r: 03030047 p: 29.472 pid: 88050 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 60A3S26I sr_no_br: 60A3S26I sr_no_br_cl: 60A3S26I sr_cl: RENOLD60A3S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 70,9 mm Product line Renold Blue Weight (kg/m) 4,38 kg/m Thickness (outer plate) 2,45 mm Type (ISO/ANSI) 60-3 Height 2,6 Inside width 12,57 mm Breaking strength 93900 N Diameter (pin) 5,94 mm Thickness (inner plate) 2,45 mm Plate height 17,5 mm Number of the connecting link 26 Version (link) Triplex n: RENOLD BLUE 60-3 No. 26 closing link plywood 3/4" - 60A3S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 3/4" kpn: BLUE 60-3 No. 26 kpn_dash: BLUE 60 kpn_clear: BLUE603No26 bkpn: RENOLD BLUE 60-3 No. 26 bkpn_clear: RENOLD BLUE603No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 60A3S26I sr_ns: RENOLD60A3S26I
r: 02097255 p: 29.472 pid: 89561 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 60A3S107I sr_no_br: 60A3S107I sr_no_br_cl: 60A3S107I sr_cl: RENOLD60A3S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch Thickness (outer plate) 2,45 mm Weight (kg/m) 4,38 kg/m Height 2,6 Breaking strength 93900 N Transverse pitch 22,78 mm Length (pin) 70,9 mm Inside width 12,57 mm Diameter (pin) 5,94 mm Thickness (inner plate) 2,45 mm Plate height 17,5 mm Product line Renold Blue Type (ISO/ANSI) 60-3 Number of the connecting link 107 Version (link) Triplex n: RENOLD Blue 60-3 rivet plywood 3/4 inch - 60A3S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet plywood 3/4 inch kpn: Blue 60-3 kpn_dash: Blue 60 kpn_clear: Blue603 bkpn: RENOLD Blue 60-3 bkpn_clear: RENOLD Blue603 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 60A3S107I sr_ns: RENOLD60A3S107I
r: 02097256 p: 29.472 pid: 89539 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 60A3S11I sr_no_br: 60A3S11I sr_no_br_cl: 60A3S11I sr_cl: RENOLD60A3S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 70,9 mm Product line Renold Blue Weight (kg/m) 4,38 kg/m Thickness (outer plate) 2,45 mm Type (ISO/ANSI) 60-3 Height 2,6 Inside width 12,57 mm Breaking strength 93900 N Diameter (pin) 5,94 mm Thickness (inner plate) 2,45 mm Plate height 17,5 mm Number of the connecting link 11 Version (link) Triplex n: RENOLD BLUE 60-3 No. 11 closing link plywood 3/4" - 60A3S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link plywood 3/4" kpn: BLUE 60-3 No. 11 kpn_dash: BLUE 60 kpn_clear: BLUE603No11 bkpn: RENOLD BLUE 60-3 No. 11 bkpn_clear: RENOLD BLUE603No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 60A3S11I sr_ns: RENOLD60A3S11I
r: 02274421 p: 29.442 pid: 89551 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 40A2SSS26I sr_no_br: 40A2SSS26I sr_no_br_cl: 40A2SSS26I sr_cl: RENOLD40A2SSS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 30,8 mm Product line Renold Stainless Steel Weight (kg/m) 1,2 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 40-2 Height 2,1 Inside width 7,85 mm Breaking strength 21380 N Diameter (pin) 3,97 mm Thickness (inner plate) 1,55 mm Plate height 11,2 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD stainless steel 40-2 No. 26 connecting link duplex 1/2" - 40A2SSS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: connecting link duplex 1/2" kpn: stainless steel 40-2 No. 26 kpn_dash: stainless steel 40 kpn_clear: stainlesssteel402No26 bkpn: RENOLD stainless steel 40-2 No. 26 bkpn_clear: RENOLD stainlesssteel402No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 40A2SSS26I sr_ns: RENOLD40A2SSS26I
