r: 02097239 p: 45.667 pid: 89736 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 35A3S12I sr_no_br: 35A3S12I sr_no_br_cl: 35A3S12I sr_cl: RENOLD35A3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 0,93 kg/m Length (pin) 32,2 mm Height 1,7 Thickness (outer plate) 1,29 mm Plate height 8,6 mm Type (ISO/ANSI) 35-3 Version (link) Triplex Diameter (pin) 3,59 mm Diameter (roller) 5,08 mm Breaking strength 23700 N Inside width 4,68 mm n: RENOLD 35A3S12I reducer BLUE 35-3 - plywood 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 35-3 - plywood 3/8 inch kpn: 35A3S12I kpn_dash: kpn_clear: 35A3S12I bkpn: RENOLD 35A3S12I bkpn_clear: RENOLD 35A3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 35A3S12I sr_ns: RENOLD35A3S12I
r: 03050139 p: 45.302 pid: 89828 b: RENOLD q: 0 st: lt: 15 ean: 0673766015153 sr: RENOLD 10B2SSS12I sr_no_br: 10B2SSS12I sr_no_br_cl: 10B2SSS12I sr_cl: RENOLD10B2SSS12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 1,55 mm Product line Renold Stainless Steel Number of the connecting link 12 Weight (kg/m) 1,69 kg/m Length (pin) 35,4 mm Height 2,5 Thickness (outer plate) 1,55 mm Plate height 14,6 mm Type (ISO/ANSI) 10B-2 Version (link) Duplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 29400 N Inside width 9,65 mm n: RENOLD 10B2SSS12I reduction link stainless steel 10b-2 - duplex 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: reduction link stainless steel 10b-2 - duplex 5/8 inch kpn: 10B2SSS12I kpn_dash: kpn_clear: 10B2SSS12I bkpn: RENOLD 10B2SSS12I bkpn_clear: RENOLD 10B2SSS12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 10B2SSS12I sr_ns: RENOLD10B2SSS12I
r: 03050039 p: 38.93 pid: 88614 b: RENOLD q: 0 st: lt: 8 ean: sr: RENOLD 60A2S12I sr_no_br: 60A2S12I sr_no_br_cl: 60A2S12I sr_cl: RENOLD60A2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Pitch 3/4 inch; 19,05 mm Height 2,6 Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 2,91 kg/m Length (pin) 48,1 mm Thickness (outer plate) 2,45 mm Thickness (inner plate) 2,45 mm Plate height 17,5 mm Type (ISO/ANSI) 60-2 Version (link) Duplex Diameter (pin) 5,94 mm Diameter (roller) 11,91 mm Breaking strength 62600 N Inside width 12,57 mm n: RENOLD 60A2S12I reducing link BLUE 60-2 - duplex 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 60-2 - duplex 3/4 inch kpn: 60A2S12I kpn_dash: kpn_clear: 60A2S12I bkpn: RENOLD 60A2S12I bkpn_clear: RENOLD 60A2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 60A2S12I sr_ns: RENOLD60A2S12I
r: 03050138 p: 36.753 pid: 90039 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 08B2SSS12I sr_no_br: 08B2SSS12I sr_no_br_cl: 08B2SSS12I sr_cl: RENOLD08B2SSS12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,55 mm Product line Renold Stainless Steel Number of the connecting link 12 Weight (kg/m) 1,38 kg/m Length (pin) 30,4 mm Height 2 Thickness (outer plate) 1,55 mm Plate height 11,7 mm Type (ISO/ANSI) 08B-2 Version (link) Duplex Diameter (pin) 4,45 mm Diameter (roller) 8,51 mm Breaking strength 23540 N Inside width 7,75 mm n: RENOLD 08B2SSS12I reduction link stainless steel 08b-2 - duplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: reduction link stainless steel 08b-2 - duplex 1/2 inch kpn: 08B2SSS12I kpn_dash: kpn_clear: 08B2SSS12I bkpn: RENOLD 08B2SSS12I bkpn_clear: RENOLD 08B2SSS12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 08B2SSS12I sr_ns: RENOLD08B2SSS12I
r: 03050373 p: 36.28 pid: 90083 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 50A1SSS12I sr_no_br: 50A1SSS12I sr_no_br_cl: 50A1SSS12I sr_cl: RENOLD50A1SSS12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 2,04 mm Product line Renold Stainless Steel Number of the connecting link 12 Weight (kg/m) 1 kg/m Length (pin) 20,4 mm Height 2,7 Thickness (outer plate) 2,04 mm Plate height 14,6 mm Type (ISO/ANSI) 50-1 Version (link) Simplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 16810 N Inside width 9,4 mm n: RENOLD 50A1SSS12I reduction link stainless steel 50-1 - simplex 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: reduction link stainless steel 50-1 - simplex 5/8 inch kpn: 50A1SSS12I kpn_dash: kpn_clear: 50A1SSS12I bkpn: RENOLD 50A1SSS12I bkpn_clear: RENOLD 50A1SSS12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 50A1SSS12I sr_ns: RENOLD50A1SSS12I
