r: 01900009 p: 949.917 pid: 78879 b: SKF q: 0 st: lt: 8 ean: 7316572464748 sr: SKF TMMA 120 sr_no_br: TMMA 120 sr_no_br_cl: TMMA120 sr_cl: SKFTMMA120 sr_dash: sold: 949.917 p_range: none type: standard act: 1 avo: 1 av: Max. width 250 mm Hydraulical No Number of hooks 3 Max. height 250 mm n: SKF TMMA 120 EasyPull mechanical puller 75-250mm 250mm 120kN cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The SKF EasyPull TMMA 120 is one of the most user-friendly and safest bearing dismounting tools on the market. It is very robust and ergonomically designed and features spring-operated arms that enable the user to position the puller behind the component with just one movement. The TMMA 120 is mechanically operated and capable of withdrawal forces up to 120 kN for components with a maximum outer diameter of 250 mm (9.8 in). Unique red rings spring-operated opening mechanism allow the TMMA 120 to be placed behind the component with just one movement Self-centring capability and nosepiece help to avoid damage to shaft Self-locking arms help to prevent puller slipping under load Sturdy design allows safe dismounting of components in the tightest applications Hydraulic force generators TMHS 100 available as an accessory ds: dsc: Scope of delivery 1x Puller TMMA 120 with mechanical spindle 1x Tube of spindle grease LGEV2/0.035 1x Printed instructions for use kts: EasyPull mechanical puller 75-250mm 250mm 120kN kpn: TMMA 120 kpn_dash: kpn_clear: TMMA120 bkpn: SKF TMMA 120 bkpn_clear: SKF TMMA120 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Skf / Skf tools / Skf hand tools / Skf pullers / Skf pullers / Skf puller sr_no_br_cl_ns: TMMA120 sr_ns: SKFTMMA120
r: 41230033 p: 41.157 pid: 37514 b: KUKKO q: 2 st: 1 lt: 1 ean: 4021176015298 sr: KUKKO 42-1 sr_no_br: 42-1 sr_no_br_cl: 421 sr_cl: KUKKO421 sr_dash: KUKKO 42 sold: 946.611 p_range: none type: standard act: 1 avo: 1 av: Max. width 65 mm Puller type Universel puller Hydraulical No Number of hooks 3 Max. height 65 mm n: KUKKO 42-1 three-arm trigger 65mm cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The 3-arm universal puller with swivel pull hooks is used for pulling bearings, gears and discs in all common sizes for Craft, workshop and Industry. It can loosen any part that is on a shaft and freely accessible from outside. The swivelling draw hooks ensure maximum freedom of movement even in restricted environmental conditions for individual adjustment to the respective clamping range and clamping depth. The 3-arm design guarantees even load distribution and thus a particularly secure hold on the part being pulled. Within the 42 series, there are various versions of the tractor. Up to model 41-2, the tractor is equipped with a T-handle and a flat pressure piece for working in very tight spaces. From model 42-3 onwards, the tractor features a drive socket and a double spindle tip. This achieves the highest tractive forces (3 to 7 t). Application For pulling bearings, gears and discs in all common sizes for Crafts, Workshop and Industry. ds: dsc: Scope of delivery 42-1-65-S:Pivoting drawbar hooks (set) 42-1-T:Bridge for 3-arm universal jointed hitch set 42-1, 42-2 609087:Spindle Ø 9 mm for spindle Thread M 9x1.25, 87 mm length, 3.75 mm Screw thread kts: three-arm trigger 65mm kpn: 42-1 kpn_dash: 42 kpn_clear: 421 bkpn: KUKKO 42-1 bkpn_clear: KUKKO 421 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 421 sr_ns: KUKKO42-1
