r: 03050243 p: 18.512 pid: 88663 b: RENOLD q: 0 st: lt: 15 ean: 0673766031283 sr: RENOLD GY35A1S30I sr_no_br: GY35A1S30I sr_no_br_cl: GY35A1S30I sr_cl: RENOLDGY35A1S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Synergy Number of the connecting link 30 Weight (kg/m) 0,35 kg/m Length (pin) 12 mm Height 1,7 Thickness (outer plate) 1,29 mm Plate height 8,6 mm Type (ISO/ANSI) 35-1 Version (link) Simplex Diameter (pin) 3,59 mm Diameter (roller) 5,08 mm Breaking strength 7900 N Inside width 4,68 mm n: RENOLD GY35A1S30I reducer SYNERGY 35-1 - simplex 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 35-1 - simplex 3/8 inch kpn: GY35A1S30I kpn_dash: kpn_clear: GY35A1S30I bkpn: RENOLD GY35A1S30I bkpn_clear: RENOLD GY35A1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY35A1S30I sr_ns: RENOLDGY35A1S30I
r: 03050073 p: 18.512 pid: 88618 b: RENOLD q: 20 st: 1 lt: 1 ean: 6623900916208 sr: RENOLD GY12B1S30I sr_no_br: GY12B1S30I sr_no_br_cl: GY12B1S30I sr_cl: RENOLDGY12B1S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Thickness (inner plate) 1,81 mm Product line Renold Synergy Number of the connecting link 30 Weight (kg/m) 1,22 kg/m Length (pin) 21,9 mm Height 2,6 Thickness (outer plate) 1,81 mm Plate height 16 mm Type (ISO/ANSI) 12B-1 Version (link) Simplex Diameter (pin) 5,72 mm Diameter (roller) 12,07 mm Breaking strength 28900 N Inside width 11,68 mm n: RENOLD GY12B1S30I reducer SYNERGY 12b-1 - simplex 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 12b-1 - simplex 3/4 inch kpn: GY12B1S30I kpn_dash: kpn_clear: GY12B1S30I bkpn: RENOLD GY12B1S30I bkpn_clear: RENOLD GY12B1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY12B1S30I sr_ns: RENOLDGY12B1S30I
r: 03030143 p: 18.512 pid: 89614 b: RENOLD q: 0 st: lt: 8 ean: 0673766038244 sr: RENOLD 16B1SSS26I sr_no_br: 16B1SSS26I sr_no_br_cl: 16B1SSS26I sr_cl: RENOLD16B1SSS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 34,9 mm Product line Renold Stainless Steel Weight (kg/m) 2,7 kg/m Thickness (outer plate) 3 mm Type (ISO/ANSI) 16B-1 Height 2,2 Inside width 17,02 mm Breaking strength 43160 N Diameter (pin) 8,28 mm Thickness (inner plate) 3,7 mm Plate height 20,2 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD stainless steel 16B-1 No. 26 closing link simplex 1" - 16B1SSS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: closing link simplex 1" kpn: stainless steel 16B-1 No. 26 kpn_dash: stainless steel 16B kpn_clear: stainlesssteel16B1No26 bkpn: RENOLD stainless steel 16B-1 No. 26 bkpn_clear: RENOLD stainlesssteel16B1No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 16B1SSS26I sr_ns: RENOLD16B1SSS26I
r: 03030429 p: 18.347 pid: 89680 b: RENOLD q: 0 st: lt: 15 ean: 6623901330959 sr: RENOLD 10B2SSS107I sr_no_br: 10B2SSS107I sr_no_br_cl: 10B2SSS107I sr_cl: RENOLD10B2SSS107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch Thickness (outer plate) 1,55 mm Weight (kg/m) 1,69 kg/m Height 2,5 Breaking strength 29400 N Transverse pitch 16,59 mm Length (pin) 35,4 mm Inside width 9,65 mm Diameter (pin) 5,08 mm Thickness (inner plate) 1,55 mm Plate height 14,6 mm Product line Renold Stainless Steel Type (ISO/ANSI) 10B-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Stainless Steel 10b-2 rivet link duplex 5/8 inch - 10B2SSS107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: rivet link duplex 5/8 inch kpn: Stainless Steel 10b-2 kpn_dash: Stainless Steel 10b kpn_clear: StainlessSteel10b2 bkpn: RENOLD Stainless Steel 10b-2 bkpn_clear: RENOLD StainlessSteel10b2 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 10B2SSS107I sr_ns: RENOLD10B2SSS107I
