter
55
Associated mounting tool
HN 12-13
Nut for hydraulic mounting
No
Locking device
Incorporated in the lock nut
  • Brand SKF
  • EAN 7316577655028
  • Supplier number SKF KMT 11

Frequently asked questions about this product

Answered by specialists
What are the thread size and dimensions of this lock nut?
The Skf kmt 11 features an M55X2 thread, an outside diameter of 85 mm, and a width of 25 mm.
Does the shaft require a keyway for installation?
No, a keyway is not required. Three integrated locking pins clamp the nut securely onto the shaft thread.
Which tool is required to tighten this lock nut?
You can tighten this nut using a suitable hook spanner, such as the Skf hn 12-13.
How do you lock the Skf kmt 11 in place?
Tighten the three integrated M8 grub screws evenly with a hex key to the recommended torque of 18 Nm.
Can this precision lock nut be reused after removal?
Yes, the pin locking mechanism prevents damage to the shaft threads, making the nut fully reusable.
Questions about this product?

Our product specialists are happy to help with any questions about this range. Call, email or chat with us!

Chat with us

Viewed products

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.