r: 02690004 p: 14.008 pid: 44777 b: WERA q: 1 st: 1 lt: 1 ean: 4013288017758 sr: WERA 05017015001 sr_no_br: 05017015001 sr_no_br_cl: 05017015001 sr_cl: WERA05017015001 sr_dash: sold: 98.056 p_range: none type: standard act: 1 avo: 1 av: Drive size PH3 Blade length 150 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips n: WERA 917 SPH Phillips screwdriver, PH 3 x 150 mm - 05017015001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera chiseldriver for screwdriving, chiseling, mortising and slackening stuck screws. With multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The pound-thru hexagonal blade made of premium bit material ensures power transmission without loss even at hammer blows. Tough tempered material to prevent the blade from splintering or breaking. With integrated impact cap to increase service life and reduce risk of splintering. Higher torques can be transmitted with open-end or ring spanners using the integrated hexagon bolster. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. With hexagon anti-roll protection to avoid bits from rolling away annoyingly in the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Multi-component Kraftform handle for fast and ergonomic screwdriving Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Phillips screws Blade Hexagonal throughout with impact cap, hexagonal bolster for sizes 1 - 4 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, size 4/200: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 917 SPH Screwdriver for Phillips screws, PH 3 x 150 mm kts: Phillips screwdriver, PH 3 x 150 mm kpn: 917 SPH kpn_dash: kpn_clear: 917SPH bkpn: WERA 917 SPH bkpn_clear: WERA 917SPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05017015001 sr_ns: WERA05017015001
r: 08073519 p: 10.86 pid: 31063 b: WIHA q: 0 st: lt: 6 ean: 4010995365363 sr: WIHA 36536 sr_no_br: 36536 sr_no_br_cl: 36536 sr_cl: WIHA36536 sr_dash: sold: 97.74 p_range: KLIUM_PRODUCT_RANGE_341 type: standard act: 1 avo: 1 av: Drive size T10 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Torx Product Range Wiha SoftFinish n: WIHA 3251010 screwdriver SoftFinish electric slimFix Torx T10 x 100 mm - 36536 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control. Protects your health: With the patented SoftFinish handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs. Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC. Increases your safety: Wiha slim blades ensure unlimited, protected access to deep-set screws. Product dimensions: 204 x 23 x 23 mm (LxWxD) Application: For work in the area of live parts up to 1,000 V AC. Material: Chrome-vanadium-molybdenum steel, black finish, insulated Standards: DIN ISO 8764-PH. Ergonomic working - Recommended by doctors and therapists of the German Campaign for Healthier Backs Wiha handle size concept - powerful and sensitive fastening SlimBits allow access to low-lying screws thanks to inserted insulation Safe operation up to 1,000 V AC Fastening screws by hand causes considerable strain on wrists and muscles in the long term. The highly ergonomically shaped SoftFinish screwdriver provides a remedy, ensuring optimal transmission of hand force. The different handle heights are always matched to the fastening. The long, slender handle heights can be used to fasten small screws quickly and firmly. There are also large-volume handle heights to fasten large screws which can be used to apply greater torques. The roll-off protection and screw symbol printed on the handle end ensure users work efficiently. With the Wiha slimTECHNOLOGY specially developed for electric applications, the protective insulation has been integrated into the blade, thus allowing blades which are up to 33% slimmer. This means low-lying screw and spring elements can easily be reached. These insulated screwdrivers undergo routine individual piece testing as per the international IEC 60900 standard, thus providing users with a tool to work safely on live parts up to 1,000 V AC. VDE and GS tested Manufactured acc. to IEC 60900. ds: dsc: kts: screwdriver SoftFinish electric slimFix Torx T10 x 100 mm kpn: 3251010 kpn_dash: kpn_clear: 3251010 bkpn: WIHA 3251010 bkpn_clear: WIHA 3251010 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wiha / Wiha tools / Wiha hand tools / Wiha screwdrivers and bits / Wiha screwdrivers / Wiha screwdriver | Home / Our brands / Wiha / Wiha Ranges / Wiha softfinish sr_no_br_cl_ns: 36536 sr_ns: WIHA36536