r: 41961583 p: 62.768 pid: 63030 b: GEDORE q: 0 st: lt: 3 ean: 4036976104172 sr: GEDORE 8000310 sr_no_br: 8000310 sr_no_br_cl: 8000310 sr_cl: GEDORE8000310 sr_dash: sold: 941.52 p_range: none type: standard act: 1 avo: 1 av: Max. width 130 mm Number of hooks 2 Max. height 100 mm Hydraulical No Puller type Universel puller n: GEDORE 1.06/1A universal puller 2-armed 130x100 mm - 8000310 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Tried-and-tested model for safely and quickly loosening discs, wheels, ball bearings, etc. Robust, die-forged design If required, the spindle can be replaced by a hydraulic spindle (see table) Adjustment scale for even setting of the hooks Enables centric, force-optimised retraction even with very high retraction forces Exchangeable hooks for different spindle depths are available as accessories Suitable for use with a hydraulic spindle (see table) ds: dsc: kts: universal puller 2-armed 130x100 mm kpn: 1.06/1A kpn_dash: kpn_clear: 1061A bkpn: GEDORE 1.06/1A bkpn_clear: GEDORE 1061A c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore pullers / Gedore pullers / Gedore puller sr_no_br_cl_ns: 8000310 sr_ns: GEDORE8000310
r: 41230087 p: 133.842 pid: 37856 b: KUKKO q: 2 st: 1 lt: 1 ean: 4021176006616 sr: KUKKO 12-1 sr_no_br: 12-1 sr_no_br_cl: 121 sr_cl: KUKKO121 sr_dash: KUKKO 12 sold: 936.894 p_range: none type: standard act: 1 avo: 1 av: Max. width 100 mm Hydraulical No Number of hooks 3 Max. height 100 mm n: KUKKO 12-1 external trigger with three arms preset 100x100mm cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The 3-arm puller "Alligator" with fixed pulling hooks and anti-slip device is used for pulling particularly stuck bearings, gears and discs in all common sizes for craft, workshop and industry. With it, any part that sits on a shaft and is freely accessible from outside can be loosened. Tightening the spanner automatically tightens the tow hooks centrally and firmly. This prevents the tow hooks from slipping or moving. Application For pulling particularly stuck bearings, gears and discs in all common sizes for Craft, workshop and Industry. ds: dsc: Scope of delivery 12-1-100-S:Tow hooks (set) for Alligator 12-1-206:Traverseninnenbuchsen with spindle for 3-arm puller "Alligator" with pre-adjustable tow hooks 12-1 12-1-8:Key for "Alligator" 12-1 12-1-T:Bridge for 3-arm pullers with presettable drawbar hooks 12-1 612140:Double-sided spindle tip for mechanical pressure spindles M12 - M14 614135:Spindle Ø 14 mm for spindle Thread M 14x1.5, 135 mm length, 4.5 mm Screw thread kts: external trigger with three arms preset 100x100mm kpn: 12-1 kpn_dash: 12 kpn_clear: 121 bkpn: KUKKO 12-1 bkpn_clear: KUKKO 121 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 121 sr_ns: KUKKO12-1
r: 02063273 p: 224.752 pid: 37771 b: KUKKO q: 0 st: lt: 4 ean: 4021176645013 sr: KUKKO 20-20+ sr_no_br: 20-20+ sr_no_br_cl: 2020 sr_cl: KUKKO2020 sr_dash: KUKKO 20 sold: 899.008 p_range: none type: standard act: 1 avo: 1 av: Max. width 200 mm Puller type Universel puller Hydraulical No Number of hooks 2 Max. height 150 mm n: KUKKO 20-20+ tractor with two arms 200x150mm cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Based on the ingenuity and pioneering spirit of Alfred Kleinbongartz, the universal tractors with sliding, always parallel drawbars of the 20+ series get a functional upgrade. Operating comfort and user-friendliness take centre stage. Specifically, the following optimisations have been implemented: For even more flexibility when pulling, the tractor range has been extended by two sizes (20-0+ and 20-00+). This creates a clamping range of 0 to 350 mm and a maximum tractive force of 2.5 to 8.5 tonnes for external pullers. To increase the load capacity, the tractors are equipped with reinforced shoulders, creating a stable H-profile. This is thanks to the newly thought-out, innovative construction of the Bridge, which guarantees maximum stability even at high traction forces. Above the Bridge, as an orientation aid, there is a scale for even shifting of the