⚡ Black Friday has started : 1.000+ amazing deals & free shipping on orders of €75 or more! Check out the sale.
skf_frb8572
skf_frb8572_2
skf_frb8572
skf_frb8572_2

SKF FRB 8.5/72 circlip 64 x 72 x 8.5 mm

Supplier number: SKF FRB 8.5/72 | EAN 7316577752758
Recommended Retail Price €16.59
8.20 tax incl.
€6.78 excl. VAT (incl. all environmental contributions)
On stock - immediately available

  • Delivery by DHL

Precise bearing retention with Skf rings

Practical benefits
  • Secure axial bearing location: This ring firmly locks the bearing inside split housings when the seat width exceeds the bearing width.
  • Exact engineered dimensions: The 72 mm outer diameter and 8.5 mm width align accurately within compatible standard industrial housings.
  • Reduced shaft drift: You eliminate unwanted lateral play to maintain smooth power transmission under demanding mechanical loads.

In a nutshell

The right choise for

Secure bearings firmly inside split plummer block housings using the Skf frb 8.5/72 locating ring. This stabilizing ring bridges the gap whenever the housing seat is wider than the bearing itself. It eliminates lateral play and keeps rotating shafts accurately aligned under demanding industrial operating conditions.

Engineered with an outside diameter of 72 mm, an inside diameter of 64 mm, and a width of 8.5 mm, this ring seats accurately in Skf housings with a 72 mm bore, including snl, sn, and se series housings. Installation typically requires two rings placed on either side of the bearing, or a single ring mounted on the lock nut side.



€8.20
In stock - tax incl.

Product information

Key features according to our expert

  • Inner diameter: 64 mm
  • Outer diameter: 72 mm
  • Width: 8,5 mm

Product description

A bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating ring is required, it should be installed on the same side as the lock nut.

Documents

All Features

Inner diameter
64 mm
Outer diameter
72 mm
Width
8,5 mm
Outside diameter
72
Inside diameter
64
Accessory type
Locating ring
  • Brand SKF
  • EAN 7316577752758
  • Supplier number SKF FRB 8.5/72

Frequently asked questions about this product

Answered by specialists
What is the purpose of this locating ring?
It secures a bearing axially in its housing when the housing seat is wider than the bearing.
What are the exact dimensions of the Skf frb 8.5/72?
It has an outer diameter of 72 mm, an inner diameter of 64 mm, and a width of 8.5 mm.
How many locating rings are needed per housing?
Typically, two rings are required per bearing housing, with one placed on each side of the bearing.
Which bearing housings does this ring fit?
This locating ring fits Skf bearing housings engineered with a 72 mm seat diameter.
Questions about this product?

Our product specialists are happy to help with any questions about this range. Call, email or chat with us!

Chat with us

Viewed products

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.