r: 02832470 p: 9.752 pid: 42936 b: WERA q: 1 st: 1 lt: 1 ean: 4013288017789 sr: WERA 05017052001 sr_no_br: 05017052001 sr_no_br_cl: 05017052001 sr_cl: WERA05017052001 sr_dash: sold: 97.52 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ2 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Pozidriv n: WERA 918 SPZ Pozidriv screwdriver, PZ 2 x 100 mm - 05017052001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera chiseldriver for screwdriving, chiseling, mortising and slackening stuck screws. With multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The pound-thru hexagonal blade made of premium bit material ensures power transmission without loss even at hammer blows. Tough tempered material to prevent the blade from splintering or breaking. With integrated impact cap to increase service life and reduce risk of splintering. Higher torques can be transmitted with open-end or ring spanners using the integrated hexagon bolster. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. With hexagon anti-roll protection to avoid bits from rolling away annoyingly in the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Multi-component Kraftform handle for fast and ergonomic screwdriving Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Suitable for Pozidriv screws Blade Hexagonal throughout with impact cap, hexagonal bolster for sizes 1 - 4 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, size 4/200: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 918 SPZ Screwdriver for Pozidriv screws, PZ 2 x 100 mm kts: Pozidriv screwdriver, PZ 2 x 100 mm kpn: 918 SPZ kpn_dash: kpn_clear: 918SPZ bkpn: WERA 918 SPZ bkpn_clear: WERA 918SPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05017052001 sr_ns: WERA05017052001
r: 02835682 p: 10.63 pid: 43727 b: WERA q: 1 st: 1 lt: 1 ean: 4013288108661 sr: WERA 05118184001 sr_no_br: 05118184001 sr_no_br_cl: 05118184001 sr_cl: WERA05118184001 sr_dash: sold: 95.67 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size T8 Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Product Range Wera Kraftform n: WERA 2067 TORX HF Kraftform screwdriver with holding function, TX 8 x 60 mm - 05118184001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. With practical holding function: The clamping force resulting from the seating stress between the tip and the screw profile keeps the screws securely on the tool. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro TORX® HF screwdriver with holding function for recessed TORX® screws Multi-component Kraftform Micro handle with anti-roll feature and rotating cap The Wera Black Point tip offers an exact fit and optimum corrosion protection Holding function for TORX® screws, chrome-plated Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Global Technologies Inc. specifications, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2067 TORX® HF Screwdriver with holding function for electronic applications, TX 8 x 60 mm kts: Kraftform screwdriver with holding function, TX 8 x 60 mm kpn: 2067 TORX HF kpn_dash: kpn_clear: 2067TORXHF bkpn: WERA 2067 TORX HF bkpn_clear: WERA 2067TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118184001 sr_ns: WERA05118184001
r: 02835680 p: 10.63 pid: 43715 b: WERA q: 1 st: 1 lt: 1 ean: 4013288108647 sr: WERA 05118182001 sr_no_br: 05118182001 sr_no_br_cl: 05118182001 sr_cl: WERA05118182001 sr_dash: sold: 95.67 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size T6 Blade length 40 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Product Range Wera Kraftform n: WERA 2067 TORX HF Kraftform screwdriver with holding function, TX 6 x 40 mm - 05118182001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. With practical holding function: The clamping force resulting from the seating stress between the tip and the screw profile keeps the screws securely on the tool. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro TORX® HF screwdriver with holding function for recessed TORX® screws Multi-component Kraftform Micro handle with anti-roll feature and rotating cap The Wera Black Point tip offers an exact fit and optimum corrosion protection Holding function for TORX® screws, chrome-plated Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Global Technologies Inc. specifications, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2067 TORX® HF Screwdriver with holding function for electronic applications, TX 6 x 40 mm kts: Kraftform screwdriver with holding function, TX 6 x 40 mm kpn: 2067 TORX HF kpn_dash: kpn_clear: 2067TORXHF bkpn: WERA 2067 TORX HF bkpn_clear: WERA 2067TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118182001 sr_ns: WERA05118182001
