Product description
The REMA Gripper is a highly robust steel wire hoist that can be used vertically, horizontally and diagonally, with capacities of 800 kg, 1,600 kg and 3,200 kg. The shear pin and lever serve as reliable indicators in the event of overload.
Features
- Precise operation.
- Virtually maintenance-free.
- The housing is made of cast aluminium with a low dead weight.
- The safety pin breaks at approximately 25 per cent overload.
- The lever deflects at approximately 50% overload.
- The safety pin(s) can be replaced whilst under load.
- Spare safety pins are located in the carrying handle or in the operating handle (GP-0.8).
Option
- Steel cable set, standard length is 20 metres.
Marking
- In accordance with standard
Standard
- EN 12100, EN 13157, EN 13414-1, EN 12385-3
Note
- Before use, check that the safety pin is in good condition. If the safety pin is broken, replace it. Before use, check that the steel cable is not damaged. Before use, check that the steel cable is correctly fed through both clamping jaws. Never use a longer lever or make the lever longer than the original one.