towing hooks, enabling safe adjustment of the hooks. Below the Bridge is another six-digit number in addition to the part number of the Bridge for reorders. The first three digits indicate which spindle is compatible with the Bridge. The last three digits (xxx) indicate the variable spindle length, which varies between 85 mm and 600 mm depending on the version. In addition to mechanical spindles with a different thread length, grease hydraulic spindles can also be used - depending on the size of the tractor - as part of a Hydraulic Upgrade for light and controlled pulling of particularly stuck parts. An additional Advantage are the two eyes on the side of the Bridge for attaching a Safety Spring (Series 660), which additionally secures the tractor and ensures safe fixation during work or storage. The 2-arm universal pullers with quickly adjustable and robust Standard puller hooks are used for particularly safe pulling of bearings, gears and discs in all common sizes for craft, workshop and industry. With these, any part that is on a shaft and freely accessible from outside can be loosened. By simply reversing the tow hooks, the pullers can also be used as internal pullers. Application For pulling bearings, gears and discs in all common sizes for Crafts, Workshop and Industry. ds: dsc: Scope of delivery 2-152-P:Quick-adjustable standard hitch (pair, tension depth 150 mm) 20-20-T:Bridge for 2-arm universal puller 20-20 620260:Double-sided spindle tip for mechanical pressure spindles M20, G1/2", G5/8", G3/4" 621220:Spindle Ø 20.955 mm for spindle Thread G 1/2" / 14, 220 mm length, 5.4 mm Screw thread kts: tractor with two arms 200x150mm kpn: 20-20+ kpn_dash: 20 kpn_clear: 2020 bkpn: KUKKO 20-20+ bkpn_clear: KUKKO 2020 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 2020 sr_ns: KUKKO20-20+
r: 41964445 p: 177.52 pid: 62481 b: GEDORE q: 0 st: lt: 6 ean: 4036976104202 sr: GEDORE 8000740 sr_no_br: 8000740 sr_no_br_cl: 8000740 sr_cl: GEDORE8000740 sr_dash: sold: 887.6 p_range: none type: standard act: 1 avo: 1 av: Max. width 250 mm Number of hooks 2 Max. height 200 mm Hydraulical No Puller type Universel puller n: GEDORE 1.06/3 universal puller 2-armed 250x200 mm - 8000740 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Tried-and-tested model for safely and quickly loosening discs, wheels, ball bearings, etc. Robust, die-forged design If required, the spindle can be replaced by a hydraulic spindle (see table) Adjustment scale for even setting of the hooks Enables centric, force-optimised retraction even with very high retraction forces Exchangeable hooks for different spindle depths are available as accessories Suitable for use with a hydraulic spindle (see table) ds: dsc: kts: universal puller 2-armed 250x200 mm kpn: 1.06/3 kpn_dash: kpn_clear: 1063 bkpn: GEDORE 1.06/3 bkpn_clear: GEDORE 1063 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore pullers / Gedore pullers / Gedore puller sr_no_br_cl_ns: 8000740 sr_ns: GEDORE8000740
r: 41231119 p: 215.041 pid: 60298 b: GEDORE q: 0 st: lt: 5 ean: 4036976106299 sr: GEDORE 1218980 sr_no_br: 1218980 sr_no_br_cl: 1218980 sr_cl: GEDORE1218980 sr_dash: sold: 860.164 p_range: none type: standard act: 1 avo: 1 av: Max. width 250 mm Puller type Universel puller Hydraulical No Number of hooks 2 Max. height 200 mm n: GEDORE 1.06/3-E universal quick release chuck 2-armed 250x200 mm - 1218980 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Tried-and-tested model for safely and quickly loosening discs, wheels, ball bearings, etc. Robust, die-forged design If required, the spindle can be replaced by a hydraulic spindle (see table) Adjustment scale for even setting of the hooks Enables centric, force-optimised retraction even with very high retraction forces Interchangeable hooks for several clamping depths are available as accessories Quick and uncomplicated setting and adjustment thanks to quick-release hooks Suitable for use with a hydraulic spindle (see table) ds: dsc: kts: universal quick release chuck 2-armed 250x200 mm kpn: 1.06/3-E kpn_dash: 1.06/3 kpn_clear: 1063E bkpn: GEDORE 1.06/3-E bkpn_clear: GEDORE 1063E c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore pullers / Gedore pullers / Gedore puller sr_no_br_cl_ns: 1218980 sr_ns: GEDORE1218980
