r: 02951104 p: 450.641 pid: 71283 b: FLUKE q: 7 st: 1 lt: 1 ean: 0095969659215 sr: FLUKE 4296034 sr_no_br: 4296034 sr_no_br_cl: 4296034 sr_cl: FLUKE4296034 sr_dash: sold: 95085.251 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 117/323 multimeter combination set for electricians - 4296034 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description Fluke 117/323 multimeter combination kit for electricians This combination kit combines the Fluke 117 DMM and the Fluke 323 current clamp into a single total solution for productive and effective troubleshooting. The kit comes complete with the new durable C115 carrying case to protect the meter and allow easy transportation Key features 117 digital multimeter Voltalert technology for non-contact voltage detection. AutoVolt: automatic selection of AC/DC voltage. Low input impedance: helps prevent erroneous readings due to phantom voltage. Large display with white LED backlight for use in dimly lit environments. True-RMS for accurate measurements at non-linear loads. Measures 10 A (20 A overload for 30 seconds). Resistance, continuity, frequency and capacitance. Min/max/average recording of signal fluctuations. Compact ergonomic design for one-handed operation. Safety specification CAT III 600 V. Key features 323 True-RMS current clamp 400 A AC current measurement. 600 V AC and DC voltage measurement. True-RMS AC voltage and current measurement for accurate measurements on non-linear signals. Resistance measurement up to 40 kOhm with call-through test. Slim, ergonomic design. Safety specification CAT IV 300 V/CAT III 600 V. ds: dsc: Scope of delivery 117 digital multimeter 323 True-RMS current clamp TPak ToolPak magnetic meter suspension loop Measurement cable set C115 carrying case kts: multimeter combination set for electricians kpn: 117/323 kpn_dash: kpn_clear: 117323 bkpn: FLUKE 117/323 bkpn_clear: FLUKE 117323 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4296034 sr_ns: FLUKE4296034
r: 02951124 p: 507.128 pid: 73251 b: FLUKE q: 0 st: lt: 12 ean: 0095969659208 sr: FLUKE 4296029 sr_no_br: 4296029 sr_no_br_cl: 4296029 sr_cl: FLUKE4296029 sr_dash: sold: 24342.144 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 116/323 KIT HVAC combination set, including multimeter and current clamp - 4296029 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description: This set is a direct replacement for the outdated combination set 116/322 HVAC. With the extra complete HVAC combination set with multimeter and current clamp, HVAC problems can be detected and remedied more efficiently. The compact carrying case contains all the accessories needed by the HVAC specialist. Key features Fluke 116 digital multimeter Fluke 116 HVAC multimeter with temperature and microampere measurement. TL175 hardpoint measuring lead set. TPak ToolPak magnetic meter suspension loop. Flexible sleeve pipe clamp with thermocouple. 80BK integrated temperature measurement probe. 80AK-A thermocouple adapter. C115 deluxe soft carrying case with shoulder strap. Key features Fluke 323 True-RMS current clamp 400 A AC current measurement. 600 V AC and DC voltage measurement. True-RMS AC voltage and current measurement for accurate measurements on non-linear signals. Resistance measurement up to 40 k? with call-through test. Slim, ergonomic design. Safety specification CAT IV 300 V/CAT III 600 V. ds: dsc: Scope of delivery Fluke 116 HVAC multimeter with temperature and microampere measurement Fluke 323 True-RMS current clamp TL175 hard-point measuring lead set. TPak ToolPak magnetic meter suspension loop. Flexible sleeve pipe clamp with thermocouple. 80BK integrated temperature measurement probe. 80AK-A thermocouple adapter. C115 deluxe soft carry case with shoulder strap. kts: HVAC combination set, including multimeter and current clamp kpn: 116/323 KIT kpn_dash: kpn_clear: 116323KIT bkpn: FLUKE 116/323 KIT bkpn_clear: FLUKE 116323KIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4296029 sr_ns: FLUKE4296029
r: 02953707 p: 285.464 pid: 71272 b: FLUKE q: 2 st: 1 lt: 1 ean: 0095969242660 sr: FLUKE 2098657 sr_no_br: 2098657 sr_no_br_cl: 2098657 sr_cl: FLUKE2098657 sr_dash: sold: 22551.656 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE T5-H5-1AC KIT/EUR kit with T5-1000/H5 electrical tester and 1AC II voltage detector - 2098657 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description: Voltage, continuity and current tester kit with holster. Key features T5-1000 electrical tester automatically measures direct and alternating current with accurate digital resolution Includes simple and accurate OpenJaw current measurement Displays resistance up to 1000 ? Includes a continuity beeper for quick go/no-go testing. All inputs are protected according to EN61010-1 CAT III 1000 V CAT IV 600 V. UL, CSA 1AC II offers Voltbeat technology and continuous self-test so you always know it is working. When voltage is detected, the VoltAlert tip glows and a beep sounds. CAT IV 1000 V for extra protection ds: dsc: Scope of delivery Fluke T5-1000 Fluke 1AC II H5 kts: kit with T5-1000/H5 electrical tester and 1AC II voltage detector kpn: T5-H5-1AC KIT/EUR kpn_dash: T5 kpn_clear: T5H51ACKITEUR bkpn: FLUKE T5-H5-1AC KIT/EUR bkpn_clear: FLUKE T5H51ACKITEUR c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 2098657 sr_ns: FLUKE2098657