r: 03050385 p: 30.94 pid: 90091 b: A&S q: 0 st: lt: 15 ean: sr: A&S AR12H1S12 sr_no_br: AR12H1S12 sr_no_br_cl: AR12H1S12 sr_cl: ASAR12H1S12 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Pitch 3/4 inch Version (link) Simplex Type (ISO/ANSI) 12H-1 Number of the connecting link 12 Product line Renold A&S n: A&S AR12H1S12 reducer 12h-1 - simplex cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: The Renold A&S roller chain has long been known for its high quality, affordability, reliability and performance. The chain has gained a strong reputation for its excellent wear resistance, high fatigue resistance and durability. These factors have contributed to Renold A&S becoming the most widely used chain brand in Europe. The Renold A&S chain is available with European (BS) and ANSI specifications and with a full range of standard M, K and extended bearing pin attachments. The chain can even be supplied with a lubricant based on the customer's specific requirements. Available in sizes with pitch ranging from 4 mm to 2.5 inches Solid extruded bushing Solid extruded roller Plates with wider blades Hardened and glass bead blasted blades Comprehensive European (BS) and ANSI range Wide range of fasteners available Lubricant of choice to meet customer requirements ds: dsc: kts: reducer 12h-1 - simplex kpn: AR12H1S12 kpn_dash: kpn_clear: AR12H1S12 bkpn: A&S AR12H1S12 bkpn_clear: A&S AR12H1S12 c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / A&s / A&s drive technology / A&s chains and sprockets / A&s chains / A&s reducing link sr_no_br_cl_ns: AR12H1S12 sr_ns: A&SAR12H1S12
r: 02274774 p: 29.46 pid: 87794 b: RENOLD q: 0 st: lt: 17 ean: 0673766042340 sr: RENOLD 12B1SNS12I sr_no_br: 12B1SNS12I sr_no_br_cl: 12B1SNS12I sr_cl: RENOLD12B1SNS12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Pitch 3/4 inch; 19,05 mm Thickness (inner plate) 2,42 mm Product line Renold Syno Number of the connecting link 12 Weight (kg/m) 1,3 kg/m Length (pin) 23,6 mm Height 2,5 Thickness (outer plate) 1,81 mm Plate height 16 mm Type (ISO/ANSI) 12B-1 Version (link) Simplex Diameter (pin) 5,72 mm Diameter (roller) 12,07 mm Breaking strength 28900 N Inside width 11,68 mm n: RENOLD 12B1SNS12I reduction gear unit SYNO 12b-1 - simplex 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: reduction gear unit SYNO 12b-1 - simplex 3/4 inch kpn: 12B1SNS12I kpn_dash: kpn_clear: 12B1SNS12I bkpn: RENOLD 12B1SNS12I bkpn_clear: RENOLD 12B1SNS12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 12B1SNS12I sr_ns: RENOLD12B1SNS12I
r: 03050135 p: 25.729 pid: 88229 b: RENOLD q: 0 st: lt: 15 ean: 0673766015443 sr: RENOLD 12B1SSS12I sr_no_br: 12B1SSS12I sr_no_br_cl: 12B1SSS12I sr_cl: RENOLD12B1SSS12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Pitch 3/4 inch; 19,05 mm Thickness (inner plate) 1,81 mm Product line Renold Stainless Steel Number of the connecting link 12 Weight (kg/m) 1,22 kg/m Length (pin) 21,9 mm Height 2,6 Thickness (outer plate) 1,81 mm Plate height 16 mm Type (ISO/ANSI) 12B-1 Version (link) Simplex Diameter (pin) 5,72 mm Diameter (roller) 12,07 mm Breaking strength 18640 N Inside width 11,68 mm n: RENOLD 12B1SSS12I reduction link stainless steel 12b-1 - simplex 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: reduction link stainless steel 12b-1 - simplex 3/4 inch kpn: 12B1SSS12I kpn_dash: kpn_clear: 12B1SSS12I bkpn: RENOLD 12B1SSS12I bkpn_clear: RENOLD 12B1SSS12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 12B1SSS12I sr_ns: RENOLD12B1SSS12I
r: 02274773 p: 24.917 pid: 88587 b: RENOLD q: 0 st: lt: 15 ean: 6623900927235 sr: RENOLD 10B1SNS12I sr_no_br: 10B1SNS12I sr_no_br_cl: 10B1SNS12I sr_cl: RENOLD10B1SNS12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 2,04 mm Product line Renold Syno Number of the connecting link 12 Weight (kg/m) 1,01 kg/m Length (pin) 19,6 mm Height 1,4 Thickness (outer plate) 1,55 mm Plate height 14,6 mm Type (ISO/ANSI) 10B-1 Version (link) Simplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 22200 N Inside width 9,65 mm n: RENOLD 10B1SNS12I reducer SYNO 10b-1 - simplex 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: reducer SYNO 10b-1 - simplex 5/8 inch kpn: 10B1SNS12I kpn_dash: kpn_clear: 10B1SNS12I bkpn: RENOLD 10B1SNS12I bkpn_clear: RENOLD 10B1SNS12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 10B1SNS12I sr_ns: RENOLD10B1SNS12I
