r: 41230085 p: 38.347 pid: 37852 b: KUKKO q: 4 st: 1 lt: 1 ean: 4021176015113 sr: KUKKO 41-2 sr_no_br: 41-2 sr_no_br_cl: 412 sr_cl: KUKKO412 sr_dash: KUKKO 41 sold: 1879.003 p_range: none type: standard act: 1 avo: 1 av: Max. width 80 mm Puller type Universel puller Hydraulical No Number of hooks 2 Max. height 80 mm n: KUKKO 41-2 tractor with two arms 80x80 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The 2-arm universal puller with swivel pull hooks is used for pulling bearings, gears and discs in all common sizes for Craft, workshop and Industry. It can be used to loosen any part sitting on a shaft and freely accessible from outside. The swivelling draw hooks ensure maximum freedom of movement even in restricted environmental conditions for individual adjustment to clamping range and clamping depth. Within the 41 series, there are different tractor versions. The compact model 41-0 features a hexagonal drive and a flat pressure piece on the spindle. Models 41-1 and 41-2 instead of the hexagon have a free-moving T-handle for working in the smallest spaces. From size 41-3 onwards, the tractors are equipped with a hexagon drive and a double spindle tip. This achieves the highest tractive forces (3 to 7 t). Application For pulling bearings, gears and discs in all common sizes for Craft, workshop and Industry. ds: dsc: Scope of delivery 41-1-T:Bridge for 2-arm universal puller with swivel brackets 41-1, 41-2 41-2-80-P:Swivelling drawbar hooks (pair) 609105:Spindle Ø 9 mm for spindle thread M 9x1.25, 105 mm length, 3.75 mm Screw thread kts: tractor with two arms 80x80 kpn: 41-2 kpn_dash: 41 kpn_clear: 412 bkpn: KUKKO 41-2 bkpn_clear: KUKKO 412 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 412 sr_ns: KUKKO41-2
r: 41230019 p: 210.082 pid: 37876 b: KUKKO q: 0 st: lt: 5 ean: 4021176014383 sr: KUKKO 38 sr_no_br: 38 sr_no_br_cl: 38 sr_cl: KUKKO38 sr_dash: sold: 1470.574 p_range: none type: standard act: 1 avo: 1 av: Max. width 250 mm Puller type Wheel hub puller Hydraulical No Number of hooks 5 n: KUKKO 38 wheel hub extractor 250mm cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The hub extractor with disc bridge is used for pulling wheel hubs on Trucks. Up to five towing hubs can be hung on the disc bridge, which can be moved freely on the bridge. This also makes it universally usable with different vehicle models. The freely movable T-handle on the spindle head guarantees manual tightening of the spindle in very limited space. Application For pulling wheel hubs on Trucks. ds: dsc: Scope of delivery 38-1:Brackets (separately) for hub axle 38-T:Disc for universal hub axle 38 40-3-8:Crank for hub axle 626181:Spindle for universal hub axle (38 series) 38, 40-3, 40-5 kts: wheel hub extractor 250mm kpn: 38 kpn_dash: kpn_clear: 38 bkpn: KUKKO 38 bkpn_clear: KUKKO 38 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 38 sr_ns: KUKKO38
r: 41230084 p: 43.471 pid: 39373 b: KUKKO q: 2 st: 1 lt: 1 ean: 4021176015861 sr: KUKKO 43-2 sr_no_br: 43-2 sr_no_br_cl: 432 sr_cl: KUKKO432 sr_dash: KUKKO 43 sold: 1434.543 p_range: none type: standard act: 1 avo: 1 av: Max. width 70 mm Puller type Universel puller Hydraulical No Number of hooks 2 Max. height 70 mm n: KUKKO 43-2 trigger with two arms 70mm cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The handy 2-armed small parts puller with power-strengthening and self-centring pulling hooks is used for sensitive pulling of small bearings, gears and discs in tight, poorly accessible gaps. The compact and space-saving design of the puller with narrow, widening towards the claw is ideally suited for electric motors. The freely movable pin on the T-handle guarantees comfortable one-handed tightening of the spindle in extremely tight places. Application For delicate pulling of small bearings, gears and discs in narrow, poorly accessible gaps. ds: dsc: Scope of delivery 43-1-206:Spindle for handy small puller 43-1, 43-2, 43-11, 43-12, 43-13, 27-A 43-1-T:Bridge for 2-arm universal puller with self-centring Bracket 43-3, 43-0-1, 43-1, 43-2, 27-A, 43-001 43-2-70-P:Pair of towing hooks for 43 series kts: trigger with two arms 70mm kpn: 43-2 kpn_dash: 43 kpn_clear: 432 bkpn: KUKKO 43-2 bkpn_clear: KUKKO 432 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 432 sr_ns: KUKKO43-2
