What are the exact dimensions of this bearing?

This bearing has a bore diameter of 65 mm, an outside diameter of 140 mm, and a width of 33 mm.

What loads can the 7313 BECBJ support?

This single row angular contact ball bearing with a 40° contact angle accommodates radial loads and heavy axial loads acting in one direction.

What does the BECBJ designation mean?

BE indicates an optimized internal design with a 40° contact angle, CB indicates universal matching with normal axial clearance, and J denotes a pressed steel cage.

Is this Skf bearing sealed or pre-lubricated?

No, this is an open bearing without seals. You must lubricate the bearing with the appropriate lubricant before commissioning.

Can this bearing be mounted in pairs?

Yes, the CB universal matching design allows direct mounting in back-to-back (O), face-to-face (X), or tandem arrangements without shims.

SKF 7313 BECBJ single-row angular contact ball bearing 65 x 140 x 33 mm with contact angle 40°

Supplier number: SKF 7313 BECBJ | EAN 7316570405538

Recommended Retail Price €699.53

346.20 tax incl.

€286.12 excl. VAT (incl. all environmental contributions)

On stock - immediately available | we have 2 products in stock.

Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

High load capacity by Skf

Practical benefits

High combined load support: With a 40° contact angle, you reliably support heavy radial forces and large unilateral axial loads simultaneously.
Durable pressed steel cage: The sturdy sheet steel cage ensures precise ball guidance, giving you smooth and consistent rotational performance.
Built for high speeds: The optimized internal geometry allows you to maintain dependable operation and reduced friction under demanding rotational speeds.

In a nutshell

The right choise for

With the Skf 7313 BECBJ, you gain dependable performance under heavy combined loads. Thanks to its 40° contact angle, this single row angular contact ball bearing effortlessly supports heavy radial forces and large unidirectional axial thrust simultaneously. The durable pressed steel cage ensures precise ball guidance, delivering smooth and consistent rotational operation. Featuring dimensions of 65 x 140 x 33 mm and an optimized internal geometry, this open bearing minimizes friction at high rotational speeds in pumps, compressors, and gearboxes. Furthermore, its universal matching design allows straightforward mounting in matched sets.

Product information FAQ

€346.20

In stock - tax incl.

Key features according to our expert

Inner diameter: 65 mm
Width: 33 mm
Number of rows: 1
Axial clearance: Not applicable
Sealing (bearing): Without seals
Material (bearing seal): Not applicable
Material (cage): Sheet steel
Outer diameter: 140 mm

Product description

These single row angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They can operate at high speeds and, depending on the variant, even very high speeds. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.

High-speed capability
Accommodate relatively high radial loads and large unilateral axial loads

Documents

⤓ Technical data sheet PDF

All Features

Inner diameter: 65 mm
Width: 33 mm
Number of rows: 1
Axial clearance: Not applicable
Sealing (bearing): Without seals
Material (bearing seal): Not applicable
Material (cage): Sheet steel
Outer diameter: 140 mm
Matched arrangement: No
Ring type: One-piece inner and outer rings
Tolerance class: Class P6 (P6)
Contact type: Normal contact (two-point contact)
Basic static load rating: 86.5
Lubricant: None
Relubrication feature: Without
Reference speed: 6000
Skf performance class: SKF Explorer
Sealing: Without
Cage: Steel sheet metal
Material, bearing: Bearing steel
Locating feature, bearing outer ring: None
Bore diameter: 65
Axial internal clearance: Not applicable
Contact angle: 40
Limiting speed: 6300
Matched condition (axial clearance/ preload): Axial clearance CB
Basic dynamic load rating: 116
Coating: Without
Outer diameter: 140
Universal matching bearing: Yes

Brand SKF
01050839
EAN 7316570405538
Supplier number SKF 7313 BECBJ

Frequently asked questions about this product

Answered by specialists

What are the exact dimensions of this bearing?: This bearing has a bore diameter of 65 mm, an outside diameter of 140 mm, and a width of 33 mm.
What loads can the 7313 BECBJ support?: This single row angular contact ball bearing with a 40° contact angle accommodates radial loads and heavy axial loads acting in one direction.
What does the BECBJ designation mean?: BE indicates an optimized internal design with a 40° contact angle, CB indicates universal matching with normal axial clearance, and J denotes a pressed steel cage.
Is this Skf bearing sealed or pre-lubricated?: No, this is an open bearing without seals. You must lubricate the bearing with the appropriate lubricant before commissioning.
Can this bearing be mounted in pairs?: Yes, the CB universal matching design allows direct mounting in back-to-back (O), face-to-face (X), or tandem arrangements without shims.