r: 02957876 p: 1573.246 pid: 71579 b: FLUKE q: 0 st: lt: 10 ean: 0095969797283 sr: FLUKE 4692716 sr_no_br: 4692716 sr_no_br_cl: 4692716 sr_cl: FLUKE4692716 sr_dash: sold: 9439.476 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1587/MDT FC digital insulation multimeter + 9040 rotary field meter + i400 AC current clamp - 4692716 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description: advanced troubleshooting kit for electric motors and drives The Fluke 1587 FC insulation multimeter with four powerful new diagnostic features via the Fluke Connect Measurements app: Timed PI/DAR ratio tests with TrendIt graphs identify moisture and contaminated insulation problems faster Memory storage via Fluke Connect, eliminating the need to write down results, reducing errors and saving data for later tracking over time Temperature compensation via the app for establishing accurate baselines and relevant historical comparisons Historical tracking of equipment and recording of trends reveals equipment deterioration over time and enables real-time on-site decisions with Fluke Connect Assets The Fluke i400 AC current clamp is a high-security current clamp for digital multimeters. The current clamp provides accurate current measurements without interrupting the electrical circuit, allowing you to measure safely according to industry safety standards. 9040 phase rotation indicator is suitable for measuring phase rotation anywhere three-phase power supplies are used to supply motors, drives and electrical systems. The phase sequence can be quickly determined and the instrument is ideal for commercial and industrial applications. Key features: Includes a Fluke 1587 FC 2-in-1 isolation DMM, Fluke i400 current clamp and a Fluke 9040 phase rotation indicator With the Fluke 1587 FC, perform insulation tests with confidence and ease plus a wide range of DMM tasks Use the Fluke i400 together with your Fluke 1587 FC to accurately measure AC current without interrupting the power circuit Check phase rotation of three-phase motors easily and safely with the Fluke 9040 The Fluke 1587 FC 2-in-1 isolation DMM PI/DAR measurements with TrendIt graphs Memory storage via the Fluke Connect Measurements app Temperature compensation via the Fluke Connect Measurements app Low-pass filter for frequency-controlled drives, for accurate measurements on motor drives Insulation test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V Insulation test voltages: 500 V and 1000 V Insulation test: 0.01 M? to 2.0 G? Insulation test: 0.1 M? to 600 M? Automatic discharge of capacitive voltages Smoothed reading of insulation test values Frequency/capacitance/diode test/temperature Min/max / AC/DC voltage / DC in millivolts / AC/DC in milliamps Resistance (0.1 ? to 50 M?) / continuity / automatic switch-off 3-year warranty/external probe, test leads, alligator clips, type K thermocouple, carrying case Fluke i400 AC current clamp Use your Fluke 1587 FC to measure 1 A AC to 400 A AC 1 mA/Amp output for easy reading Overvoltage standard CAT III 1000 V / CAT IV 600 V for added user protection Specially designed for maximum functionality in a compact form Maximum conductor Ø: 32 mm 1 year warranty Fluke 9040 phase rotation indicator Large display to easily determine field rotation and phase sequence Indication for all three phases Overvoltage standard CAT III 600 V 2-year warranty ds: dsc: Scope of delivery Fluke 1587 FC 2-in-1 insulation DMM Fluke i400 current clamp Fluke 9040 phase rotation indicator External probe Test leads Alligator clips Thermocouple type K Carrying case User documentation kts: digital insulation multimeter + 9040 rotary field meter + i400 AC current clamp kpn: 1587/MDT FC kpn_dash: kpn_clear: 1587MDTFC bkpn: FLUKE 1587/MDT FC bkpn_clear: FLUKE 1587MDTFC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4692716 sr_ns: FLUKE4692716
r: 02951106 p: 459.785 pid: 73247 b: FLUKE q: 0 st: lt: 5 ean: 0095969659192 sr: FLUKE 4296018 sr_no_br: 4296018 sr_no_br_cl: 4296018 sr_cl: FLUKE4296018 sr_dash: sold: 6436.99 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 116/62 MAX+ combination set for technicians - 4296018 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description: combination set for technicians The extra complete HVAC combination set for technicians provides the complete solution that allows more efficient detection and correction of problems with HVAC systems. The compact carrying case contains all the accessories needed by the HVAC specialist. Key features Fluke 116 digital multimeter. Designed by electricians.Manufactured by Fluke Fluke 116 HVAC multimeter with temperature and microampere measurement. TL175 hardpoint measuring lead set. TPak ToolPak magnetic meter suspension loop. Flexible sleeve pipe clamp with thermocouple. 80BK integrated temperature measurement probe. 80AK-A thermocouple adapter. C115 deluxe soft carrying case with shoulder strap. Key features Fluke 62 MAX+. Small in size.Big in ruggedness Dust and water resistant: meets IP54. Rugged: tested to withstand a 3-metre drop. Ergonomically designed: completely redesigned for even greater comfort in the hand. Distance to measurement point: 12:1. Dual laser: identifies the area to be measured. Large backlit display: makes data easier to read, even in dark environments. ds: dsc: Scope of delivery Fluke 116 HVAC multimeter with temperature and microampere measurement Fluke 62 MAX+ infrared thermometer kts: combination set for technicians kpn: 116/62 MAX+ kpn_dash: kpn_clear: 11662MAX bkpn: FLUKE 116/62 MAX+ bkpn_clear: FLUKE 11662MAX c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4296018 sr_ns: FLUKE4296018