r: 41294199 p: 176.694 pid: 98121 b: FACOM q: 2 st: 1 lt: 1 ean: 3148510751733 sr: FACOM U.306A140 sr_no_br: U.306A140 sr_no_br_cl: U306A140 sr_cl: FACOMU306A140 sr_dash: sold: 1413.552 p_range: none type: standard act: 1 avo: 1 av: Max. width 140 mm Max. height 147 mm Hydraulical No Supplier warranty FACOM - Lifetime (E) n: FACOM U.306A140 exterior puller cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description U.306 - Outside pullers Features Multifunctional: mounting of 2 or 3 jaws. Conversion possible to indoor puller with jaws U.306G2 + spare spindles U.306-4 or jaws U.306G20 + spare spindles U.306-2. Ease of use: trigger with self-locking jaws by means of a reset spring. The trigger remains in its position on the roller bearing even without tension. Safety: the jaws are held in position on the roller bearing by a knurled wheel. The trigger cannot detach from the roller bearing. Screw with force limiter: a locking pin breaks when the permitted torque is exceeded. Supplied with 2 spare locking pins. Set of 3 spare locking pins: see spare parts table according to tractor power. Adjustable attachments: impact weight U.306M (direct mounting) and trigger U.40 (mounting with washer and nut U.306A1, must be ordered separately). Trigger U.306-260 is supplied with spindles U.306-3 with extension. ds: dsc: kts: exterior puller kpn: U.306A140 kpn_dash: kpn_clear: U306A140 bkpn: FACOM U.306A140 bkpn_clear: FACOM U306A140 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Facom / Facom tools / Facom hand tools / Facom pullers / Facom pullers / Facom puller sr_no_br_cl_ns: U306A140 sr_ns: FACOMU.306A140
r: 41230083 p: 34.876 pid: 37846 b: KUKKO q: 2 st: 1 lt: 1 ean: 4021176015458 sr: KUKKO 43-1 sr_no_br: 43-1 sr_no_br_cl: 431 sr_cl: KUKKO431 sr_dash: KUKKO 43 sold: 1395.04 p_range: none type: standard act: 1 avo: 1 av: Max. width 60 mm Puller type Universel puller Hydraulical No Number of hooks 2 Max. height 50 mm n: KUKKO 43-1 two-arm trigger 60mm cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The handy 2-armed small parts puller with power-strengthening and self-centring pulling hooks is used for sensitive pulling of small bearings, gears and discs in tight, poorly accessible gaps. The compact and space-saving design of the puller with narrow, widening towards the claw is ideally suited for electric motors. The freely movable pin on the T-handle guarantees comfortable one-handed tightening of the spindle in extremely tight places. Application For delicate pulling of small bearings, gears and discs in narrow, poorly accessible gaps. ds: dsc: Scope of delivery 43-1-206:Spindle for hand-held small tractors 43-1, 43-2, 43-11, 43-12, 43-13, 27-A 43-1-50-P:Pair of tow hooks for 43 series 43-1-T:Bridge for 2-arm universal puller with self-centring Bracket 43-3, 43-0-1, 43-1, 43-2, 27-A, 43-001 43-2-70-P:Pair of drawbar eyes for 43 series kts: two-arm trigger 60mm kpn: 43-1 kpn_dash: 43 kpn_clear: 431 bkpn: KUKKO 43-1 bkpn_clear: KUKKO 431 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 431 sr_ns: KUKKO43-1
r: 41961373 p: 221.983 pid: 62886 b: GEDORE q: 1 st: 1 lt: 1 ean: 4036976104219 sr: GEDORE 8000820 sr_no_br: 8000820 sr_no_br_cl: 8000820 sr_cl: GEDORE8000820 sr_dash: sold: 1331.898 p_range: none type: standard act: 1 avo: 1 av: Max. width 350 mm Number of hooks 2 Max. height 200 mm Hydraulical No Puller type Universel puller n: GEDORE 1.06/3A universal puller 2-arm 350x200 mm - 8000820 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Tried-and-tested model for safely and quickly loosening discs, wheels, ball bearings, etc. Robust, die-forged design If required, the spindle can be replaced by a hydraulic spindle (see table) Adjustment scale for even setting of the hooks Enables centric, force-optimised retraction even with very high retraction forces Exchangeable hooks for different spindle depths are available as accessories Suitable for use with a hydraulic spindle (see table) ds: dsc: kts: universal puller 2-arm 350x200 mm kpn: 1.06/3A kpn_dash: kpn_clear: 1063A bkpn: GEDORE 1.06/3A bkpn_clear: GEDORE 1063A c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore pullers / Gedore pullers / Gedore puller sr_no_br_cl_ns: 8000820 sr_ns: GEDORE8000820
