⚡ Black Friday has started : 1.000+ amazing deals & free shipping on orders of €75 or more! Check out the sale.
skf_frb3552
skf_frb3552_2
skf_frb3552
skf_frb3552_2

SKF FRB 3.5/52 circlip 47 x 52 x 3.5 mm

Supplier number: SKF FRB 3.5/52 | EAN 7316570266825
10.41 tax incl.
€8.60 excl. VAT (incl. all environmental contributions)
On stock - immediately available

  • Delivery by DHL

Precise axial bearing location

Practical benefits
  • Accurate housing fitment: With a 52 mm outer diameter and 47 mm bore, this locating ring seats cleanly inside industrial bearing housings.
  • Secure axial retention: A 3.5 mm width fills excess housing clearance to prevent axial drift of the held bearing during operation.
  • Rigid structural stability: The solid profile maintains uniform support against lateral forces, ensuring dependable alignment under continuous mechanical loads.

In a nutshell

The right choise for

The Skf frb 3.5/52 locating ring provides dependable axial retention for bearings in plummer block and split bearing housings, such as Skf snl units. Whenever the housing seat is wider than the bearing, this ring fills the excess clearance. Unconstrained shaft float is eliminated, preventing bearing misalignment and premature mechanical damage.

Featuring an outer diameter of 52 mm, an inner diameter of 47 mm, and a width of 3.5 mm, the ring seats firmly in position. Its rigid structural profile maintains uniform support against lateral forces, keeping your fixed bearing arrangement solid under continuous operational loads.



€10.41
In stock - tax incl.

Product information

Key features according to our expert

  • Inner diameter: 47 mm
  • Outer diameter: 52 mm
  • Width: 3,5 mm

Product description

A bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating ring is required, it should be installed on the same side as the lock nut.

Documents

All Features

Inner diameter
47 mm
Outer diameter
52 mm
Width
3,5 mm
Outside diameter
52
Inside diameter
47
Accessory type
Locating ring
  • Brand SKF
  • EAN 7316570266825
  • Supplier number SKF FRB 3.5/52

Frequently asked questions about this product

Answered by specialists
What is the purpose of this Skf frb 3.5/52 locating ring?
It fixes a locating bearing axially in its housing when the housing seat is wider than the bearing.
What are the exact dimensions of this ring?
The outer diameter is 52 mm, the inner diameter is 47 mm, and the width is 3.5 mm.
How many locating rings are needed per housing?
Most applications require two rings per housing, placing one on each side of the bearing.
Which side do you install the ring on if only one is required?
Place the ring on the same side as the bearing lock nut.
Questions about this product?

Our product specialists are happy to help with any questions about this range. Call, email or chat with us!

Chat with us

Viewed products

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.