r: 02056901 p: 3440.452 pid: 154145 b: MITUTOYO q: 0 st: lt: 8 ean: 4946368562896 sr: MITUTOYO 468-974 sr_no_br: 468-974 sr_no_br_cl: 468974 sr_cl: MITUTOYO468974 sr_dash: MITUTOYO 468 sold: 3440.452 p_range: none type: standard act: 1 avo: 1 av: Type of micrometer set Indoor micrometer set Min. measuring range 50 mm Max. measuring range 100 mm Readout 0,001 mm Quantity per set 4 n: MITUTOYO 468-974 Digimatic 3-point internal screwdriver set with interchangeable head 50-100mm cn: MICROMETER SET cn2: MICROMETER SET cn_clear: MICROMETERSET d: Product description: These are three-point inside micrometers that offer you the following advantages: Interchangeable measuring head set. Titanium-coated measuring surfaces give excellent durability and shock resistance. They also have excellent resistance to water and dust (IP65 protection class), enabling you to use them in machine conditions with splashing coolant. Large LCD display with character height of 7.5 mm for easy-to-read measurements. With setting rings and extensions. ds: dsc: kts: Digimatic 3-point internal screwdriver set with interchangeable head 50-100mm kpn: 468-974 kpn_dash: 468 kpn_clear: 468974 bkpn: MITUTOYO 468-974 bkpn_clear: MITUTOYO 468974 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Micrometer set | Home / Our brands / Mitutoyo / Mitutoyo tools / Mitutoyo measuring and inspection technique / Mitutoyo digital measuring and inspection instruments / Mitutoyo sets / Mitutoyo micrometer set sr_no_br_cl_ns: 468974 sr_ns: MITUTOYO468-974
r: 02958382 p: 647.89 pid: 72926 b: FLUKE q: 0 st: lt: 10 ean: 0095969724203 sr: FLUKE 4465618 sr_no_br: 4465618 sr_no_br_cl: 4465618 sr_cl: FLUKE4465618 sr_dash: sold: 2591.56 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE A3000 FC KIT wireless AC current clamp module kit - 4465618 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description: Features 3000 FC digital multimeter Fluke's 3000 FC series wireless multimeter with the Fluke Connect app has all the necessary functions and features for easy troubleshooting when testing and measuring: AC and DC voltage measurements up to 1000 V AC and DC current measurements with 0.01 mA resolution Continuity test, resistance measurement, diode test, capacitance and frequency measurements MIN/MAX recording CAT III 1000 V, Cat IV 600 V; IP54 Features a3000 FC The Fluke a3000 FC wireless AC current clamp module is a fully functional True-RMS current clamp that wirelessly transmits readings to other Fluke Connect-enabled master units, as shown below: Fluke 3000 FC DMM Fluke Ti200/300/400 infrared camera PC via optional pc3000 FC adapter Fluke Connect Mobile App The Fluke a3000 FC wireless AC current clamp module has all the necessary functions and features for easy troubleshooting when testing and measuring: True-RMS AC current clamp Measurement of up to 400 A AC Use as a stand-alone meter or as part of the system Log function for recording and storing up to 65,000 measured values Inrush current function ds: dsc: Scope of delivery Carrying case 3000 FC wireless digital multimeter a3000 FC current clamp module TL175 test leads AC175 alligator clips kts: wireless AC current clamp module kit kpn: A3000 FC KIT kpn_dash: kpn_clear: A3000FCKIT bkpn: FLUKE A3000 FC KIT bkpn_clear: FLUKE A3000FCKIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4465618 sr_ns: FLUKE4465618
r: 02646573 p: 1015.573 pid: 153803 b: MITUTOYO q: 0 st: lt: 8 ean: 4946368673202 sr: MITUTOYO 293-962-30 sr_no_br: 293-962-30 sr_no_br_cl: 29396230 sr_cl: MITUTOYO29396230 sr_dash: MITUTOYO 293 sold: 2031.146 p_range: none type: standard act: 1 avo: 1 av: Type of micrometer set Outdoor micrometer set Min. measuring range 0 mm Max. measuring range 75 mm Readout 0,001 mm Quantity per set 3 n: MITUTOYO 293-962-30 Digimatic screw mat set in storage box IP65 - 0-75mm cn: MICROMETER SET cn2: MICROMETER SET cn_clear: MICROMETERSET d: Product description: This metric screw gauge offers excellent accuracy, with and without data input and is very robust. ds: dsc: kts: Digimatic screw mat set in storage box IP65 - 0-75mm kpn: 293-962-30 kpn_dash: 293 kpn_clear: 29396230 bkpn: MITUTOYO 293-962-30 bkpn_clear: MITUTOYO 29396230 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Micrometer set | Home / Our brands / Mitutoyo / Mitutoyo tools / Mitutoyo measuring and inspection technique / Mitutoyo digital measuring and inspection instruments / Mitutoyo sets / Mitutoyo micrometer set sr_no_br_cl_ns: 29396230 sr_ns: MITUTOYO293-962-30