r: 41230032 p: 33.223 pid: 37896 b: KUKKO q: 6 st: 1 lt: 1 ean: 4021176015038 sr: KUKKO 41-1 sr_no_br: 41-1 sr_no_br_cl: 411 sr_cl: KUKKO411 sr_dash: KUKKO 41 sold: 1295.697 p_range: none type: standard act: 1 avo: 1 av: Max. width 65 mm Puller type Universel puller Hydraulical No Number of hooks 2 Max. height 65 mm n: KUKKO 41-1 tractor with two arms 65x65 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The 2-arm universal puller with swivel pull hooks is used for pulling bearings, gears and discs in all common sizes for Craft, workshop and Industry. It can be used to loosen any part sitting on a shaft and freely accessible from outside. The swivelling draw hooks ensure maximum freedom of movement even in restricted environmental conditions for individual adjustment to clamping range and clamping depth. Within the 41 series, there are different tractor versions. The compact model 41-0 features a hexagonal drive and a flat pressure piece on the spindle. Models 41-1 and 41-2 instead of the hexagon have a free-moving T-handle for working in the smallest spaces. From size 41-3 onwards, the tractors are equipped with a hexagon drive and a double spindle tip. This achieves the highest tractive forces (3 to 7 t). Application For pulling bearings, gears and discs in all common sizes for Craft, workshop and Industry. ds: dsc: Scope of delivery 41-1-65-P:Swivelling drawbar hooks (pair) 41-1-T:Bridge for 2-arm universal puller with swivelling hooks 41-1, 41-2 609087:Spindle Ø 9 mm for spindle Thread M 9x1.25, 87 mm length, 3.75 mm Screw thread kts: tractor with two arms 65x65 kpn: 41-1 kpn_dash: 41 kpn_clear: 411 bkpn: KUKKO 41-1 bkpn_clear: KUKKO 411 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 411 sr_ns: KUKKO41-1
r: 01041296 p: 403.966 pid: 49497 b: GEDORE q: 0 st: lt: 6 ean: 4036976105636 sr: GEDORE 8017200 sr_no_br: 8017200 sr_no_br_cl: 8017200 sr_cl: GEDORE8017200 sr_dash: sold: 1211.898 p_range: none type: standard act: 1 avo: 1 av: Max. width 60 mm Max. height 160 mm Hydraulical No Number of hooks 3 n: GEDORE 1.37/2 cylinder barrel puller - 8017200 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description This puller allows cylinder bushings on trucks (e.g. Mercedes Benz, MAN), passenger cars, stationary engines and other parts can be pulled out Operating instructions Screw the spindle of the counter bearing into the clamping nut of the extractor and guide the extractor into the bushing Place the counter support on the cylinder block By turning the spindle, the new spreading system allows all three jaws to be quickly and easily spread tightly under the edge of the canister Then tighten the nut on the counter support ds: dsc: kts: cylinder barrel puller kpn: 1.37/2 kpn_dash: kpn_clear: 1372 bkpn: GEDORE 1.37/2 bkpn_clear: GEDORE 1372 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore pullers / Gedore pullers / Gedore puller sr_no_br_cl_ns: 8017200 sr_ns: GEDORE8017200
r: 01901664 p: 549.917 pid: 79109 b: SKF q: 1 st: 1 lt: 1 ean: 7316572464724 sr: SKF TMMA 60 sr_no_br: TMMA 60 sr_no_br_cl: TMMA60 sr_cl: SKFTMMA60 sr_dash: sold: 1099.834 p_range: none type: standard act: 1 avo: 1 av: Max. width 150 mm Hydraulical No Number of hooks 3 Max. height 150 mm n: SKF TMMA 60 EasyPull mechanical puller 36-150mm 150mm 60kN cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The SKF EasyPull TMMA 60 is one of the most user-friendly and safest bearing dismounting tools on the market. It is very robust and ergonomically designed and features spring-operated arms that enable the user to position the puller behind the component with just one movement. The TMMA 60 is mechanically operated and capable of withdrawal forces up to 60 kN for components with a maximum outer diameter of 150 mm (5.9 in). Unique red rings spring-operated opening mechanism allow the TMMA 60 to be placed behind the component with just one movement Self-centring capability and nosepiece help to avoid damage to shaft Self-locking arms help to prevent puller slipping under load Sturdy design allows safe dismounting of components in the tightest applications Efficient use of time due to quick dismounting ds: dsc: Scope of delivery 1x Puller TMMA 60 with mechanical spindle 1x Tube of spindle grease LGEV2/0.035 1x Printed instructions for use kts: EasyPull mechanical puller 36-150mm 150mm 60kN kpn: TMMA 60 kpn_dash: kpn_clear: TMMA60 bkpn: SKF TMMA 60 bkpn_clear: SKF TMMA60 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Skf / Skf tools / Skf hand tools / Skf pullers / Skf pullers / Skf puller sr_no_br_cl_ns: TMMA60 sr_ns: SKFTMMA60