r: 02096867 p: 29.09 pid: 88318 b: RENOLD q: 0 st: lt: 15 ean: 0673766013043 sr: RENOLD 100A1S107I sr_no_br: 100A1S107I sr_no_br_cl: 100A1S107I sr_cl: RENOLD100A1S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch Thickness (outer plate) 4,06 mm Weight (kg/m) 4,2 kg/m Height 4,2 Breaking strength 87000 N Length (pin) 39,7 mm Inside width 18,9 mm Diameter (pin) 9,54 mm Thickness (inner plate) 4,06 mm Plate height 30,17 mm Product line Renold Blue Type (ISO/ANSI) 100-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Blue 100-1 latch link simplex 1 1/4 inch - 100A1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: latch link simplex 1 1/4 inch kpn: Blue 100-1 kpn_dash: Blue 100 kpn_clear: Blue1001 bkpn: RENOLD Blue 100-1 bkpn_clear: RENOLD Blue1001 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 100A1S107I sr_ns: RENOLD100A1S107I
r: 03050342 p: 29.09 pid: 87914 b: RENOLD q: 0 st: lt: 15 ean: 0673766040865 sr: RENOLD 100A1S4I sr_no_br: 100A1S4I sr_no_br_cl: 100A1S4I sr_cl: RENOLD100A1S4I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Diameter (pin) 9,54 mm Product line Renold Blue Number of the connecting link 4 Weight (kg/m) 4,2 kg/m Length (pin) 39,7 mm Thickness (outer plate) 4,06 mm Inside width 18,9 mm Thickness (inner plate) 4,06 mm Height 4,2 Type (ISO/ANSI) 100-1 Version (link) Simplex Breaking strength 87000 N Plate height 30,17 mm Diameter (roller) 19,05 mm n: RENOLD 100A1S4I blue 100-1 - simplex 1 1/4 inch - inner link cn: INNER LINK cn2: INNER LINK cn_clear: INNERLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: blue 100-1 - simplex 1 1/4 inch - inner link kpn: 100A1S4I kpn_dash: kpn_clear: 100A1S4I bkpn: RENOLD 100A1S4I bkpn_clear: RENOLD 100A1S4I c_path: Home / Drive technology / Chains and sprockets / Chains / Inner link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold inner link sr_no_br_cl_ns: 100A1S4I sr_ns: RENOLD100A1S4I
r: 03030033 p: 29.09 pid: 89571 b: RENOLD q: 0 st: lt: 15 ean: 0673766013098 sr: RENOLD 100A1S58I sr_no_br: 100A1S58I sr_no_br_cl: 100A1S58I sr_cl: RENOLD100A1S58I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Length (pin) 39,7 mm Product line Renold Blue Weight (kg/m) 4,2 kg/m Thickness (outer plate) 4,06 mm Type (ISO/ANSI) 100-1 Height 4,2 Inside width 18,9 mm Breaking strength 87000 N Diameter (pin) 9,54 mm Thickness (inner plate) 4,06 mm Plate height 30,17 mm Number of the connecting link 58 Version (link) Simplex n: RENOLD BLUE 100-1 No. 58 closing link simplex 1 1/4" - 100A1S58I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 1 1/4" kpn: BLUE 100-1 No. 58 kpn_dash: BLUE 100 kpn_clear: BLUE1001No58 bkpn: RENOLD BLUE 100-1 No. 58 bkpn_clear: RENOLD BLUE1001No58 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 100A1S58I sr_ns: RENOLD100A1S58I
r: 02096868 p: 29.09 pid: 88003 b: RENOLD q: 0 st: lt: 15 ean: 6623900525073 sr: RENOLD 100A1S11I sr_no_br: 100A1S11I sr_no_br_cl: 100A1S11I sr_cl: RENOLD100A1S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Length (pin) 39,7 mm Product line Renold Blue Weight (kg/m) 4,2 kg/m Thickness (outer plate) 4,06 mm Type (ISO/ANSI) 100-1 Height 4,2 Inside width 18,9 mm Breaking strength 87000 N Diameter (pin) 9,54 mm Thickness (inner plate) 4,06 mm Plate height 30,17 mm Number of the connecting link 11 Version (link) Simplex n: RENOLD BLUE 100-1 No. 11 closing link simplex 1 1/4" - 100A1S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 1 1/4" kpn: BLUE 100-1 No. 11 kpn_dash: BLUE 100 kpn_clear: BLUE1001No11 bkpn: RENOLD BLUE 100-1 No. 11 bkpn_clear: RENOLD BLUE1001No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 100A1S11I sr_ns: RENOLD100A1S11I
