r: 03030035 p: 99.338 pid: 87665 b: RENOLD q: 0 st: lt: 15 ean: 0673766013319 sr: RENOLD 140A1S58I sr_no_br: 140A1S58I sr_no_br_cl: 140A1S58I sr_cl: RENOLD140A1S58I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 3/4 inch; 44,45 mm Length (pin) 52,9 mm Product line Renold Blue Weight (kg/m) 7,8 kg/m Thickness (outer plate) 5,61 mm Type (ISO/ANSI) 140-1 Height 5,2 Inside width 25,23 mm Breaking strength 170000 N Diameter (pin) 12,71 mm Thickness (inner plate) 5,61 mm Plate height 42,23 mm Number of the connecting link 58 Version (link) Simplex n: RENOLD BLUE 140-1 No. 58 closing link simplex 1 3/4" - 140A1S58I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 1 3/4" kpn: BLUE 140-1 No. 58 kpn_dash: BLUE 140 kpn_clear: BLUE1401No58 bkpn: RENOLD BLUE 140-1 No. 58 bkpn_clear: RENOLD BLUE1401No58 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 140A1S58I sr_ns: RENOLD140A1S58I
r: 03050344 p: 99.338 pid: 88277 b: RENOLD q: 0 st: lt: 15 ean: 0673766013302 sr: RENOLD 140A1S4I sr_no_br: 140A1S4I sr_no_br_cl: 140A1S4I sr_cl: RENOLD140A1S4I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 3/4 inch; 44,45 mm Diameter (pin) 12,71 mm Product line Renold Blue Number of the connecting link 4 Weight (kg/m) 7,8 kg/m Length (pin) 52,9 mm Thickness (outer plate) 5,61 mm Inside width 25,23 mm Thickness (inner plate) 5,61 mm Height 5,2 Type (ISO/ANSI) 140-1 Version (link) Simplex Breaking strength 170000 N Plate height 42,23 mm Diameter (roller) 25,4 mm n: RENOLD 140A1S4I blue 140-1 - simplex 1 3/4 inch - inner link cn: INNER LINK cn2: INNER LINK cn_clear: INNERLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: blue 140-1 - simplex 1 3/4 inch - inner link kpn: 140A1S4I kpn_dash: kpn_clear: 140A1S4I bkpn: RENOLD 140A1S4I bkpn_clear: RENOLD 140A1S4I c_path: Home / Drive technology / Chains and sprockets / Chains / Inner link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold inner link sr_no_br_cl_ns: 140A1S4I sr_ns: RENOLD140A1S4I
r: 03050017 p: 97.19 pid: 88604 b: RENOLD q: 0 st: lt: 15 ean: 0673766007424 sr: RENOLD 20B2S12I sr_no_br: 20B2S12I sr_no_br_cl: 20B2S12I sr_cl: RENOLD20B2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Thickness (inner plate) 4,62 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 7,8 kg/m Length (pin) 76,7 mm Height 2,7 Thickness (outer plate) 3,61 mm Plate height 26,42 mm Type (ISO/ANSI) 20B-2 Version (link) Duplex Diameter (pin) 10,19 mm Diameter (roller) 19,05 mm Breaking strength 170000 N Inside width 19,56 mm n: RENOLD 20B2S12I reducer BLUE 20b-2 - duplex 1 1/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 20b-2 - duplex 1 1/4 inch kpn: 20B2S12I kpn_dash: kpn_clear: 20B2S12I bkpn: RENOLD 20B2S12I bkpn_clear: RENOLD 20B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 20B2S12I sr_ns: RENOLD20B2S12I
r: 02097267 p: 96.363 pid: 87628 b: RENOLD q: 0 st: lt: 15 ean: 6623900524595 sr: RENOLD 100A3S11I sr_no_br: 100A3S11I sr_no_br_cl: 100A3S11I sr_cl: RENOLD100A3S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Length (pin) 111,2 mm Product line Renold Blue Weight (kg/m) 12,6 kg/m Thickness (outer plate) 4,06 mm Type (ISO/ANSI) 100-3 Height 4,2 Inside width 18,9 mm Breaking strength 261000 N Diameter (pin) 9,54 mm Thickness (inner plate) 4,06 mm Plate height 30,17 mm Number of the connecting link 11 Version (link) Triplex n: RENOLD BLUE 100-3 No. 11 closing link plywood 1 1/4" - 100A3S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 1 1/4" kpn: BLUE 100-3 No. 11 kpn_dash: BLUE 100 kpn_clear: BLUE1003No11 bkpn: RENOLD BLUE 100-3 No. 11 bkpn_clear: RENOLD BLUE1003No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 100A3S11I sr_ns: RENOLD100A3S11I