r: 41231117 p: 132.066 pid: 60295 b: GEDORE q: 0 st: lt: 6 ean: 4036976106275 sr: GEDORE 1216570 sr_no_br: 1216570 sr_no_br_cl: 1216570 sr_cl: GEDORE1216570 sr_dash: sold: 1056.528 p_range: none type: standard act: 1 avo: 1 av: Max. width 160 mm Puller type Universel puller Hydraulical No Number of hooks 2 Max. height 150 mm n: GEDORE 1.06/2-E universal quick release lever 2-arm 160x150 mm - 1216570 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Tried-and-tested model for safely and quickly loosening discs, wheels, ball bearings, etc. Robust, die-forged design If required, the spindle can be replaced by a hydraulic spindle (see table) Adjustment scale for even setting of the hooks Enables centric, force-optimised retraction even with very high retraction forces Interchangeable hooks for several clamping depths are available as accessories Quick and uncomplicated setting and adjustment thanks to quick-release hooks Suitable for use with a hydraulic spindle (see table) ds: dsc: kts: universal quick release lever 2-arm 160x150 mm kpn: 1.06/2-E kpn_dash: 1.06/2 kpn_clear: 1062E bkpn: GEDORE 1.06/2-E bkpn_clear: GEDORE 1062E c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore pullers / Gedore pullers / Gedore puller sr_no_br_cl_ns: 1216570 sr_ns: GEDORE1216570
r: 41294088 p: 347.066 pid: 98063 b: FACOM q: 0 st: lt: 8 ean: 3148510667003 sr: FACOM U.20 sr_no_br: U.20 sr_no_br_cl: U20 sr_cl: FACOMU20 sr_dash: sold: 1041.198 p_range: none type: standard act: 1 avo: 1 av: Max. width 170 mm Hydraulical No Number of hooks 2 Supplier warranty FACOM - Lifetime (R) Max. height 160 mm n: FACOM U.20 boot puller with short jaws cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Outside puller with short jaws Features Safety: the jaws are held in the correct position by the central nut on the roller bearing. The puller cannot detach from the roller bearing. Spindle with force limiter. A locking pin breaks when the permitted torque is exceeded. Spindle with 2 spare locking pins. Set of 3 spare locking pins: U.306-24J3. Equipped with a washer against turning along U.20-12. The ring protects the screw when a rod is used to prevent the trigger from turning with it. Adjustable attachment: stroke weight U.2. ds: dsc: kts: boot puller with short jaws kpn: U.20 kpn_dash: kpn_clear: U20 bkpn: FACOM U.20 bkpn_clear: FACOM U20 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Facom / Facom tools / Facom hand tools / Facom pullers / Facom pullers / Facom puller sr_no_br_cl_ns: U20 sr_ns: FACOMU.20
r: 41983100 p: 167.438 pid: 39709 b: KUKKO q: 0 st: lt: 7 ean: 4021176016691 sr: KUKKO 45-3 sr_no_br: 45-3 sr_no_br_cl: 453 sr_cl: KUKKO453 sr_dash: KUKKO 45 sold: 1004.628 p_range: none type: standard act: 1 avo: 1 av: Max. width 160 mm Puller type Universel puller Hydraulical No Number of hooks 3 Max. height 160 mm n: KUKKO 45-3 tractor with three arms 160x160 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The handy, 3-armed industrial puller with power-assisted and self-centring puller hooks is used for pulling bearings, gears and discs in all common sizes for Craft, workshop and Industry. It can be used to loosen any part sitting on a spindle and freely accessible from outside. When the spindle pressure is built up, the part to be loosened is clamped ever more tightly by the interconnected draw hooks. The 3-arm design guarantees even load distribution and therefore a particularly secure hold on the part to be pulled off. Application For pulling bearings, gears and pulleys in all common sizes for manual trades, workshops and industry. ds: dsc: Scope of delivery 44-3-206:Transverse bushing with spindle for 2-arm universal puller with self-centring hooks 45-3, 44-3 45-3-160-S:Tow hooks (set) for series 45 45-3-T:Bridge for 3-arm universal puller with self-centring hooks 45-3 616180:Double-sided spindle tip for Mechanical pressure spindles M16, M16x1.5 and M18x1.5 618210:Spindle Ø 18 mm for spindle Thread M 18x1.5, 210 mm length, 4.5 mm Screw thread kts: tractor with three arms 160x160 kpn: 45-3 kpn_dash: 45 kpn_clear: 453 bkpn: KUKKO 45-3 bkpn_clear: KUKKO 453 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 453 sr_ns: KUKKO45-3