r: 02835149 p: 10.6 pid: 41612 b: WERA q: 0 st: lt: 12 ean: 4013288039132 sr: WERA 05030112001 sr_no_br: 05030112001 sr_no_br_cl: 05030112001 sr_cl: WERA05030112001 sr_dash: sold: 95.4 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size PH1 Blade length 80 mm Blade thickness ESD Yes Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips Product Range Wera Kraftform n: WERA 1550 PH ESD Micro Kraftform Phillips screwdriver, PH 1 x 80 mm - 05030112001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description ESD-safe Micro screwdriver. Dependable protection against electrostatic energy and associated damage. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver for cross-recess screws, Phillips ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handle for fast and ergonomic screwdriving The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Phillips screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (red = Phillips) and size stamp. Features and benefits The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Multi-component screwdriver handle for ergonomic working. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 1550 PH ESD Kraftform Micro screwdriver for Phillips screws, PH 1 x 80 mm kts: Kraftform Phillips screwdriver, PH 1 x 80 mm kpn: 1550 PH ESD Micro kpn_dash: kpn_clear: 1550PHESDMicro bkpn: WERA 1550 PH ESD Micro bkpn_clear: WERA 1550PHESDMicro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05030112001 sr_ns: WERA05030112001
r: 02830647 p: 10.578 pid: 43166 b: WERA q: 0 st: lt: 16 ean: 4013288108029 sr: WERA 05007640001 sr_no_br: 05007640001 sr_no_br_cl: 05007640001 sr_cl: WERA05007640001 sr_dash: sold: 95.202 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 8 mm Blade length 175 mm Blade thickness 1,6 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 334 saw blade screwdriver, garage blade, 1.6 x 8 x 175 mm - 05007640001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Slotted screwdriver - workshop blade Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. ds: dsc: Scope of delivery 334 Screwdriver for slotted screws, 1.6 x 8 x 175 mm kts: saw blade screwdriver, garage blade, 1.6 x 8 x 175 mm kpn: 334 kpn_dash: kpn_clear: 334 bkpn: WERA 334 bkpn_clear: WERA 334 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05007640001 sr_ns: WERA05007640001
r: 41851289 p: 10.578 pid: 48410 b: BAHCO q: 3 st: 1 lt: 1 ean: 7314150010745 sr: BAHCO BE-8160 sr_no_br: BE-8160 sr_no_br_cl: BE8160 sr_cl: BAHCOBE8160 sr_dash: BAHCO BE sold: 95.202 p_range: KLIUM_PRODUCT_RANGE_118 type: standard act: 1 avo: 1 av: Drive size Slotted 8 mm Blade length 125 mm Blade thickness 1,2 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Bahco ERGO n: BAHCO BE-8160 screwdriver ERGO with three-component handle double handle slot 1.6 mm x 8 mm x 125 mm cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description: Screwdriver developed according to the scientific ERGO process Screwdriver for slotted head screws Handle: 3-component handle, for maximum user comfort and force transmission Easy to choose the right tip, with the colour-coded handle and the symbol on the domed end Blade: High performance alloy steel. Chrome plated and entirely hardened. Black finish tip for higher accuracy ISO 2380 / DIN 5264 Hexagon profile blade and bolster for wrench assisted turning ds: dsc: kts: screwdriver ERGO with three-component handle double handle slot 1.6 mm x 8 mm x 125 mm kpn: BE-8160 kpn_dash: BE kpn_clear: BE8160 bkpn: BAHCO BE-8160 bkpn_clear: BAHCO BE8160 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Bahco / Bahco tools / Bahco hand tools / Bahco screwdrivers and bits / Bahco screwdrivers / Bahco screwdriver | Home / Our brands / Bahco / Bahco Ranges / Bahco ergo sr_no_br_cl_ns: BE8160 sr_ns: BAHCOBE-8160