r: 03050116 p: 17.736 pid: 89824 b: RENOLD q: 14 st: 1 lt: 1 ean: sr: RENOLD 50A1S30I sr_no_br: 50A1S30I sr_no_br_cl: 50A1S30I sr_cl: RENOLD50A1S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 2,04 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 1 kg/m Length (pin) 20,4 mm Height 2,7 Thickness (outer plate) 2,04 mm Plate height 14,6 mm Type (ISO/ANSI) 50-1 Version (link) Simplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 21800 N Inside width 9,4 mm n: RENOLD 50A1S30I reducing link BLUE 50-1 - simplex 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 50-1 - simplex 5/8 inch kpn: 50A1S30I kpn_dash: kpn_clear: 50A1S30I bkpn: RENOLD 50A1S30I bkpn_clear: RENOLD 50A1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 50A1S30I sr_ns: RENOLD50A1S30I
r: 03030584 p: 17.721 pid: 88143 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 40A1SNS26I sr_no_br: 40A1SNS26I sr_no_br_cl: 40A1SNS26I sr_cl: RENOLD40A1SNS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 16,9 mm Product line Renold Syno Weight (kg/m) 0,67 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 40-1 Height 2 Inside width 7,85 mm Breaking strength 13900 N Diameter (pin) 3,97 mm Thickness (inner plate) 1,76 mm Plate height 11,7 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD SYNO 40-1 SN No. 26 closing link simplex 1/2" - 40A1SNS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: closing link simplex 1/2" kpn: SYNO 40-1 SN No. 26 kpn_dash: SYNO 40 kpn_clear: SYNO401SNNo26 bkpn: RENOLD SYNO 40-1 SN No. 26 bkpn_clear: RENOLD SYNO401SNNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 40A1SNS26I sr_ns: RENOLD40A1SNS26I
r: 03050014 p: 17.52 pid: 89753 b: RENOLD q: 2 st: 1 lt: 1 ean: 0673766034840 sr: RENOLD 10B2S12I sr_no_br: 10B2S12I sr_no_br_cl: 10B2S12I sr_cl: RENOLD10B2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 1,55 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 1,69 kg/m Length (pin) 35,4 mm Height 2,5 Thickness (outer plate) 1,55 mm Plate height 14,6 mm Type (ISO/ANSI) 10B-2 Version (link) Duplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 44500 N Inside width 9,65 mm n: RENOLD 10B2S12I reducing link BLUE 10b-2 - duplex 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 10b-2 - duplex 5/8 inch kpn: 10B2S12I kpn_dash: kpn_clear: 10B2S12I bkpn: RENOLD 10B2S12I bkpn_clear: RENOLD 10B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 10B2S12I sr_ns: RENOLD10B2S12I
r: 03050099 p: 17.52 pid: 88629 b: RENOLD q: 0 st: lt: 8 ean: 0673766006854 sr: RENOLD 10B2S30I sr_no_br: 10B2S30I sr_no_br_cl: 10B2S30I sr_cl: RENOLD10B2S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 1,55 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 1,69 kg/m Length (pin) 35,4 mm Height 2,5 Thickness (outer plate) 1,55 mm Plate height 14,6 mm Type (ISO/ANSI) 10B-2 Version (link) Duplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 44500 N Inside width 9,65 mm n: RENOLD 10B2S30I reducing link BLUE 10b-2 - duplex 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 10b-2 - duplex 5/8 inch kpn: 10B2S30I kpn_dash: kpn_clear: 10B2S30I bkpn: RENOLD 10B2S30I bkpn_clear: RENOLD 10B2S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 10B2S30I sr_ns: RENOLD10B2S30I