r: 03050025 p: 96.033 pid: 90006 b: RENOLD q: 6 st: 1 lt: 1 ean: 0673766009329 sr: RENOLD 16B3S12I sr_no_br: 16B3S12I sr_no_br_cl: 16B3S12I sr_cl: RENOLD16B3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Thickness (inner plate) 3,76 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 8,15 kg/m Length (pin) 98,6 mm Height 2,2 Thickness (outer plate) 3,1 mm Plate height 21,08 mm Type (ISO/ANSI) 16B-3 Version (link) Triplex Diameter (pin) 8,28 mm Diameter (roller) 15,88 mm Breaking strength 160000 N Inside width 17,02 mm n: RENOLD 16B3S12I reducer BLUE 16b-3 - plywood 1 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 16b-3 - plywood 1 inch kpn: 16B3S12I kpn_dash: kpn_clear: 16B3S12I bkpn: RENOLD 16B3S12I bkpn_clear: RENOLD 16B3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 16B3S12I sr_ns: RENOLD16B3S12I
r: 03050106 p: 96.033 pid: 87823 b: RENOLD q: 0 st: lt: 15 ean: 0673766021062 sr: RENOLD 16B3S30I sr_no_br: 16B3S30I sr_no_br_cl: 16B3S30I sr_cl: RENOLD16B3S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Thickness (inner plate) 3,76 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 8,15 kg/m Length (pin) 98,6 mm Height 2,2 Thickness (outer plate) 3,1 mm Plate height 21,08 mm Type (ISO/ANSI) 16B-3 Version (link) Triplex Diameter (pin) 8,28 mm Diameter (roller) 15,88 mm Breaking strength 160000 N Inside width 17,02 mm n: RENOLD 16B3S30I reducer BLUE 16b-3 - plywood 1 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 16b-3 - plywood 1 inch kpn: 16B3S30I kpn_dash: kpn_clear: 16B3S30I bkpn: RENOLD 16B3S30I bkpn_clear: RENOLD 16B3S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 16B3S30I sr_ns: RENOLD16B3S30I
r: 03030207 p: 94.38 pid: 89642 b: RENOLD q: 0 st: lt: 9 ean: 6623900916895 sr: RENOLD GY20B2S26I sr_no_br: GY20B2S26I sr_no_br_cl: GY20B2S26I sr_cl: RENOLDGY20B2S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Length (pin) 76,7 mm Product line Renold Synergy Weight (kg/m) 7,8 kg/m Thickness (outer plate) 3,61 mm Type (ISO/ANSI) 20B-2 Height 2,7 Inside width 19,56 mm Breaking strength 170000 N Diameter (pin) 10,19 mm Thickness (inner plate) 4,62 mm Plate height 26,42 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD SYNERGY 20B-2 S No. 26 connecting link duplex 1 1/4" - GY20B2S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: connecting link duplex 1 1/4" kpn: SYNERGY 20B-2 S No. 26 kpn_dash: SYNERGY 20B kpn_clear: SYNERGY20B2SNo26 bkpn: RENOLD SYNERGY 20B-2 S No. 26 bkpn_clear: RENOLD SYNERGY20B2SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY20B2S26I sr_ns: RENOLDGY20B2S26I
r: 03030242 p: 94.38 pid: 88434 b: RENOLD q: 0 st: lt: 15 ean: 6623901323968 sr: RENOLD GY20B2S107I sr_no_br: GY20B2S107I sr_no_br_cl: GY20B2S107I sr_cl: RENOLDGY20B2S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch Thickness (outer plate) 3,61 mm Weight (kg/m) 7,8 kg/m Height 2,7 Breaking strength 170000 N Transverse pitch 36,45 mm Length (pin) 76,7 mm Inside width 19,56 mm Diameter (pin) 10,19 mm Thickness (inner plate) 4,62 mm Plate height 26,42 mm Product line Renold Synergy Type (ISO/ANSI) 20B-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Synergy 20b-2 rivet duplex 1 1/4 inch - GY20B2S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: rivet duplex 1 1/4 inch kpn: Synergy 20b-2 kpn_dash: Synergy 20b kpn_clear: Synergy20b2 bkpn: RENOLD Synergy 20b-2 bkpn_clear: RENOLD Synergy20b2 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: GY20B2S107I sr_ns: RENOLDGY20B2S107I