r: 41294201 p: 272.561 pid: 99178 b: FACOM q: 0 st: lt: 7 ean: 3148510751771 sr: FACOM U.306-260 sr_no_br: U.306-260 sr_no_br_cl: U306260 sr_cl: FACOMU306260 sr_dash: FACOM U.306 sold: 817.683 p_range: none type: standard act: 1 avo: 1 av: Max. width 145 mm Max. height 250 mm Hydraulical No Supplier warranty FACOM - Lifetime (E) n: FACOM U.306-260 exterior puller cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description U.306 - Outside pullers Features Multifunctional: mounting of 2 or 3 jaws. Conversion possible to indoor puller with jaws U.306G2 + spare spindles U.306-4 or jaws U.306G20 + spare spindles U.306-2. Ease of use: trigger with self-locking jaws by means of a reset spring. The trigger remains in its position on the roller bearing even without tension. Safety: the jaws are held in position on the roller bearing by a knurled wheel. The trigger cannot detach from the roller bearing. Screw with force limiter: a locking pin breaks when the permitted torque is exceeded. Supplied with 2 spare locking pins. Set of 3 spare locking pins: see spare parts table according to tractor power. Adjustable attachments: impact weight U.306M (direct mounting) and trigger U.40 (mounting with washer and nut U.306A1, must be ordered separately). Trigger U.306-260 is supplied with spindles U.306-3 with extension. ds: dsc: kts: exterior puller kpn: U.306-260 kpn_dash: U.306 kpn_clear: U306260 bkpn: FACOM U.306-260 bkpn_clear: FACOM U306260 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Facom / Facom tools / Facom hand tools / Facom pullers / Facom pullers / Facom puller sr_no_br_cl_ns: U306260 sr_ns: FACOMU.306-260
r: 41895869 p: 115.537 pid: 63362 b: GEDORE q: 0 st: lt: 6 ean: 4036976120905 sr: GEDORE 1956361 sr_no_br: 1956361 sr_no_br_cl: 1956361 sr_cl: GEDORE1956361 sr_dash: sold: 808.759 p_range: none type: standard act: 1 avo: 1 av: Max. width 260 mm Puller type Universel puller Hydraulical No Number of hooks 2 Max. height 150 mm n: GEDORE 1.06/2A1-B universal puller 2-armed, all-steel hook with hook brake 210x150 mm - 1956361 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Robust, die-forged design One-piece forged hooks With hook brake - protection against unwanted movement of the hooks Hook can be moved on the crossbeam at the push of a button If required, the spindle can be replaced by a hydraulic spindle (see table) Adjustment scale for even setting of the hooks Enables centric, force-optimised retraction even with very high retraction forces Exchangeable hooks for different spindle depths are available as accessories ds: dsc: kts: universal puller 2-armed, all-steel hook with hook brake 210x150 mm kpn: 1.06/2A1-B kpn_dash: 1.06/2A1 kpn_clear: 1062A1B bkpn: GEDORE 1.06/2A1-B bkpn_clear: GEDORE 1062A1B c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore pullers / Gedore pullers / Gedore puller sr_no_br_cl_ns: 1956361 sr_ns: GEDORE1956361