r: 03030211 p: 17.314 pid: 89647 b: RENOLD q: 0 st: lt: 15 ean: 0673766007943 sr: RENOLD GY40A2S26I sr_no_br: GY40A2S26I sr_no_br_cl: GY40A2S26I sr_cl: RENOLDGY40A2S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 30,8 mm Product line Renold Synergy Weight (kg/m) 0,6 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 40-2 Height 2,1 Inside width 7,85 mm Breaking strength 13900 N Diameter (pin) 3,97 mm Thickness (inner plate) 1,55 mm Plate height 11,2 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD SYNERGY 40-2 S No. 26 connecting link duplex 1/2" - GY40A2S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: connecting link duplex 1/2" kpn: SYNERGY 40-2 S No. 26 kpn_dash: SYNERGY 40 kpn_clear: SYNERGY402SNo26 bkpn: RENOLD SYNERGY 40-2 S No. 26 bkpn_clear: RENOLD SYNERGY402SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY40A2S26I sr_ns: RENOLDGY40A2S26I
r: 03030032 p: 16.859 pid: 89569 b: RENOLD q: 0 st: lt: 15 ean: 6623900539742 sr: RENOLD 80A1S26I sr_no_br: 80A1S26I sr_no_br_cl: 80A1S26I sr_cl: RENOLD80A1S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 32,7 mm Product line Renold Blue Weight (kg/m) 2,8 kg/m Thickness (outer plate) 3,25 mm Type (ISO/ANSI) 80-1 Height 3 Inside width 15,75 mm Breaking strength 55600 N Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD BLUE 80-1 No. 26 closing link simplex 1" - 80A1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 1" kpn: BLUE 80-1 No. 26 kpn_dash: BLUE 80 kpn_clear: BLUE801No26 bkpn: RENOLD BLUE 80-1 No. 26 bkpn_clear: RENOLD BLUE801No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 80A1S26I sr_ns: RENOLD80A1S26I
r: 03050115 p: 16.818 pid: 87826 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 40A1S30I sr_no_br: 40A1S30I sr_no_br_cl: 40A1S30I sr_cl: RENOLD40A1S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,55 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,6 kg/m Length (pin) 16,4 mm Height 2,1 Thickness (outer plate) 1,55 mm Plate height 11,2 mm Type (ISO/ANSI) 40-1 Version (link) Simplex Diameter (pin) 3,97 mm Diameter (roller) 7,92 mm Breaking strength 13900 N Inside width 7,85 mm n: RENOLD 40A1S30I reducing link BLUE 40-1 - simplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 40-1 - simplex 1/2 inch kpn: 40A1S30I kpn_dash: kpn_clear: 40A1S30I bkpn: RENOLD 40A1S30I bkpn_clear: RENOLD 40A1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 40A1S30I sr_ns: RENOLD40A1S30I
r: 03050013 p: 16.487 pid: 87800 b: RENOLD q: 19 st: 1 lt: 1 ean: 0673766034826 sr: RENOLD 08B2S12I sr_no_br: 08B2S12I sr_no_br_cl: 08B2S12I sr_cl: RENOLD08B2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,55 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 1,38 kg/m Length (pin) 30,4 mm Height 2 Thickness (outer plate) 1,55 mm Plate height 11,7 mm Type (ISO/ANSI) 08B-2 Version (link) Duplex Diameter (pin) 4,45 mm Diameter (roller) 8,51 mm Breaking strength 31100 N Inside width 7,75 mm n: RENOLD 08B2S12I reducer BLUE 08b-2 - duplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 08b-2 - duplex 1/2 inch kpn: 08B2S12I kpn_dash: kpn_clear: 08B2S12I bkpn: RENOLD 08B2S12I bkpn_clear: RENOLD 08B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 08B2S12I sr_ns: RENOLD08B2S12I