r: 03050268 p: 94.173 pid: 90065 b: RENOLD q: 0 st: lt: 15 ean: 0673766004393 sr: RENOLD 32B1S4I sr_no_br: 32B1S4I sr_no_br_cl: 32B1S4I sr_cl: RENOLD32B1S4I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 inch; 50,8 mm Diameter (pin) 17,81 mm Product line Renold Blue Number of the connecting link 4 Weight (kg/m) 10,1 kg/m Length (pin) 63,4 mm Thickness (outer plate) 6,35 mm Inside width 30,99 mm Thickness (inner plate) 7,11 mm Height 8 Type (ISO/ANSI) 32B-1 Version (link) Simplex Breaking strength 250000 N Plate height 42,29 mm Diameter (roller) 29,21 mm n: RENOLD 32B1S4I blue 32b-1 - simplex 2 inch - inner link cn: INNER LINK cn2: INNER LINK cn_clear: INNERLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: blue 32b-1 - simplex 2 inch - inner link kpn: 32B1S4I kpn_dash: kpn_clear: 32B1S4I bkpn: RENOLD 32B1S4I bkpn_clear: RENOLD 32B1S4I c_path: Home / Drive technology / Chains and sprockets / Chains / Inner link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold inner link sr_no_br_cl_ns: 32B1S4I sr_ns: RENOLD32B1S4I
r: 03030309 p: 94.173 pid: 89655 b: RENOLD q: 0 st: lt: 15 ean: 0673766004355 sr: RENOLD 32B1S107I sr_no_br: 32B1S107I sr_no_br_cl: 32B1S107I sr_cl: RENOLD32B1S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 inch Thickness (outer plate) 6,35 mm Weight (kg/m) 10,1 kg/m Height 8 Breaking strength 250000 N Length (pin) 63,4 mm Inside width 30,99 mm Diameter (pin) 17,81 mm Thickness (inner plate) 7,11 mm Plate height 42,29 mm Product line Renold Blue Type (ISO/ANSI) 32B-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Blue 32b-1 latch link simplex 2 inch - 32B1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: latch link simplex 2 inch kpn: Blue 32b-1 kpn_dash: Blue 32b kpn_clear: Blue32b1 bkpn: RENOLD Blue 32b-1 bkpn_clear: RENOLD Blue32b1 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 32B1S107I sr_ns: RENOLD32B1S107I
r: 02274321 p: 92.52 pid: 88181 b: RENOLD q: 0 st: lt: 15 ean: 6623901323883 sr: RENOLD GY20B1S12I sr_no_br: GY20B1S12I sr_no_br_cl: GY20B1S12I sr_cl: RENOLDGY20B1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Thickness (inner plate) 3,61 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 3,85 kg/m Length (pin) 39,8 mm Height 2,7 Thickness (outer plate) 3,61 mm Plate height 26,42 mm Type (ISO/ANSI) 20B-1 Version (link) Simplex Diameter (pin) 10,19 mm Diameter (roller) 19,05 mm Breaking strength 95000 N Inside width 19,56 mm n: RENOLD GY20B1S12I reducer SYNERGY 20b-1 - simplex 1 1/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 20b-1 - simplex 1 1/4 inch kpn: GY20B1S12I kpn_dash: kpn_clear: GY20B1S12I bkpn: RENOLD GY20B1S12I bkpn_clear: RENOLD GY20B1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY20B1S12I sr_ns: RENOLDGY20B1S12I
r: 03030048 p: 91.689 pid: 88378 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A3S26I sr_no_br: 80A3S26I sr_no_br_cl: 80A3S26I sr_cl: RENOLD80A3S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 91,2 mm Product line Renold Blue Weight (kg/m) 8,3 kg/m Thickness (outer plate) 3,25 mm Type (ISO/ANSI) 80-3 Height 3 Inside width 15,75 mm Breaking strength 166800 N Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Number of the connecting link 26 Version (link) Triplex n: RENOLD BLUE 80-3 No. 26 closing link plywood 1" - 80A3S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 1" kpn: BLUE 80-3 No. 26 kpn_dash: BLUE 80 kpn_clear: BLUE803No26 bkpn: RENOLD BLUE 80-3 No. 26 bkpn_clear: RENOLD BLUE803No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 80A3S26I sr_ns: RENOLD80A3S26I