r: 02951281 p: 397.264 pid: 71990 b: FLUKE q: 0 st: lt: 6 ean: 0095969659475 sr: FLUKE 4297126 sr_no_br: 4297126 sr_no_br_cl: 4297126 sr_cl: FLUKE4297126 sr_dash: sold: 1986.32 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE T5-600/62MAX+/1ACE kit with infrared thermometer, electrical tester and voltage detector - 4297126 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description: This kit is designed to help electricians and HVAC technicians solve problems faster. First test for overheated electrical appliances using an IR thermometer and then use electrical test instruments to find out more about the problem. Features T5-600 voltage, continuity and current testers Automatically measures AC and DC voltage with accurate digital resolution. Displays resistance up to 1000 ? Simple and accurate OpenJaw current measurement. Continuity beep. Rugged enough to withstand a drop of 3 m (10 ft ). 600 V model. Automatic shutdown to save battery life. AC current. Display hold. All inputs of the T5-600 are protected according to EN61010-1 CAT III 600V. UL, CSA and VDE listed. Features Fluke 62 MAX+ Small in size. Big on ruggedness. Dust and water resistant: IP54 class. Rugged: 3 m (9.8 ft) drop tested. Ergonomically designed: Completely redesigned for a more natural hand fit. Distance to spot: 12:1. Dual lasers: Identifies the area to be measured. Large backlit display: Makes data easier to read, even in dark environments. C115 deluxe soft carrying case with shoulder strap. ds: dsc: Scope of delivery T5-600 electrical tester up to 600V 62 MAX+ IR thermometer kts: kit with infrared thermometer, electrical tester and voltage detector kpn: T5-600/62MAX+/1ACE kpn_dash: T5 kpn_clear: T560062MAX1ACE bkpn: FLUKE T5-600/62MAX+/1ACE bkpn_clear: FLUKE T560062MAX1ACE c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4297126 sr_ns: FLUKE4297126
r: 02071282 p: 1737.147 pid: 154155 b: MITUTOYO q: 0 st: lt: 8 ean: 4946368562865 sr: MITUTOYO 468-971 sr_no_br: 468-971 sr_no_br_cl: 468971 sr_cl: MITUTOYO468971 sr_dash: MITUTOYO 468 sold: 1737.147 p_range: none type: standard act: 1 avo: 1 av: Type of micrometer set Indoor micrometer set Min. measuring range 6 mm Max. measuring range 12 mm Readout 0,001 mm Quantity per set 3 n: MITUTOYO 468-971 Digimatic 3-point internal screw set with interchangeable head 6-12mm cn: MICROMETER SET cn2: MICROMETER SET cn_clear: MICROMETERSET d: Product description: These are three-point inside micrometers that offer you the following advantages: Interchangeable measuring head set. Titanium-coated measuring surfaces give excellent durability and shock resistance. They also have excellent resistance to water and dust (IP65 protection class), enabling you to use them in machine conditions with splashing coolant. Large LCD display with character height of 7.5 mm for easy-to-read measurements. With setting rings and extensions. ds: dsc: kts: Digimatic 3-point internal screw set with interchangeable head 6-12mm kpn: 468-971 kpn_dash: 468 kpn_clear: 468971 bkpn: MITUTOYO 468-971 bkpn_clear: MITUTOYO 468971 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Micrometer set | Home / Our brands / Mitutoyo / Mitutoyo tools / Mitutoyo measuring and inspection technique / Mitutoyo digital measuring and inspection instruments / Mitutoyo sets / Mitutoyo micrometer set sr_no_br_cl_ns: 468971 sr_ns: MITUTOYO468-971
r: 02057726 p: 1426.403 pid: 153859 b: MITUTOYO q: 0 st: lt: 8 ean: 4946368562872 sr: MITUTOYO 468-972 sr_no_br: 468-972 sr_no_br_cl: 468972 sr_cl: MITUTOYO468972 sr_dash: MITUTOYO 468 sold: 1426.403 p_range: none type: standard act: 1 avo: 1 av: Type of micrometer set Indoor micrometer set Min. measuring range 12 mm Max. measuring range 20 mm Readout 0,001 mm Quantity per set 2 n: MITUTOYO 468-972 Digimatic 3-point internal screwdriver set with interchangeable head 12-20mm cn: MICROMETER SET cn2: MICROMETER SET cn_clear: MICROMETERSET d: Product description: These are three-point inside micrometers that offer you the following advantages: Interchangeable measuring head set. Titanium-coated measuring surfaces give excellent durability and shock resistance. They also have excellent resistance to water and dust (IP65 protection class), enabling you to use them in machine conditions with splashing coolant. Large LCD display with character height of 7.5 mm for easy-to-read measurements. With setting rings and extensions. ds: dsc: kts: Digimatic 3-point internal screwdriver set with interchangeable head 12-20mm kpn: 468-972 kpn_dash: 468 kpn_clear: 468972 bkpn: MITUTOYO 468-972 bkpn_clear: MITUTOYO 468972 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Micrometer set | Home / Our brands / Mitutoyo / Mitutoyo tools / Mitutoyo measuring and inspection technique / Mitutoyo digital measuring and inspection instruments / Mitutoyo sets / Mitutoyo micrometer set sr_no_br_cl_ns: 468972 sr_ns: MITUTOYO468-972
