SKF FRB 5/52 circlip 47 x 52 x 5 mm

Supplier number: SKF FRB 5/52 | EAN 7316577313997

11.77 tax incl.

€9.73 excl. VAT (incl. all environmental contributions)

On stock - immediately available | we have 3 products in stock.

Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

Reliable axial locating with FRB 5/52

Practical benefits

Precise axial positioning: You secure bearings firmly inside the housing when the housing seat is wider than the bearing.
Exact engineered dimensions: With a 47 mm bore, 52 mm outer diameter, and 5 mm width, you achieve a seamless fit.
Stable bearing operation: You eliminate unwanted axial movement, protecting your machinery and extending bearing service life.

In a nutshell

The right choise for

With the Skf frb 5/52 locating ring, you secure bearings firmly and eliminate axial play inside the housing. When the housing seat is wider than the bearing itself, this ring bridges the gap to prevent unwanted lateral movement and stabilise shaft alignment. Precision-engineered with a 47 mm inner diameter, 52 mm outer diameter, and 5 mm width, it delivers an exact fit. This allows you to easily convert a non-locating arrangement into a stable locating bearing setup for smooth and dependable machinery operation.

Product information FAQ

€11.77

In stock - tax incl.

Key features according to our expert

Inner diameter: 47 mm
Outer diameter: 52 mm
Width: 5 mm

Product description

A bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating ring is required, it should be installed on the same side as the lock nut.

Documents

⤓ Technical data sheet PDF

All Features

Inner diameter: 47 mm
Outer diameter: 52 mm
Width: 5 mm
Outside diameter: 52
Inside diameter: 47
Accessory type: Locating ring

Brand SKF
01230022
EAN 7316577313997
Supplier number SKF FRB 5/52

Frequently asked questions about this product

Answered by specialists

What are the dimensions of this locating ring?: The ring has an outer diameter of 52 mm, an inner diameter of 47 mm, and a width of 5 mm.
What is the SKF FRB 5/52 locating ring used for?: It is used to axially secure a bearing in the housing when the housing seat is wider than the bearing.
How many locating rings are needed per bearing housing?: It depends on the setup; typically, two rings are used (one on each side of the bearing).
Where do you install the ring if only one is required?: If only one locating ring is required, install it on the same side as the lock nut.