r: 03030240 p: 28.849 pid: 89673 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD GY12B2S107I sr_no_br: GY12B2S107I sr_no_br_cl: GY12B2S107I sr_cl: RENOLDGY12B2S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch Thickness (outer plate) 1,81 mm Weight (kg/m) 2,42 kg/m Height 2,6 Breaking strength 57800 N Transverse pitch 19,46 mm Length (pin) 41,4 mm Inside width 11,68 mm Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Product line Renold Synergy Type (ISO/ANSI) 12B-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Synergy 12b-2 rivet link duplex 3/4 inch - GY12B2S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: rivet link duplex 3/4 inch kpn: Synergy 12b-2 kpn_dash: Synergy 12b kpn_clear: Synergy12b2 bkpn: RENOLD Synergy 12b-2 bkpn_clear: RENOLD Synergy12b2 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: GY12B2S107I sr_ns: RENOLDGY12B2S107I
r: 03030581 p: 28.849 pid: 89751 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 12B2SNS26I sr_no_br: 12B2SNS26I sr_no_br_cl: 12B2SNS26I sr_cl: RENOLD12B2SNS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 43,1 mm Product line Renold Syno Weight (kg/m) 2,47 kg/m Thickness (outer plate) 1,81 mm Type (ISO/ANSI) 12B-2 Height 2,5 Inside width 11,68 mm Breaking strength 57800 N Diameter (pin) 5,72 mm Thickness (inner plate) 2,42 mm Plate height 16 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD SYNO 12B-2 SN No. 26 connecting link duplex 3/4" - 12B2SNS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: connecting link duplex 3/4" kpn: SYNO 12B-2 SN No. 26 kpn_dash: SYNO 12B kpn_clear: SYNO12B2SNNo26 bkpn: RENOLD SYNO 12B-2 SN No. 26 bkpn_clear: RENOLD SYNO12B2SNNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 12B2SNS26I sr_ns: RENOLD12B2SNS26I
r: 03030126 p: 27.782 pid: 88403 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A1S58I sr_no_br: 80A1S58I sr_no_br_cl: 80A1S58I sr_cl: RENOLD80A1S58I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 32,7 mm Product line Renold Blue Weight (kg/m) 2,8 kg/m Thickness (outer plate) 3,25 mm Type (ISO/ANSI) 80-1 Height 3 Inside width 15,75 mm Breaking strength 55600 N Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Number of the connecting link 58 Version (link) Simplex n: RENOLD BLUE 80-1 No. 58 closing link simplex 1" - 80A1S58I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 1" kpn: BLUE 80-1 No. 58 kpn_dash: BLUE 80 kpn_clear: BLUE801No58 bkpn: RENOLD BLUE 80-1 No. 58 bkpn_clear: RENOLD BLUE801No58 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 80A1S58I sr_ns: RENOLD80A1S58I
r: 02096862 p: 27.782 pid: 89555 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A1S11I sr_no_br: 80A1S11I sr_no_br_cl: 80A1S11I sr_cl: RENOLD80A1S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 32,7 mm Product line Renold Blue Weight (kg/m) 2,8 kg/m Thickness (outer plate) 3,25 mm Type (ISO/ANSI) 80-1 Height 3 Inside width 15,75 mm Breaking strength 55600 N Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Number of the connecting link 11 Version (link) Simplex n: RENOLD BLUE 80-1 No. 11 closing link simplex 1" - 80A1S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 1" kpn: BLUE 80-1 No. 11 kpn_dash: BLUE 80 kpn_clear: BLUE801No11 bkpn: RENOLD BLUE 80-1 No. 11 bkpn_clear: RENOLD BLUE801No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 80A1S11I sr_ns: RENOLD80A1S11I