r: 02951271 p: 384.247 pid: 71984 b: FLUKE q: 0 st: lt: 6 ean: 0095969659253 sr: FLUKE 4296076 sr_no_br: 4296076 sr_no_br_cl: 4296076 sr_cl: FLUKE4296076 sr_dash: sold: 768.494 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 62MAX+/323/1AC Combination set of current clamp, IR thermometer and VoltAlert voltage detector - 4296076 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description: Electricians and HVAC technicians solve problems faster with this kit. First check for overheated electrical appliances with an infrared thermometer, then use current clamp and voltage detector to further determine the problem Features 62 MAX+ IR thermometer Small in size. Big in robustness. Dust and water resistant: meets IP54. Rugged: tested to withstand a 3-metre drop. Ergonomically designed: completely redesigned for even greater comfort in the hand. Distance to measurement point: 12:1. Dual laser: identifies the area to be measured. Large backlit display: makes data easier to read, even in dark environments. Features 323 True-rms current clamp Robust. Reliable. Accurate. 400 A AC current measurement. 600 V AC and DC voltage measurement. True-RMS AC voltage and current measurement for accurate measurements on non-linear signals. Resistance measurement up to 40 k? with call-through test. Slim, ergonomic design. Safety specification CAT IV 300 V/CAT III 600 V. Features 1AC II Voltalert voltage detector Voltbeat technology and continuous self-test, so you always know it is working. When voltage is detected, the tip lights up and beeps. Voltage detection from 90 to 1000 V AC. CAT IV 1000 V for extra safety. ds: dsc: Scope of delivery Fluke 62 MAX+ infrared thermometer Fluke 323 True-RMS current clamp Fluke 1AC II VoltAlert voltage detector C115 carrying case kts: Combination set of current clamp, IR thermometer and VoltAlert voltage detector kpn: 62MAX+/323/1AC kpn_dash: kpn_clear: 62MAX3231AC bkpn: FLUKE 62MAX+/323/1AC bkpn_clear: FLUKE 62MAX3231AC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4296076 sr_ns: FLUKE4296076
r: 08107209 p: 698.436 pid: 72215 b: FLUKE q: 0 st: lt: 11 ean: 0095969724234 sr: FLUKE 4465665 sr_no_br: 4465665 sr_no_br_cl: 4465665 sr_cl: FLUKE4465665 sr_dash: sold: 698.436 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE A3001FC KIT FC wireless power kit - 4465665 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description The FC wireless a3001 power kit is suitable for measuring many common electrical parameters Fluke's 3000 FC Series wireless multimeter with the Fluke Connect app has all the necessary functions and features for easy troubleshooting when testing and measuring AC and DC voltage measurements up to 1000 V AC and DC current measurements with 0.01 mA resolution Continuity test, resistance measurement, diode test, capacitance and frequency measurements MIN/MAX recording CAT III 1000 V, Cat IV 600 V; IP54 The a3001 wireless iFlex current module allows measurements to be made on differently sized conductors or in confined spaces and makes wires more accessible Measurement up to 2500 A AC Use as a stand-alone meter or as part of the system Log function for recording and storing up to 65,000 measured values Inrush current function The FC wireless a3001 power kit is part of the Fluke Connect team of wireless measuring instruments Connect the a3001 FC wireless AC current module and flexible current clamp to your measurement point and read the results up to 20 metres away on the 3000 FC wireless digital multimeter. You save time with less running back and forth to make multiple measurements. Use the various modules for measurements on three-phase systems, as a standalone measuring instrument, or combine them with other Fluke Connect modules to create a system for making multiple measurements. At short distances, you can even read readings from modules through closed electrical distributors. You also no longer need to record data, as the FC wireless AC power module stores up to 65,000 sets of Min/Max/Avg time-stamped readings when using the optional PC adapter. Fluke Connect wireless measuring instruments also offer greater safety, as you can read read readings from a location other than the measurement point. Now you can take measurements on machines in motion, with only the measurement module potentially at risk. ds: dsc: Scope of delivery Fluke 3000 FC series wireless multimeter Fluke a3001 FC wireless iFlex AC power module TL175 test leads AC175 alligator clips Flexible iFlex current clamp kts: FC wireless power kit kpn: A3001FC KIT kpn_dash: kpn_clear: A3001FCKIT bkpn: FLUKE A3001FC KIT bkpn_clear: FLUKE A3001FCKIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4465665 sr_ns: FLUKE4465665
r: 08106995 p: 412.862 pid: 158873 b: FLUKE q: 0 st: lt: 8 ean: 0095969854252 sr: FLUKE 4910524 sr_no_br: 4910524 sr_no_br_cl: 4910524 sr_cl: FLUKE4910524 sr_dash: sold: 412.862 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE T6-600/62MAX+/1ACE electric tester with infrared thermometer and 1AC II in soft carrying case - 4910524 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description T6-600 FieldSense technology for measuring AC voltage, current and frequency without making electrical contact with active voltage (Voltage measurement requires a capacitive earth connection, provided by the user in most applications. In some situations earthing via the measurement lead is required) 1 to 600 V AC 0.1 to 200 A AC True-RMS AC voltage and current Resistance 1 Ohm to 2000 Ohm Works with most wires up to AWG 4/0 (120 mm2) with a jaw opening of 17.8 mm HOLD button temporarily freezes the reading for easy viewing Easy-to-read backlit display Compatible