SKF KM 10 locknut 50 x 70 x 11 mm M50x1.5

Supplier number: SKF KM 10 | EAN 7316571353463

16.20 tax incl.

€13.39 excl. VAT (incl. all environmental contributions)

On stock - immediately available

Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

Reliable shaft locking with Skf KM 10

Practical benefits

Precise bearing shaft location: With the M50X1.5 metric thread, you accurately locate and secure bearings onto the shaft.
Quick hook spanner mounting: Four peripheral slots give you positive grip when tightening or loosening with a spanner.
Durable and reusable design: You can reuse this heavy-duty lock nut reliably whenever you fit a new lock washer.

In a nutshell

The right choise for

With the Skf km 10 lock nut, you locate and secure bearings and transmission components accurately and vibration-free on the shaft. The M50X1.5 thread allows you to set the axial position, bearing clearance, or preload with precision. Four equally spaced peripheral slots provide a positive grip for a suitable hook spanner, making installation and removal straightforward. Featuring an outer diameter of 70 mm and a width of 11 mm, this steel lock nut pairs with an mb 10 lock washer to deliver a dependable, reusable mechanical shaft locking solution for maintenance and assembly work.

Product information FAQ

€16.20

In stock - tax incl.

Key features according to our expert

Outer diameter: 70 mm
Width: 11 mm
Thread designation: M50 x 1,5

Product description

KM and KML lock nuts are used to locate bearings onto a shaft. They have metric threads and four equally spaced slots located around their circumference to accommodate a spanner. They should be locked by a lock washer to prevent unintentional loosening. KM and KML lock nuts can be reused, provided they are not damaged.

Simple, stable and reliable fastening element
Easy to install and remove
Reusable with a new lock washer
Available for thread M 10x0.75 to M 200x3 (sizes 0 to 40)

Documents

⤓ Technical data sheet PDF

All Features

Outer diameter: 70 mm
Width: 11 mm
Thread designation: M50 x 1,5
Outside diameter: 70
Bore diameter: 50
Associated mounting tool: HN 10-11
Nut for hydraulic mounting: No
Locking device: Lock washer

Brand SKF
01230597
EAN 7316571353463
Supplier number SKF KM 10

Frequently asked questions about this product

Answered by specialists

What is the SKF KM 10 lock nut used for?: It is used to locate and secure bearings and other power transmission components firmly onto a shaft.
What are the thread size and dimensions of this nut?: It features an M50 x 1.5 thread, an outer diameter of 70 mm, and a width of 11 mm.
Which locking device is required?: The nut is secured on the shaft using a matching MB 10 lock washer to prevent unintentional loosening.
Can the SKF KM 10 lock nut be reused?: Yes, provided it is undamaged. Always fit a new lock washer when reinstalling.
What tool is needed to tighten or remove the nut?: You install and remove it using a suitable hook spanner engaging with the four slots around its outer circumference.