r: 41851319 p: 10.51 pid: 49142 b: BAHCO q: 0 st: lt: 7 ean: 7314150027811 sr: BAHCO BE-8930 sr_no_br: BE-8930 sr_no_br_cl: BE8930 sr_cl: BAHCOBE8930 sr_dash: BAHCO BE sold: 94.59 p_range: KLIUM_PRODUCT_RANGE_118 type: standard act: 1 avo: 1 av: Drive size T30 Blade length 150 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Product Range Bahco ERGO n: BAHCO BE-8930 screwdriver ERGO with three-component handle TORX T30 x 150 mm cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description: Screwdriver developed according to the scientific ERGO process Screwdriver for TORX® head screws Handle: 3-component handle, for maximum user comfort and force transmission Easy to choose the right tip, with the colour-coded handle and the symbol on the domed end Blade: High performance alloy steel. Chrome plated and entirely hardened. Black finish tip for higher accuracy ds: dsc: kts: screwdriver ERGO with three-component handle TORX T30 x 150 mm kpn: BE-8930 kpn_dash: BE kpn_clear: BE8930 bkpn: BAHCO BE-8930 bkpn_clear: BAHCO BE8930 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Bahco / Bahco tools / Bahco hand tools / Bahco screwdrivers and bits / Bahco screwdrivers / Bahco screwdriver | Home / Our brands / Bahco / Bahco Ranges / Bahco ergo sr_no_br_cl_ns: BE8930 sr_ns: BAHCOBE-8930
r: 41851343 p: 10.51 pid: 49170 b: BAHCO q: 3 st: 1 lt: 1 ean: 7314150048298 sr: BAHCO BE-8810S sr_no_br: BE-8810S sr_no_br_cl: BE8810S sr_cl: BAHCOBE8810S sr_dash: BAHCO BE sold: 94.59 p_range: KLIUM_PRODUCT_RANGE_118 type: standard act: 1 avo: 1 av: Drive size PZ1 Blade length 80 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Pozidriv Product Range Bahco ERGO n: BAHCO BE-8810S screwdriver ERGO insulated VDE with three-component handle Pozidriv PZ1 x 27 mm x 80 mm cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description: Screwdriver developed according to the scientific ERGO process Insulated screwdriver for Pozidriv head screws For work on live equipment, up to 1000V Handle: 3-component handle, for maximum user comfort and force transmission Easy to choose the right tip, thanks to the colour-coded handle and the symbol on the domed end Blade: High performance alloy steel, insulation moulded directly onto blade. Black finish tip for higher accuracy ISO 8764 Individually inspected and manufactured according to IEC 60900 ds: dsc: kts: screwdriver ERGO insulated VDE with three-component handle Pozidriv PZ1 x 27 mm x 80 mm kpn: BE-8810S kpn_dash: BE kpn_clear: BE8810S bkpn: BAHCO BE-8810S bkpn_clear: BAHCO BE8810S c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Bahco / Bahco tools / Bahco hand tools / Bahco screwdrivers and bits / Bahco screwdrivers / Bahco screwdriver | Home / Our brands / Bahco / Bahco Ranges / Bahco ergo sr_no_br_cl_ns: BE8810S sr_ns: BAHCOBE-8810S
r: 02606094 p: 8.595 pid: 68930 b: STANLEY q: 0 st: lt: 8 ean: 3253561653391 sr: STANLEY 1-65-339 sr_no_br: 1-65-339 sr_no_br_cl: 165339 sr_cl: STANLEY165339 sr_dash: STANLEY 1 sold: 94.545 p_range: KLIUM_PRODUCT_RANGE_299 type: standard act: 1 avo: 1 av: Drive size PZ4 Drive type Pozidriv Blade length 200 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Product Range Stanley Fatmax n: STANLEY 1-65-339 FATMAX screwdriver Pozidriv PZ4 x 200mm cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description FatMax Screwdriver Pozidriv PZ4 X 200mm Features Handle formed directly on the blade - virtually unbreakable High-quality steel blade - high resistance and reduced risk of tip breakage Ergonomic handle - bimaterial, non-slip, excellent grip and reduces fatigue Large-diameter handle - sufficient torque for wood screws - and narrow neck - for quick turning Rounded end of handle - for comfortable and smooth turning movements Colour coded BLUE - quick identification of the right screwdriver for each type of screw ds: dsc: kts: FATMAX screwdriver Pozidriv PZ4 x 200mm kpn: 1-65-339 kpn_dash: 1 kpn_clear: 165339 bkpn: STANLEY 1-65-339 bkpn_clear: STANLEY 165339 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Stanley / Stanley tools / Stanley hand tools / Stanley screwdrivers and bits / Stanley screwdrivers / Stanley screwdriver | Home / Our brands / Stanley / Stanley Ranges / Stanley fatmax sr_no_br_cl_ns: 165339 sr_ns: STANLEY1-65-339