with the optional Fluke TPAK magnetic meter hanger clip for convenient operation Standard two-year warranty; extendable to 4 years by registering the product within 45 days of purchase Product description 62 MAX+ Dust and water resistance: conforms to protection class IP54, making it dust- and waterproof. Robustness: tested to withstand a 3-metre drop. Ergonomically designed: completely redesigned for an even more comfortable hand position. Small and lightweight; can be attached to your tool belt or a carrying strap and fits easily into your toolbox. Distance to measurement surface: precise laser technology ensures more accurate and reproducible measurements. Two lasers: the 62 MAX+ has two rotating lasers that help you identify the surface to be measured. The measurement surface is the plane between the points. Large, easy-to-read backlit display: the large screen makes data easier to read, even in dark environments. Min/Max/Avg/Dif: shows the minimum, maximum or average temperature or the difference between two measured values. Alarm: Alarms Hi and Lo for too high and too low values indicate when measured values fall outside the limits. Power supply: both the 62 MAX and 62 MAX+ are powered by a single standard AA battery. Product description 1AC II Voltbeat technology and continuous self-test - so you always know it is working When voltage is detected, the dot lights up and a beep sounds CAT IV 1000 V for extra protection Extended range: 0 V to 1000 V AC or 200 V to 1000 V AC, depending on model ds: dsc: Scope of delivery T6-600 electrical tester 62 MAX+ infrared thermometer 1AC II VoltAlert electrical tester C60 soft carrying case kts: electric tester with infrared thermometer and 1AC II in soft carrying case kpn: T6-600/62MAX+/1ACE kpn_dash: T6 kpn_clear: T660062MAX1ACE bkpn: FLUKE T6-600/62MAX+/1ACE bkpn_clear: FLUKE T660062MAX1ACE c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4910524 sr_ns: FLUKE4910524
r: 08095523 p: 230.36 pid: 127455 b: DEWALT q: 0 st: lt: 8 ean: 5054905315450 sr: DEWALT DW0887100-1 sr_no_br: DW0887100-1 sr_no_br_cl: DW08871001 sr_cl: DEWALTDW08871001 sr_dash: DEWALT DW0887100 sold: 230.36 p_range: none type: standard act: 1 avo: 1 av: Supplied in Case n: DEWALT DW0887100-1 SET battery cross line laser green + range finder 30m in TSTAK case - DW0887100-1 cn: LASER KIT cn2: LASER KIT cn_clear: LASERKIT d: Product description SET: Cross line laser Green + Distance meter 30m Features SET: Cross line laser Green + Distance meter 30m Supplied in TSTAK Case DW088CG-XJ Cross Line Laser Green DWHT77100-XJ Digital rangefinder 30m ds: DeWALT Power Month at Klium - Maximum savings! This DeWALT tool is part of the DeWALT Power Month at Klium. What does this mean? Spend €350 excl. VAT on DeWALT products and receive a free XR 18V 5.0Ah battery instantly (Klium only - automatically added to your shopping cart). Offer valid from 01.08.2026 through 31.08.2026 or while stocks last. Once it's gone, it's gone. dsc: Scope of delivery DW088CG-XJ cross line laser - green DWHT77100-XJ digital rangefinder 30m Magnetic target card green Glasses Wall mount 3x AA batteries Supplied in TSTAK case kts: battery cross line laser green + range finder 30m in TSTAK case kpn: DW0887100-1 SET kpn_dash: DW0887100 kpn_clear: DW08871001SET bkpn: DEWALT DW0887100-1 SET bkpn_clear: DEWALT DW08871001SET c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Laser kit | Home / Our brands / Dewalt / Dewalt tools / Dewalt measuring and inspection technique / Dewalt digital measuring and inspection instruments / Dewalt sets / Dewalt laser kit sr_no_br_cl_ns: DW08871001 sr_ns: DEWALTDW0887100-1
r: 08107151 p: 21358.953 pid: 158709 b: FLUKE q: 0 st: lt: 8 ean: 0195112124963 sr: FLUKE 5602257 sr_no_br: 5602257 sr_no_br_cl: 5602257 sr_cl: FLUKE5602257 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE SOL-TI-9HZ-KIT Solmetric HR IV Curve Tracer PVA-1500HE2 + TiS75 thermal imaging camera in case - 5602257 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description This tool kit, which includes the PVA-1500HE2 I-V curvetracer and TiS75+ thermal imaging camera, is designed to streamline the inspection process and ensure optimal performance of solar panels. The PVA-1500HE2 offers a range of advanced features, including the ability to process large amounts of I-V curvetracer measurement data. This provides fast and detailed performance data. The intuitive user interface allows easy navigation and real-time analysis, so that potential problems can be identified immediately. In addition, the TiS75+ thermal imaging camera provides accurate thermal imaging technology to detect anomalies such as hotspots and faulty connections. This tool kit enables solar professionals to maximise the efficiency and reliability of solar installations, from commissioning and troubleshooting to routine inspections and performance optimisation. Using a thermal imaging camera such as the Fluke TiS75+ at a PV site with solar panels can help improve system performance, reduce maintenance costs and extend the life of solar panels and associated components. Thermal inspections with the Ti75+ can help to: find hotspots on solar panels that indicate damage or underperformance