r: 02096815 p: 16.363 pid: 89714 b: RENOLD q: 0 st: lt: 15 ean: 0673766042371 sr: RENOLD 25A1S30I sr_no_br: 25A1S30I sr_no_br_cl: 25A1S30I sr_cl: RENOLD25A1S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/4 inch; 6,35 mm Thickness (inner plate) 0,76 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,12 kg/m Length (pin) 7,9 mm Height 1,2 Thickness (outer plate) 0,76 mm Plate height 5,9 mm Type (ISO/ANSI) 25-1 Version (link) Simplex Diameter (pin) 2,3 mm Diameter (roller) 3,3 mm Breaking strength 3500 N Inside width 3,1 mm n: RENOLD 25A1S30I reduction gear unit BLUE 25-1 - simplex 1/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reduction gear unit BLUE 25-1 - simplex 1/4 inch kpn: 25A1S30I kpn_dash: kpn_clear: 25A1S30I bkpn: RENOLD 25A1S30I bkpn_clear: RENOLD 25A1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 25A1S30I sr_ns: RENOLD25A1S30I
r: 02097169 p: 16.284 pid: 87602 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 50A2S107I sr_no_br: 50A2S107I sr_no_br_cl: 50A2S107I sr_cl: RENOLD50A2S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch Thickness (outer plate) 2,04 mm Weight (kg/m) 1,98 kg/m Height 2,7 Breaking strength 43600 N Transverse pitch 18,11 mm Length (pin) 38,4 mm Inside width 9,4 mm Diameter (pin) 5,08 mm Thickness (inner plate) 2,04 mm Plate height 14,6 mm Product line Renold Blue Type (ISO/ANSI) 50-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Blue 50-2 rivet link duplex 5/8 inch - 50A2S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet link duplex 5/8 inch kpn: Blue 50-2 kpn_dash: Blue 50 kpn_clear: Blue502 bkpn: RENOLD Blue 50-2 bkpn_clear: RENOLD Blue502 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 50A2S107I sr_ns: RENOLD50A2S107I
r: 02097170 p: 16.284 pid: 87606 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 50A2S11I sr_no_br: 50A2S11I sr_no_br_cl: 50A2S11I sr_cl: RENOLD50A2S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Length (pin) 38,4 mm Product line Renold Blue Weight (kg/m) 1,98 kg/m Thickness (outer plate) 2,04 mm Type (ISO/ANSI) 50-2 Height 2,7 Inside width 9,4 mm Breaking strength 43600 N Diameter (pin) 5,08 mm Thickness (inner plate) 2,04 mm Plate height 14,6 mm Number of the connecting link 11 Version (link) Duplex n: RENOLD BLUE 50-2 No. 11 connecting link duplex 5/8" - 50A2S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 5/8" kpn: BLUE 50-2 No. 11 kpn_dash: BLUE 50 kpn_clear: BLUE502No11 bkpn: RENOLD BLUE 50-2 No. 11 bkpn_clear: RENOLD BLUE502No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 50A2S11I sr_ns: RENOLD50A2S11I
r: 03030145 p: 16.198 pid: 89603 b: RENOLD q: 0 st: lt: 15 ean: 0673766015108 sr: RENOLD 08B2SSS26I sr_no_br: 08B2SSS26I sr_no_br_cl: 08B2SSS26I sr_cl: RENOLD08B2SSS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 30,4 mm Product line Renold Stainless Steel Weight (kg/m) 1,38 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 08B-2 Height 2 Inside width 7,75 mm Breaking strength 23540 N Diameter (pin) 4,45 mm Thickness (inner plate) 1,55 mm Plate height 11,7 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD stainless steel 08B-2 No. 26 connecting link duplex 1/2" - 08B2SSS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: connecting link duplex 1/2" kpn: stainless steel 08B-2 No. 26 kpn_dash: stainless steel 08B kpn_clear: stainlesssteel08B2No26 bkpn: RENOLD stainless steel 08B-2 No. 26 bkpn_clear: RENOLD stainlesssteel08B2No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 08B2SSS26I sr_ns: RENOLD08B2SSS26I
