SKF FRB 18/180 circlip 167 x 180 x 18 mm

Supplier number: SKF FRB 18/180 | EAN 7316577017383

Recommended Retail Price €63.68

31.40 tax incl.

€25.95 excl. VAT (incl. all environmental contributions)

On stock - immediately available | we have 1 products in stock.

Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

Secure bearing positioning with FRB 18/180

Practical benefits

Precise axial bearing retention: You securely lock the bearing inside the housing to prevent unwanted axial movement during intensive operations.
Accurate housing fitment: Featuring an outside diameter of 180 mm and 18 mm width, this ring seats cleanly inside your housing.
Heavy-duty mechanical strength: The durable build ensures you maintain steady alignment and continuous reliability under demanding industrial conditions.

In a nutshell

The right choise for

With the Skf frb 18/180 locating ring, you achieve secure and precise axial retention of the bearing inside its housing. When the bearing width is narrower than the housing seat, this durable steel ring bridges the dimensional gap cleanly. Featuring an outside diameter of 180 mm, an inside diameter of 167 mm, and a width of 18 mm, it fits accurately to eliminate unwanted axial float and movement during heavy-duty operation. This ensures reliable mechanical alignment and dependable performance across your industrial rotating equipment and drive assemblies.

Product information FAQ

€31.40

In stock - tax incl.

Key features according to our expert

Inner diameter: 167 mm
Outer diameter: 180 mm
Width: 18 mm

Product description

A bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating ring is required, it should be installed on the same side as the lock nut.

Documents

⤓ Technical data sheet PDF

All Features

Inner diameter: 167 mm
Outer diameter: 180 mm
Width: 18 mm
Outside diameter: 180
Inside diameter: 167
Accessory type: Locating ring

Brand SKF
01230097
EAN 7316577017383
Supplier number SKF FRB 18/180

Frequently asked questions about this product

Answered by specialists

What are the dimensions of the SKF FRB 18/180 locating ring?: This locating ring has an outside diameter of 180 mm, an inside diameter of 167 mm, and a width of 18 mm.
What is the purpose of an SKF FRB locating ring?: It axially fixes a bearing inside a housing when the bearing width is narrower than the housing seat.
How many locating rings are typically needed per housing?: Typically, two rings are required per housing, placed on each side of the bearing. If only one is needed, install it on the lock nut side.
What material is this locating ring made of?: The SKF FRB 18/180 locating ring is made of steel.
How do you verify if the SKF FRB 18/180 fits your setup?: Check the specifications of your SKF bearing housing and bearing to confirm that an 18 mm wide ring with an 180 mm outer diameter is specified.