identify electrical problems such as loose or corroded connections prevent critical problems and extend system lifetime ensuring correct installation and safe operation monitor system performance and detect degradation or abnormalities assess shade problems that may affect energy production Key features PVA-1500HE2 Measures and displays I-V curves up to 1500 V and 30 A, also on high-efficiency modules Advanced built-in PV model provides instant monitoring of PV performance Wireless interfaces for faster installation, safer working environment and freedom of movement during PV troubleshooting Automates data management, analysis and reporting TiS75+ key features 384 x 288 infrared resolution Asset tagging IR Fusion touch screen IS3 and AVI video recording Measures up to 550 °C Dew point calculation ds: dsc: Scope of delivery PVA-1500HE2: PVA-1500 V device SolSensor and current clamp Measurement cable with alligator clips MC4 disconnect device Chargers 2x thermocouples and self-adhesive discs Cleaning agent for sensor Transport case (included with the PVA-1500HE2) Available for free download: PVA application and data analysis tool TiS75+: Thermal imaging camera Mains adapter (including universal mains adapters) Smart battery charger with two compartments Two robust smart lithium-ion batteries USB cable 4 GB micro SD card Rugged carrying case with soft carrying case and adjustable hand strap Available for free download: Fluke Connect software kts: Solmetric HR IV Curve Tracer PVA-1500HE2 + TiS75 thermal imaging camera in case kpn: SOL-TI-9HZ-KIT kpn_dash: SOL kpn_clear: SOLTI9HZKIT bkpn: FLUKE SOL-TI-9HZ-KIT bkpn_clear: FLUKE SOLTI9HZKIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 5602257 sr_ns: FLUKE5602257
r: 08107150 p: 17573.829 pid: 158665 b: FLUKE q: 0 st: lt: 8 ean: 0195112124987 sr: FLUKE 5602278 sr_no_br: 5602278 sr_no_br_cl: 5602278 sr_cl: FLUKE5602278 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE SOL-INS87-KIT Solmetric HR IV Curve Tracer PVA-1500HE2 + current clamp + insulation and multimeter in case - 5602278 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description PVA-1500HE2 Measures and displays I-V curves up to 1500 V and 30 A, also on high-efficiency modules Advanced built-in PV model provides instant monitoring of PV performance Sweep-to-sweep delay of 9 seconds to measure 3.5 MW within 1 hour Uninterrupted measurements even in hot environments Automates data management, analysis and reporting Database of more than 70,000 modules with automatic updates Wireless interfaces for faster installation, safer working environment and freedom of movement during PV troubleshooting Ready for on-site firmware update Product description 393 FC Measure safely with a current clamp that meets safety specification CAT III 1500 V Thin jaws for access to cables in crowded combiner boxes Rugged and rated to IP54 for outdoor use Work efficiently with DC power measurement, audio polarity and visual continuity Product description 87V A unique feature for accurate voltage and frequency measurements at variable speed drives and other equipment causing electrical disturbances (87V). A built-in thermometer makes it easy to take temperature measurements without having to carry a separate instrument (87V). Optional magnetic hanging clip for easy installation and reading while leaving your hands free for other tasks. With its large-digit display and bright backlight with two levels of illumination, the 80 Series V is significantly easier to read than older models. Product description 1587 FC PI/DAR measurements with TrendIt graphs Memory storage via the Fluke Connect Measurements app Temperature compensation via the Fluke Connect Measurements app Low-pass filter for frequency-controlled drives, for accurate measurements on motor drives Insulation test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V Insulation test: 0.01 MOhm to 2.0 GOhm Automatic discharge of capacitive voltages Smoothed reading of insulation test values Frequency Capacitance Diode test Temperature Min/Max AC/DC voltage DC in millivolts AC/DC in milliamps Resistance (0.1 Ohm to 50 MOhm) Passage Three-year warranty External probe, test leads, alligator clips Thermocouple type K Automatic switch-off ds: dsc: Scope of delivery PVA-1500HE2 PVA-1500 V device SolSensor and current clamp Measurement cable with alligator clips MC4 disconnector Chargers 2x thermocouples and self-adhesive discs Cleaning agent for sensor Transport case (included with the PVA-1500HE2) Available for free download: PVA application and data analysis tool 393 FC 393 FC CAT III 1500 V TRMS current clamp Test leads, safety specification CAT III 1500 V, angled plugs, with safety caps iFlex 18-inch flexible current clamp TPAK magnetic suspension strap Premium carrying case 87V 87V industrial multimeter TL75 measuring leads (TL175 Eur) AC 175 crocodile clips Holster with tilt pocket for test leads 80BK temperature measuring probe 9 V battery (installed) 1587 FC 1587 FC insulation multimeter Remote probe Measurement leads Crocodile clips Thermocouple type K Soft case kts: Solmetric HR IV Curve Tracer PVA-1500HE2 + current clamp + insulation and multimeter in case kpn: SOL-INS87-KIT kpn_dash: SOL kpn_clear: SOLINS87KIT bkpn: FLUKE SOL-INS87-KIT bkpn_clear: FLUKE SOLINS87KIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 5602278 sr_ns: FLUKE5602278