r: 03050012 p: 15.867 pid: 89797 b: RENOLD q: 17 st: 1 lt: 1 ean: 0673766034802 sr: RENOLD 06B2S12I sr_no_br: 06B2S12I sr_no_br_cl: 06B2S12I sr_cl: RENOLD06B2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 0,78 kg/m Length (pin) 23 mm Height 1,3 Thickness (outer plate) 1,04 mm Plate height 8,2 mm Type (ISO/ANSI) 06B-2 Version (link) Duplex Diameter (pin) 3,28 mm Diameter (roller) 6,35 mm Breaking strength 16900 N Inside width 5,72 mm n: RENOLD 06B2S12I reducer BLUE 06b-2 - duplex 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 06b-2 - duplex 3/8 inch kpn: 06B2S12I kpn_dash: kpn_clear: 06B2S12I bkpn: RENOLD 06B2S12I bkpn_clear: RENOLD 06B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 06B2S12I sr_ns: RENOLD06B2S12I
r: 03050074 p: 15.867 pid: 88199 b: RENOLD q: 4 st: 1 lt: 1 ean: 0673766006441 sr: RENOLD 06B2S30I sr_no_br: 06B2S30I sr_no_br_cl: 06B2S30I sr_cl: RENOLD06B2S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,78 kg/m Length (pin) 23 mm Height 1,3 Thickness (outer plate) 1,04 mm Plate height 8,2 mm Type (ISO/ANSI) 06B-2 Version (link) Duplex Diameter (pin) 3,28 mm Diameter (roller) 6,35 mm Breaking strength 16900 N Inside width 5,72 mm n: RENOLD 06B2S30I reducer BLUE 06b-2 - duplex 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 06b-2 - duplex 3/8 inch kpn: 06B2S30I kpn_dash: kpn_clear: 06B2S30I bkpn: RENOLD 06B2S30I bkpn_clear: RENOLD 06B2S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 06B2S30I sr_ns: RENOLD06B2S30I
r: 03050071 p: 15.661 pid: 87812 b: RENOLD q: 13 st: 1 lt: 1 ean: 0673766001668 sr: RENOLD GY08B1S30I sr_no_br: GY08B1S30I sr_no_br_cl: GY08B1S30I sr_cl: RENOLDGY08B1S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,55 mm Product line Renold Synergy Number of the connecting link 30 Weight (kg/m) 0,7 kg/m Length (pin) 16,5 mm Height 2 Thickness (outer plate) 1,55 mm Plate height 11,7 mm Type (ISO/ANSI) 08B-1 Version (link) Simplex Diameter (pin) 4,45 mm Diameter (roller) 8,51 mm Breaking strength 17800 N Inside width 7,75 mm n: RENOLD GY08B1S30I reducer SYNERGY 08b-1 - simplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 08b-1 - simplex 1/2 inch kpn: GY08B1S30I kpn_dash: kpn_clear: GY08B1S30I bkpn: RENOLD GY08B1S30I bkpn_clear: RENOLD GY08B1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY08B1S30I sr_ns: RENOLDGY08B1S30I
r: 03030366 p: 15.455 pid: 88545 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 35A2S26I sr_no_br: 35A2S26I sr_no_br_cl: 35A2S26I sr_cl: RENOLD35A2S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Length (pin) 22,2 mm Product line Renold Blue Weight (kg/m) 0,62 kg/m Thickness (outer plate) 1,29 mm Type (ISO/ANSI) 35-2 Height 1,7 Inside width 4,68 mm Breaking strength 15800 N Diameter (pin) 3,59 mm Thickness (inner plate) 1,29 mm Plate height 8,6 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD BLUE 35-2 No. 26 master link duplex 3/8" - 35A2S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: master link duplex 3/8" kpn: BLUE 35-2 No. 26 kpn_dash: BLUE 35 kpn_clear: BLUE352No26 bkpn: RENOLD BLUE 35-2 No. 26 bkpn_clear: RENOLD BLUE352No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 35A2S26I sr_ns: RENOLD35A2S26I