r: 02097264 p: 91.689 pid: 88017 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A3S11I sr_no_br: 80A3S11I sr_no_br_cl: 80A3S11I sr_cl: RENOLD80A3S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 91,2 mm Product line Renold Blue Weight (kg/m) 8,3 kg/m Thickness (outer plate) 3,25 mm Type (ISO/ANSI) 80-3 Height 3 Inside width 15,75 mm Breaking strength 166800 N Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Number of the connecting link 11 Version (link) Triplex n: RENOLD BLUE 80-3 No. 11 closing link plywood 1" - 80A3S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 1" kpn: BLUE 80-3 No. 11 kpn_dash: BLUE 80 kpn_clear: BLUE803No11 bkpn: RENOLD BLUE 80-3 No. 11 bkpn_clear: RENOLD BLUE803No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 80A3S11I sr_ns: RENOLD80A3S11I
r: 03050181 p: 90.06 pid: 87835 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD GY10B3S30I sr_no_br: GY10B3S30I sr_no_br_cl: GY10B3S30I sr_cl: RENOLDGY10B3S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 1,55 mm Product line Renold Synergy Number of the connecting link 30 Weight (kg/m) 2,54 kg/m Length (pin) 52 mm Height 2,5 Thickness (outer plate) 1,55 mm Plate height 14,6 mm Type (ISO/ANSI) 10B-3 Version (link) Triplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 66700 N Inside width 9,65 mm n: RENOLD GY10B3S30I reducer SYNERGY 10b-3 - plywood 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 10b-3 - plywood 5/8 inch kpn: GY10B3S30I kpn_dash: kpn_clear: GY10B3S30I bkpn: RENOLD GY10B3S30I bkpn_clear: RENOLD GY10B3S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY10B3S30I sr_ns: RENOLDGY10B3S30I
r: 03030241 p: 89.763 pid: 88087 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD GY16B2S107I sr_no_br: GY16B2S107I sr_no_br_cl: GY16B2S107I sr_cl: RENOLDGY16B2S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch Thickness (outer plate) 3,1 mm Weight (kg/m) 5,5 kg/m Height 2,2 Breaking strength 106000 N Transverse pitch 31,88 mm Length (pin) 66,8 mm Inside width 17,02 mm Diameter (pin) 8,28 mm Thickness (inner plate) 4,12 mm Plate height 21,08 mm Product line Renold Synergy Type (ISO/ANSI) 16B-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Synergy 16b-2 rivet duplex 1 inch - GY16B2S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: rivet duplex 1 inch kpn: Synergy 16b-2 kpn_dash: Synergy 16b kpn_clear: Synergy16b2 bkpn: RENOLD Synergy 16b-2 bkpn_clear: RENOLD Synergy16b2 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: GY16B2S107I sr_ns: RENOLDGY16B2S107I
r: 03030582 p: 89.763 pid: 88563 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 16B2SNS26I sr_no_br: 16B2SNS26I sr_no_br_cl: 16B2SNS26I sr_cl: RENOLD16B2SNS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 66,8 mm Product line Renold Syno Weight (kg/m) 5,4 kg/m Thickness (outer plate) 3,06 mm Type (ISO/ANSI) 16B-2 Height 3 Inside width 17,02 mm Breaking strength 106000 N Diameter (pin) 8,27 mm Thickness (inner plate) 3,76 mm Plate height 20,2 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD SYNO 16B-2 SN No. 26 connecting link duplex 1" - 16B2SNS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: connecting link duplex 1" kpn: SYNO 16B-2 SN No. 26 kpn_dash: SYNO 16B kpn_clear: SYNO16B2SNNo26 bkpn: RENOLD SYNO 16B-2 SN No. 26 bkpn_clear: RENOLD SYNO16B2SNNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 16B2SNS26I sr_ns: RENOLD16B2SNS26I