r: 08107149 p: 17474.656 pid: 158708 b: FLUKE q: 0 st: lt: 8 ean: 0195112124994 sr: FLUKE 5602284 sr_no_br: 5602284 sr_no_br_cl: 5602284 sr_cl: FLUKE5602284 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE SOL-INS37-KIT Solmetric HR IV Curve Tracer PVA-1500HE2 + 1537 insulation resistance tester in case - 5602284 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description Combining the precision of the PVA-1500HE2 I-V curvetracer with the advanced capabilities of the Fluke 1537 insulation tester, this tool kit provides comprehensive solar panel diagnostics. The PVA-1500HE2 offers a range of advanced features, including the ability to process large amounts of I-V curvetracer measurement data. This provides fast and detailed performance data. The intuitive user interface allows easy navigation and real-time analysis, so that potential problems can be identified immediately. In addition, the 1537 insulation tester offers insulation resistance tests up to 2500 V, helping to detect potential safety hazards and prevent system failures. Together, these tools enable solar professionals to confidently ensure the efficiency, reliability and safety of solar installations, from commissioning and routine maintenance to troubleshooting and performance optimisation. The 1537 insulation tester is an ideal electrical test solution that ensures the safety, reliability and performance of solar systems with its 2500 V capabilities. Insulation resistance testing with the 1537 is crucial for: checking the integrity of cables and components checking the insulation of wiring to prevent possible faults such as short circuits during installation detecting wear and tear detecting faults or insulation problems ensuring the system meets safety standards during compliance tests capture test results for compliance audits and performance analysis Key features PVA-1500HE2 Measures and displays I-V curves up to 1500 V and 30 A, also on high-efficiency modules Advanced built-in PV model provides instant monitoring of PV performance Wireless interfaces for faster installation, safer working environment and freedom of movement during PV troubleshooting Automates data management, analysis and reporting Check cable integrity with 2500 V insulation resistance tests Key features 1537 insulation resistance tester Selectable voltage tests: customise your tests with user-selectable voltages of 250 V, 500 V, 1,000 V and 2,500 V for both industrial and solar power applications. Comprehensive insulation resistance measurement: Achieve insulation resistance measurement up to 500 GOhm for in-depth analysis. Intelligent calculations: Automatically calculates polarisation index (PI) and dielectric absorption ratio (DAR, Dielectric Absorption Ratio), minimising the influence of environmental factors. High measurement capacity: perform up to 1,300 measurements at 2,500 V or 6,500 measurements at 250 V with a single set of batteries, increasing productivity. Enhanced safety features: Benefit from a CAT IV specification of 600V and a built-in voltage alarm function for increased safety during operations. Comprehensive measurements: The Fluke 1537 expands your testing capabilities with AC/DC voltage and resistance measurements. Stable resistance measurements: Faster and more stable insulation resistance measurements with up to 5 mA short-circuit current. Fine-tunable test voltage: Adjust the test voltage from 250 V to 2500 V in 100 V steps to meet specific test requirements. Dielectric discharge rate calculation: Automatically calculate the dielectric discharge rate (DD, Discharge Rate) to help identify problems with inaccessible insulation. Slope test mode: Linearly increase the applied test voltage by 100 V/s to identify potentially hard-to-identify faults. Visual and audible continuity indicator: Check continuity visually on the screen or with the audible indicator, so you can concentrate on your test procedure without looking at the display. Customisable test parameters: Set user-defined labels, adjust test duration and save measurement results for a customised testing experience. Effortless data management: Download and manage data effortlessly with the included PC software. Extended warranty: Enjoy peace of mind with an extended 3-year warranty. ds: dsc: Scope of delivery PVA-1500HE2: PVA-1500 V device SolSensor and current clamp Measurement cable with alligator clips MC4 disconnect device Chargers 2x thermocouples and self-adhesive discs Cleaning agents for sensor Transport case Available for free download: PVA application and data analysis tool 1537: Insulation resistance tester Test leads with alligator clips (red, black, green) Probe (red, black) Carrying case USB cable PC software (downloadable from Fluke website) kts: Solmetric HR IV Curve Tracer PVA-1500HE2 + 1537 insulation resistance tester in case kpn: SOL-INS37-KIT kpn_dash: SOL kpn_clear: SOLINS37KIT bkpn: FLUKE SOL-INS37-KIT bkpn_clear: FLUKE SOLINS37KIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 5602284 sr_ns: FLUKE5602284