r: 41230030 p: 67.603 pid: 37510 b: KUKKO q: 2 st: 1 lt: 1 ean: 4021176027178 sr: KUKKO 202-1 sr_no_br: 202-1 sr_no_br_cl: 2021 sr_cl: KUKKO2021 sr_dash: KUKKO 202 sold: 743.633 p_range: none type: standard act: 1 avo: 1 av: Max. width 150 mm Puller type Universel puller Hydraulical No Number of hooks 3 Max. height 85 mm n: KUKKO 202-1 three-arm trigger 150mm cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The 3-arm puller with rotatable and reversible pull hooks is used for centric pulling of bearings, gears and discs in all common sizes for Craft, workshop and Industry. It can be used to loosen any part that sits on a shaft and is freely accessible from outside. The rotatable draw hooks with adjustable clamping depth can be used on both sides. Depending on the version, the claw shape differs. The 3-arm construction guarantees even load distribution and therefore a particularly secure grip on the part to be pulled off. Application For centric extraction of bearings, gears and pulleys in all common sizes for manual trades, workshops and industry. ds: dsc: Scope of delivery 202-1-85-S:Set of towing hooks for 202 series 202-1-T:Bridge for 3-arm universal puller with reversible hooks 202-1, 202-S, 206-01, 209-01, 42-4 612140:Double-sided spindle tip for mechanical pressure spindles M12 - M14 614135:Spindle Ø 14 mm for spindle Thread M 14x1.5, 135 mm length, 4.5 mm Screw thread kts: three-arm trigger 150mm kpn: 202-1 kpn_dash: 202 kpn_clear: 2021 bkpn: KUKKO 202-1 bkpn_clear: KUKKO 2021 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 2021 sr_ns: KUKKO202-1
r: 41230035 p: 82.314 pid: 37805 b: KUKKO q: 2 st: 1 lt: 1 ean: 4021176016103 sr: KUKKO 44-2 sr_no_br: 44-2 sr_no_br_cl: 442 sr_cl: KUKKO442 sr_dash: KUKKO 44 sold: 740.826 p_range: none type: standard act: 1 avo: 1 av: Max. width 120 mm Puller type Universel puller Hydraulical No Number of hooks 2 Max. height 120 mm n: KUKKO 44-2 two-arm trigger 120mm cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The handy 2-arm Industrial puller with pulling hooks that are force-amplifying and self-centring is used for pulling bearings, gears and discs in all common sizes for Craft, workshop and Industry. With it, any part that is on a shaft and freely accessible from outside can be loosened. When the spindle pressure is built up, the part to be pulled is clamped tighter and tighter by the interconnected pulling hooks. Application For pulling bearings, gears and discs in all common sizes for Craft, workshop and Industry. ds: dsc: Scope of delivery 44-2-120-P:towing hooks (pair) for series 44 44-2-206:Transverse bark inner bushing with spindle for 2-arm universal puller with self-centring hooks 45-2, 44-2 44-2-T:2-arm Bridge for 2-arm universal tractor with self-centring drawbar hooks 44-2 612140:Double-sided spindle tip for mechanical pressure spindles M12 - M14 614160:Spindle Ø 14 mm for spindle Thread M 14x1.5, 160 mm length, 4.5 mm Screw thread kts: two-arm trigger 120mm kpn: 44-2 kpn_dash: 44 kpn_clear: 442 bkpn: KUKKO 44-2 bkpn_clear: KUKKO 442 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 442 sr_ns: KUKKO44-2
r: 02063271 p: 104.09 pid: 37601 b: KUKKO q: 0 st: lt: 6 ean: 4021176644771 sr: KUKKO 20-1+ sr_no_br: 20-1+ sr_no_br_cl: 201 sr_cl: KUKKO201 sr_dash: KUKKO 20 sold: 728.63 p_range: none type: standard act: 1 avo: 1 av: Max. width 90 mm Puller type Universel puller Hydraulical No Number of hooks 2 Max. height 100 mm n: KUKKO 20-1+ trigger with two arms 90x100mm cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Based on the ingenuity and pioneering spirit of Alfred Kleinbongartz, the universal tractors with sliding, always parallel drawbars of the 20+ series get a functional upgrade. Operating comfort and user-friendliness take centre stage. Specifically, the following optimisations have been implemented: For even more flexibility when pulling, the tractor range has been extended by two sizes (20-0+ and 20-00+). This creates a clamping range of 0 to 350 mm and a maximum tractive force of 2.5 to 8.5 tonnes for external pullers. To