r: 02606086 p: 8.595 pid: 70105 b: STANLEY q: 0 st: lt: 8 ean: 3253561653179 sr: STANLEY 1-65-317 sr_no_br: 1-65-317 sr_no_br_cl: 165317 sr_cl: STANLEY165317 sr_dash: STANLEY 1 sold: 94.545 p_range: KLIUM_PRODUCT_RANGE_299 type: standard act: 1 avo: 1 av: Drive size PH4 Drive type Phillips Blade length 200 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Product Range Stanley Fatmax n: STANLEY 1-65-317 FATMAX screwdriver Phillips PH4 x 200mm cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description FatMax Screwdriver Phillips PH4 X 200mm Features Handle formed directly on the blade - virtually unbreakable High-quality steel blade - high resistance and reduced risk of tip breakage Ergonomic handle - bimaterial, non-slip, excellent grip and reduces fatigue Large-diameter handle - sufficient torque for wood screws - and narrow neck - for fast turning action Rounded end of handle - for comfortable and smooth turning movements Colour-coded YELLOW - quick identification of the right screwdriver for each type of screw ds: dsc: kts: FATMAX screwdriver Phillips PH4 x 200mm kpn: 1-65-317 kpn_dash: 1 kpn_clear: 165317 bkpn: STANLEY 1-65-317 bkpn_clear: STANLEY 165317 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Stanley / Stanley tools / Stanley hand tools / Stanley screwdrivers and bits / Stanley screwdrivers / Stanley screwdriver | Home / Our brands / Stanley / Stanley Ranges / Stanley fatmax sr_no_br_cl_ns: 165317 sr_ns: STANLEY1-65-317
r: 02606163 p: 5.56 pid: 68948 b: STANLEY q: 0 st: lt: 8 ean: 3253561654060 sr: STANLEY 1-65-406 sr_no_br: 1-65-406 sr_no_br_cl: 165406 sr_cl: STANLEY165406 sr_dash: STANLEY 1 sold: 94.52 p_range: KLIUM_PRODUCT_RANGE_299 type: standard act: 1 avo: 1 av: Drive size PH1 Drive type Phillips Blade length 30 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Product Range Stanley Fatmax n: STANLEY 1-65-406 FATMAX screwdriver Phillips PH1 x 30mm cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description FatMax Screwdriver Phillips PH1 X 30mm Features Handle formed directly on the blade - virtually unbreakable High-quality steel blade - high resistance and reduced risk of tip breakage Ergonomic handle - bimaterial, non-slip, excellent grip and reduces fatigue Large-diameter handle - sufficient torque for wood screws - and narrow neck - for fast turning action Rounded end of handle - for comfortable and smooth turning movements Colour-coded YELLOW - quick identification of the right screwdriver for each type of screw ds: dsc: kts: FATMAX screwdriver Phillips PH1 x 30mm kpn: 1-65-406 kpn_dash: 1 kpn_clear: 165406 bkpn: STANLEY 1-65-406 bkpn_clear: STANLEY 165406 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Stanley / Stanley tools / Stanley hand tools / Stanley screwdrivers and bits / Stanley screwdrivers / Stanley screwdriver | Home / Our brands / Stanley / Stanley Ranges / Stanley fatmax sr_no_br_cl_ns: 165406 sr_ns: STANLEY1-65-406
r: 02832435 p: 18.842 pid: 42914 b: WERA q: 0 st: lt: 12 ean: 4013288017765 sr: WERA 05017020001 sr_no_br: 05017020001 sr_no_br_cl: 05017020001 sr_cl: WERA05017020001 sr_dash: sold: 94.21 p_range: none type: standard act: 1 avo: 1 av: Drive size PH4 Blade length 200 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips n: WERA 917 SPH Phillips screwdriver, PH 4 x 200 mm - 05017020001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera Chiseldriver for fastening, chiselling and loosening seized screws. Single-component Kraftfrom handle for fast and low-fatigue working. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Comes with an impact cap for durability and reduced risk of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Single-component, ergonomic Kraftform handle Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Phillips screws Blade Hexagonal throughout with impact cap, hexagonal bolster for sizes 1 - 4 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, size 4/200: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 917 SPH Screwdriver for Phillips screws, PH 4 x 200 mm kts: Phillips screwdriver, PH 4 x 200 mm kpn: 917 SPH kpn_dash: kpn_clear: 917SPH bkpn: WERA 917 SPH bkpn_clear: WERA 917SPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05017020001 sr_ns: WERA05017020001