r: 03050089 p: 23.334 pid: 89820 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 05B2S30 sr_no_br: 05B2S30 sr_no_br_cl: 05B2S30 sr_cl: RENOLD05B2S30 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Pitch 8 mm Thickness (inner plate) 0,76 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,36 kg/m Length (pin) 14,3 mm Height 1,5 Thickness (outer plate) 0,76 mm Plate height 7,11 mm Type (ISO/ANSI) 05B-2 Version (link) Duplex Diameter (pin) 2,31 mm Diameter (roller) 5 mm Breaking strength 7800 N Inside width 3 mm n: RENOLD 05B2S30 reducer BLUE 05b-2 - duplex 5/16 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 05b-2 - duplex 5/16 inch kpn: 05B2S30 kpn_dash: kpn_clear: 05B2S30 bkpn: RENOLD 05B2S30 bkpn_clear: RENOLD 05B2S30 c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 05B2S30 sr_ns: RENOLD05B2S30
r: 03050372 p: 23.118 pid: 89850 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 40A1SSS12I sr_no_br: 40A1SSS12I sr_no_br_cl: 40A1SSS12I sr_cl: RENOLD40A1SSS12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,55 mm Product line Renold Stainless Steel Number of the connecting link 12 Weight (kg/m) 0,6 kg/m Length (pin) 16,4 mm Height 2,1 Thickness (outer plate) 1,55 mm Plate height 11,2 mm Type (ISO/ANSI) 40-1 Version (link) Simplex Diameter (pin) 3,97 mm Diameter (roller) 7,92 mm Breaking strength 10690 N Inside width 7,85 mm n: RENOLD 40A1SSS12I reduction link stainless steel 40-1 - simplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: reduction link stainless steel 40-1 - simplex 1/2 inch kpn: 40A1SSS12I kpn_dash: kpn_clear: 40A1SSS12I bkpn: RENOLD 40A1SSS12I bkpn_clear: RENOLD 40A1SSS12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 40A1SSS12I sr_ns: RENOLD40A1SSS12I
r: 03050134 p: 21.576 pid: 88226 b: RENOLD q: 0 st: lt: 7 ean: 0673766041787 sr: RENOLD 10B1SSS12I sr_no_br: 10B1SSS12I sr_no_br_cl: 10B1SSS12I sr_cl: RENOLD10B1SSS12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 1,55 mm Product line Renold Stainless Steel Number of the connecting link 12 Weight (kg/m) 0,96 kg/m Length (pin) 18,8 mm Height 2,5 Thickness (outer plate) 1,55 mm Plate height 14,6 mm Type (ISO/ANSI) 10B-1 Version (link) Simplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 14700 N Inside width 9,65 mm n: RENOLD 10B1SSS12I reduction link stainless steel 10b-1 - simplex 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: reduction link stainless steel 10b-1 - simplex 5/8 inch kpn: 10B1SSS12I kpn_dash: kpn_clear: 10B1SSS12I bkpn: RENOLD 10B1SSS12I bkpn_clear: RENOLD 10B1SSS12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 10B1SSS12I sr_ns: RENOLD10B1SSS12I
r: 02096828 p: 13.852 pid: 89718 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 35A1S30I sr_no_br: 35A1S30I sr_no_br_cl: 35A1S30I sr_cl: RENOLD35A1S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,35 kg/m Length (pin) 12 mm Height 1,7 Thickness (outer plate) 1,29 mm Plate height 8,6 mm Type (ISO/ANSI) 35-1 Version (link) Simplex Diameter (pin) 3,59 mm Diameter (roller) 5,08 mm Breaking strength 7900 N Inside width 4,68 mm n: RENOLD 35A1S30I reducing link BLUE 35-1 - simplex 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 35-1 - simplex 3/8 inch kpn: 35A1S30I kpn_dash: kpn_clear: 35A1S30I bkpn: RENOLD 35A1S30I bkpn_clear: RENOLD 35A1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 35A1S30I sr_ns: RENOLD35A1S30I
r: 03050130 p: 12.174 pid: 90035 b: RENOLD q: 0 st: lt: 12 ean: 6623900805595 sr: RENOLD 06B1SSS12I sr_no_br: 06B1SSS12I sr_no_br_cl: 06B1SSS12I sr_cl: RENOLD06B1SSS12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Stainless Steel Number of the connecting link 12 Weight (kg/m) 0,39 kg/m Length (pin) 12,5 mm Height 1,3 Thickness (outer plate) 1,04 mm Plate height 8,2 mm Type (ISO/ANSI) 06B-1 Version (link) Simplex Diameter (pin) 3,28 mm Diameter (roller) 6,35 mm Breaking strength 6850 N Inside width 5,72 mm n: RENOLD 06B1SSS12I reduction link stainless steel 06b-1 - simplex 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: reduction link stainless steel 06b-1 - simplex 3/8 inch kpn: 06B1SSS12I kpn_dash: kpn_clear: 06B1SSS12I bkpn: RENOLD 06B1SSS12I bkpn_clear: RENOLD 06B1SSS12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 06B1SSS12I sr_ns: RENOLD06B1SSS12I