increase the load capacity, the tractors are equipped with reinforced shoulders, creating a stable H-profile. This is thanks to the newly thought-out, innovative construction of the Bridge, which guarantees maximum stability even at high traction forces. Above the Bridge, as an orientation aid, there is a scale for even shifting of the towing hooks, enabling safe adjustment of the hooks. Below the Bridge is another six-digit number in addition to the part number of the Bridge for reorders. The first three digits indicate which spindle is compatible with the Bridge. The last three digits (xxx) indicate the variable spindle length, which varies between 85 mm and 600 mm depending on the version. In addition to mechanical spindles with a different thread length, grease hydraulic spindles can also be used - depending on the size of the tractor - as part of a Hydraulic Upgrade for light and controlled pulling of particularly stuck parts. An additional advantage are the two eyelets on the side of the Bridge for attaching a Safety Spring (Series 660), which additionally secures the tractor and ensures safe fixation during work or storage. The 2-arm universal pullers with quickly adjustable and robust Standard puller hooks are used for particularly safe pulling of bearings, gears and discs in all common sizes for craft, workshop and industry. With these, any part that is on a shaft and freely accessible from outside can be loosened. By simply reversing the hooks, the pullers can also be used as internal pullers. Application For pulling bearings, gears and discs in all common sizes for Crafts, Workshop and Industry. ds: dsc: Scope of delivery 1-92-P:Quick-adjustable standard hitch (pair, clamping depth 100 mm) 20-1-T:Bridge for 2-arm universal puller 20-1 612140:Double-sided spindle tip for mechanical pressure spindles M12 - M14 614160:Spindle Ø 14 mm for spindle Thread M 14x1.5, 160 mm length, 4.5 mm Screw thread kts: trigger with two arms 90x100mm kpn: 20-1+ kpn_dash: 20 kpn_clear: 201 bkpn: KUKKO 20-1+ bkpn_clear: KUKKO 201 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 201 sr_ns: KUKKO20-1+
r: 41230031 p: 120.495 pid: 37892 b: KUKKO q: 2 st: 1 lt: 1 ean: 4021176027253 sr: KUKKO 202-2 sr_no_br: 202-2 sr_no_br_cl: 2022 sr_cl: KUKKO2022 sr_dash: KUKKO 202 sold: 722.97 p_range: none type: standard act: 1 avo: 1 av: Max. width 220 mm Puller type Universel puller Hydraulical No Number of hooks 3 Max. height 130 mm n: KUKKO 202-2 three-armed trigger 220mm cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The 3-arm puller with rotatable and reversible pull hooks is used for centric pulling of bearings, gears and discs in all common sizes for Craft, workshop and Industry. It can be used to loosen any part that sits on a shaft and is freely accessible from outside. The rotatable draw hooks with adjustable clamping depth can be used on both sides. Depending on the version, the claw shape differs. The 3-arm construction guarantees even load distribution and therefore a particularly secure grip on the part to be pulled off. Application For centric extraction of bearings, gears and pulleys in all common sizes for manual trades, workshops and industry. ds: dsc: Scope of delivery 202-2-130-S:Set of towing hooks for 202 series 202-2-T:Bridge for 3-arm universal puller with reversible hooks 202-2, 206-02, 206-02-B, 209-02, 42-5, 42-5-B 620260:Double-sided spindle tip for Mechanical pressure spindles M20, G1/2", G5/8", G3/4" 621220:Spindle Ø 20.955 mm for spindle Thread G 1/2" / 14, 220 mm length, 5.4 mm Threads kts: three-armed trigger 220mm kpn: 202-2 kpn_dash: 202 kpn_clear: 2022 bkpn: KUKKO 202-2 bkpn_clear: KUKKO 2022 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 2022 sr_ns: KUKKO202-2