r: 03030098 p: 86.28 pid: 88385 b: RENOLD q: 5 st: 1 lt: 1 ean: 6623900916819 sr: RENOLD GY16B3S26I sr_no_br: GY16B3S26I sr_no_br_cl: GY16B3S26I sr_cl: RENOLDGY16B3S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 98,6 mm Product line Renold Synergy Weight (kg/m) 8,15 kg/m Thickness (outer plate) 3,1 mm Type (ISO/ANSI) 16B-3 Height 2,2 Inside width 17,02 mm Breaking strength 160000 N Diameter (pin) 8,28 mm Thickness (inner plate) 4,12 mm Plate height 21,08 mm Number of the connecting link 26 Version (link) Triplex n: RENOLD SYNERGY 16B-3 S No. 26 closing link plywood 1" - GY16B3S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: closing link plywood 1" kpn: SYNERGY 16B-3 S No. 26 kpn_dash: SYNERGY 16B kpn_clear: SYNERGY16B3SNo26 bkpn: RENOLD SYNERGY 16B-3 S No. 26 bkpn_clear: RENOLD SYNERGY16B3SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY16B3S26I sr_ns: RENOLDGY16B3S26I
r: 03050216 p: 82.814 pid: 88253 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD GY60A2S12I sr_no_br: GY60A2S12I sr_no_br_cl: GY60A2S12I sr_cl: RENOLDGY60A2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Thickness (inner plate) 2,45 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 1,47 kg/m Length (pin) 48,1 mm Height 2,6 Thickness (outer plate) 2,45 mm Plate height 17,5 mm Type (ISO/ANSI) 60-2 Version (link) Duplex Diameter (pin) 5,94 mm Diameter (roller) 11,91 mm Breaking strength 31300 N Inside width 12,57 mm n: RENOLD GY60A2S12I reducer SYNERGY 60-2 - duplex 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 60-2 - duplex 3/4 inch kpn: GY60A2S12I kpn_dash: kpn_clear: GY60A2S12I bkpn: RENOLD GY60A2S12I bkpn_clear: RENOLD GY60A2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY60A2S12I sr_ns: RENOLDGY60A2S12I
r: 03050225 p: 79.504 pid: 87866 b: RENOLD q: 0 st: lt: 15 ean: 0673766031566 sr: RENOLD GY60A3S12I sr_no_br: GY60A3S12I sr_no_br_cl: GY60A3S12I sr_cl: RENOLDGY60A3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Thickness (inner plate) 2,45 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 4,38 kg/m Length (pin) 70,9 mm Height 2,6 Thickness (outer plate) 2,45 mm Plate height 17,5 mm Type (ISO/ANSI) 60A-3 Version (link) Triplex Diameter (pin) 5,94 mm Diameter (roller) 11,91 mm Breaking strength 93900 N Inside width 12,57 mm n: RENOLD GY60A3S12I reducer SYNERGY 60a-3 - plywood 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 60a-3 - plywood 3/4 inch kpn: GY60A3S12I kpn_dash: kpn_clear: GY60A3S12I bkpn: RENOLD GY60A3S12I bkpn_clear: RENOLD GY60A3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY60A3S12I sr_ns: RENOLDGY60A3S12I
r: 03030324 p: 76.489 pid: 88484 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A2S107I sr_no_br: 80A2S107I sr_no_br_cl: 80A2S107I sr_cl: RENOLD80A2S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch Thickness (outer plate) 3,25 mm Weight (kg/m) 5,5 kg/m Height 3 Breaking strength 111200 N Transverse pitch 29,29 mm Length (pin) 61,9 mm Inside width 15,75 mm Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Product line Renold Blue Type (ISO/ANSI) 80-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Blue 80-2 rivet duplex 1 inch - 80A2S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet duplex 1 inch kpn: Blue 80-2 kpn_dash: Blue 80 kpn_clear: Blue802 bkpn: RENOLD Blue 80-2 bkpn_clear: RENOLD Blue802 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 80A2S107I sr_ns: RENOLD80A2S107I