r: 02606066 p: 4.48 pid: 68917 b: STANLEY q: 0 st: lt: 8 ean: 3253561650178 sr: STANLEY 1-65-017 sr_no_br: 1-65-017 sr_no_br_cl: 165017 sr_cl: STANLEY165017 sr_dash: STANLEY 1 sold: 94.08 p_range: KLIUM_PRODUCT_RANGE_299 type: standard act: 1 avo: 1 av: Drive size Slotted 4 mm Drive type Slotted Blade length 100 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Product Range Stanley Fatmax n: STANLEY 1-65-017 FATMAX screwdriver parallel 4 x 100mm cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description FatMax Screwdriver Parallel 4 X 100mm Features Handle formed directly on the blade - virtually unbreakable High-quality steel blade - high resistance and reduced risk of tip breakage Ergonomic handle - bimaterial, non-slip, excellent grip and reduces fatigue Large-diameter handle - sufficient torque for wood screws - and narrow neck - for fast turning action Rounded end of handle - for comfortable and smooth turning movements Colour coded RED - quick identification of the right screwdriver for each type of screw ds: dsc: kts: FATMAX screwdriver parallel 4 x 100mm kpn: 1-65-017 kpn_dash: 1 kpn_clear: 165017 bkpn: STANLEY 1-65-017 bkpn_clear: STANLEY 165017 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Stanley / Stanley tools / Stanley hand tools / Stanley screwdrivers and bits / Stanley screwdrivers / Stanley screwdriver | Home / Our brands / Stanley / Stanley Ranges / Stanley fatmax sr_no_br_cl_ns: 165017 sr_ns: STANLEY1-65-017
r: 02832527 p: 10.413 pid: 43289 b: WERA q: 0 st: lt: 16 ean: 4013288181602 sr: WERA 05100086001 sr_no_br: 05100086001 sr_no_br_cl: 05100086001 sr_cl: WERA05100086001 sr_dash: sold: 93.717 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 7 mm Drive type Slotted Blade length 125 mm Blade thickness 1,2 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V n: WERA 932 A SB cutting screwdriver, 1.2 x 7 x 125 mm - 05100086001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera chiseldriver for screwdriving, chiseling, mortising and slackening stuck screws. With multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The pound-thru hexagonal blade made of premium bit material ensures power transmission without loss even at hammer blows. Tough tempered material to prevent the blade from splintering or breaking. With integrated impact cap to increase service life and reduce risk of splintering. Higher torques can be transmitted with open-end or ring spanners using the integrated hexagon bolster. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. With hexagon anti-roll protection to avoid bits from rolling away annoyingly in the workplace. Chiseldriver for fastening, chiselling and loosening Smooth hard zones for high speed turning, soft grip zones for high torque transfer Multi-component Kraftform handle for fast and ergonomic screwdriving Hexagonal blade extending through the handle, impact cap with integrated square and bolster The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted screws Blade Hexagonal throughout with impact cap, hexagonal bolster from 0.8 x 4.5 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 932 A SB Screwdriver for slotted screws, 1.2 x 7 x 125 mm kts: cutting screwdriver, 1.2 x 7 x 125 mm kpn: 932 A SB kpn_dash: kpn_clear: 932ASB bkpn: WERA 932 A SB bkpn_clear: WERA 932ASB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05100086001 sr_ns: WERA05100086001
r: 02094534 p: 10.41 pid: 42153 b: WERA q: 0 st: lt: 9 ean: 4013288032072 sr: WERA 05118060001 sr_no_br: 05118060001 sr_no_br_cl: 05118060001 sr_cl: WERA05118060001 sr_dash: sold: 93.69 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size HEX 0,7 mm Blade length 40 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Hexagon Product Range Wera Kraftform n: WERA 2054 Micro Kraftform hexagonal screwdriver, 0.7 x 40 mm - 05118060001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for hexagon socket screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving The Wera Black Point tip offers an exact fit and optimum corrosion protection Hex-Plus allows socket head screws to live longer Take it easy tool finder: colour coding according to profile and size Application Hexagon socket screws Blade Round Design Hex-Plus, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2054 Screwdriver for hexagon socket screws for electronic applications, 0.7 x 40 mm kts: Kraftform hexagonal screwdriver, 0.7 x 40 mm kpn: 2054 Micro kpn_dash: kpn_clear: 2054Micro bkpn: WERA 2054 Micro bkpn_clear: WERA 2054Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118060001 sr_ns: WERA05118060001