r: 03050341 p: 27.782 pid: 88676 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A1S4I sr_no_br: 80A1S4I sr_no_br_cl: 80A1S4I sr_cl: RENOLD80A1S4I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Diameter (pin) 7,94 mm Product line Renold Blue Number of the connecting link 4 Weight (kg/m) 2,8 kg/m Length (pin) 32,7 mm Thickness (outer plate) 3,25 mm Inside width 15,75 mm Thickness (inner plate) 3,25 mm Height 3 Type (ISO/ANSI) 80-1 Version (link) Simplex Breaking strength 55600 N Plate height 24,13 mm Diameter (roller) 15,88 mm n: RENOLD 80A1S4I blue 80-1 - simplex 1 inch - inner link cn: INNER LINK cn2: INNER LINK cn_clear: INNERLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: blue 80-1 - simplex 1 inch - inner link kpn: 80A1S4I kpn_dash: kpn_clear: 80A1S4I bkpn: RENOLD 80A1S4I bkpn_clear: RENOLD 80A1S4I c_path: Home / Drive technology / Chains and sprockets / Chains / Inner link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold inner link sr_no_br_cl_ns: 80A1S4I sr_ns: RENOLD80A1S4I
r: 03030320 p: 27.782 pid: 89711 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A1S107I sr_no_br: 80A1S107I sr_no_br_cl: 80A1S107I sr_cl: RENOLD80A1S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch Thickness (outer plate) 3,25 mm Weight (kg/m) 2,8 kg/m Height 3 Breaking strength 55600 N Length (pin) 32,7 mm Inside width 15,75 mm Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Product line Renold Blue Type (ISO/ANSI) 80-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Blue 80-1 rivet link simplex 1 inch - 80A1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet link simplex 1 inch kpn: Blue 80-1 kpn_dash: Blue 80 kpn_clear: Blue801 bkpn: RENOLD Blue 80-1 bkpn_clear: RENOLD Blue801 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 80A1S107I sr_ns: RENOLD80A1S107I
r: 03030249 p: 27.603 pid: 87723 b: RENOLD q: 0 st: lt: 15 ean: 0673766009183 sr: RENOLD GY12B3S107I sr_no_br: GY12B3S107I sr_no_br_cl: GY12B3S107I sr_cl: RENOLDGY12B3S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch Thickness (outer plate) 1,81 mm Weight (kg/m) 3,59 kg/m Height 2,6 Breaking strength 86700 N Transverse pitch 19,46 mm Length (pin) 60,9 mm Inside width 11,68 mm Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Product line Renold Synergy Type (ISO/ANSI) 12B-3 Number of the connecting link 107 Version (link) Triplex n: RENOLD Synergy 12b-3 rivet plywood 3/4 inch - GY12B3S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: rivet plywood 3/4 inch kpn: Synergy 12b-3 kpn_dash: Synergy 12b kpn_clear: Synergy12b3 bkpn: RENOLD Synergy 12b-3 bkpn_clear: RENOLD Synergy12b3 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: GY12B3S107I sr_ns: RENOLDGY12B3S107I
r: 03030097 p: 27.603 pid: 89589 b: RENOLD q: 5 st: 1 lt: 1 ean: 0673766009220 sr: RENOLD GY12B3S26I sr_no_br: GY12B3S26I sr_no_br_cl: GY12B3S26I sr_cl: RENOLDGY12B3S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 60,9 mm Product line Renold Synergy Weight (kg/m) 3,59 kg/m Thickness (outer plate) 1,81 mm Type (ISO/ANSI) 12B-3 Height 2,6 Inside width 11,68 mm Breaking strength 86700 N Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Number of the connecting link 26 Version (link) Triplex n: RENOLD SYNERGY 12B-3 S No. 26 closing link plywood 3/4" - GY12B3S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: closing link plywood 3/4" kpn: SYNERGY 12B-3 S No. 26 kpn_dash: SYNERGY 12B kpn_clear: SYNERGY12B3SNo26 bkpn: RENOLD SYNERGY 12B-3 S No. 26 bkpn_clear: RENOLD SYNERGY12B3SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY12B3S26I sr_ns: RENOLDGY12B3S26I
r: 03050104 p: 27.438 pid: 90031 b: RENOLD q: 8 st: 1 lt: 1 ean: 0673766009145 sr: RENOLD 10B3S30I sr_no_br: 10B3S30I sr_no_br_cl: 10B3S30I sr_cl: RENOLD10B3S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 1,55 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 2,54 kg/m Length (pin) 52 mm Height 2,5 Thickness (outer plate) 1,55 mm Plate height 14,6 mm Type (ISO/ANSI) 10B-3 Version (link) Triplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 66700 N Inside width 9,65 mm n: RENOLD 10B3S30I reducer BLUE 10b-3 - plywood 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 10b-3 - plywood 5/8 inch kpn: 10B3S30I kpn_dash: kpn_clear: 10B3S30I bkpn: RENOLD 10B3S30I bkpn_clear: RENOLD 10B3S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 10B3S30I sr_ns: RENOLD10B3S30I
r: 03030214 p: 27.438 pid: 89611 b: RENOLD q: 0 st: lt: 15 ean: 0673766009985 sr: RENOLD GY50A3S26I sr_no_br: GY50A3S26I sr_no_br_cl: GY50A3S26I sr_cl: RENOLDGY50A3S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Length (pin) 56,5 mm Product line Renold Synergy Weight (kg/m) 2,96 kg/m Thickness (outer plate) 2,04 mm Type (ISO/ANSI) 50A-3 Height 2,7 Inside width 9,4 mm Breaking strength 65400 N Diameter (pin) 5,08 mm Thickness (inner plate) 2,04 mm Plate height 14,6 mm Number of the connecting link 26 Version (link) Triplex n: RENOLD SYNERGY 50-3 S No. 26 closing link plywood 5/8" - GY50A3S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: closing link plywood 5/8" kpn: SYNERGY 50-3 S No. 26 kpn_dash: SYNERGY 50 kpn_clear: SYNERGY503SNo26 bkpn: RENOLD SYNERGY 50-3 S No. 26 bkpn_clear: RENOLD SYNERGY503SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY50A3S26I sr_ns: RENOLDGY50A3S26I
r: 03030310 p: 27.438 pid: 89659 b: RENOLD q: 0 st: lt: 15 ean: 0673766007158 sr: RENOLD 16B2S107I sr_no_br: 16B2S107I sr_no_br_cl: 16B2S107I sr_cl: RENOLD16B2S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch Thickness (outer plate) 3,1 mm Weight (kg/m) 5,5 kg/m Height 2,2 Breaking strength 106000 N Transverse pitch 31,88 mm Length (pin) 66,8 mm Inside width 17,02 mm Diameter (pin) 8,28 mm Thickness (inner plate) 3,76 mm Plate height 21,08 mm Product line Renold Blue Type (ISO/ANSI) 16B-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Blue 16b-2 rivet duplex 1 inch - 16B2S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet duplex 1 inch kpn: Blue 16b-2 kpn_dash: Blue 16b kpn_clear: Blue16b2 bkpn: RENOLD Blue 16b-2 bkpn_clear: RENOLD Blue16b2 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 16B2S107I sr_ns: RENOLD16B2S107I
r: 03030014 p: 27.438 pid: 87649 b: RENOLD q: 9 st: 1 lt: 1 ean: 0673766007240 sr: RENOLD 16B2S26I sr_no_br: 16B2S26I sr_no_br_cl: 16B2S26I sr_cl: RENOLD16B2S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 66,8 mm Product line Renold Blue Weight (kg/m) 5,5 kg/m Thickness (outer plate) 3,1 mm Type (ISO/ANSI) 16B-2 Height 2,2 Inside width 17,02 mm Breaking strength 106000 N Diameter (pin) 8,28 mm Thickness (inner plate) 3,76 mm Plate height 21,08 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD BLUE 16B-2 No. 26 connecting link duplex 1" - 16B2S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 1" kpn: BLUE 16B-2 No. 26 kpn_dash: BLUE 16B kpn_clear: BLUE16B2No26 bkpn: RENOLD BLUE 16B-2 No. 26 bkpn_clear: RENOLD BLUE16B2No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 16B2S26I sr_ns: RENOLD16B2S26I