r: 41980031 p: 110.702 pid: 38203 b: KUKKO q: 0 st: lt: 4 ean: 4021176644856 sr: KUKKO 20-10+ sr_no_br: 20-10+ sr_no_br_cl: 2010 sr_cl: KUKKO2010 sr_dash: KUKKO 20 sold: 996.318 p_range: none type: standard act: 1 avo: 1 av: Max. width 120 mm Puller type Universel puller Hydraulical No Number of hooks 2 Max. height 100 mm n: KUKKO 20-10+ two-arm trigger 120x100mm cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Based on the ingenuity and pioneering spirit of Alfred Kleinbongartz, the universal tractors with sliding, always parallel drawbars of the 20+ series get a functional upgrade. Operating comfort and user-friendliness take centre stage. Specifically, the following optimisations have been implemented: For even more flexibility when pulling, the tractor range has been extended by two sizes (20-0+ and 20-00+). This creates a clamping range of 0 to 350 mm and a maximum tractive force of 2.5 to 8.5 tonnes for external pullers. To increase the load capacity, the tractors are equipped with reinforced shoulders, creating a stable H-profile. This is thanks to the newly thought-out, innovative construction of the Bridge, which guarantees maximum stability even at high traction forces. Above the Bridge, as an orientation aid, there is a scale for even shifting of the towing hooks, enabling safe adjustment of the hooks. Below the Bridge is another six-digit number in addition to the part number of the Bridge for reorders. The first three digits indicate which spindle is compatible with the Bridge. The last three digits (xxx) indicate the variable spindle length, which varies between 85 mm and 600 mm depending on the version. In addition to mechanical spindles with a different thread length, grease hydraulic spindles can also be used - depending on the size of the tractor - as part of a Hydraulic Upgrade for light and controlled pulling of particularly stuck parts. An additional advantage are the two eyelets on the side of the Bridge for attaching a Safety Spring (Series 660), which additionally secures the tractor and ensures safe fixation during work or storage. The 2-arm universal pullers with quickly adjustable and robust Standard puller hooks are used for particularly safe pulling of bearings, gears and discs in all common sizes for craft, workshop and industry. With these, any part that is on a shaft and freely accessible from outside can be loosened. By simply reversing the tow hooks, the pullers can also be used as internal pullers. Application For pulling bearings, gears and discs in all common sizes for Crafts, Workshop and Industry. ds: dsc: Scope of delivery 1-92-P:Quick-adjustable standard hitch (pair, clamping depth 100 mm) 20-1-T:Bridge for 2-arm universal puller 20-1 20-10-T:Bridge for 2-arm universal puller 20-10 612140:Double-sided spindle tip for mechanical pressure spindles M12 - M14 614160:Spindle Ø 14 mm for spindle Thread M 14x1.5, 160 mm length, 4.5 mm Screw thread kts: two-arm trigger 120x100mm kpn: 20-10+ kpn_dash: 20 kpn_clear: 2010 bkpn: KUKKO 20-10+ bkpn_clear: KUKKO 2010 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 2010 sr_ns: KUKKO20-10+
r: 41230037 p: 165.454 pid: 37516 b: KUKKO q: 0 st: lt: 2 ean: 4021176016363 sr: KUKKO 44-4 sr_no_br: 44-4 sr_no_br_cl: 444 sr_cl: KUKKO444 sr_dash: KUKKO 44 sold: 992.724 p_range: none type: standard act: 1 avo: 1 av: Max. width 250 mm Puller type Universel puller Hydraulical No Number of hooks 2 Max. height 200 mm n: KUKKO 44-4 puller with two arms 250mm cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The handy 2-arm Industrial puller with pulling hooks that are force-amplifying and self-centring is used for pulling bearings, gears and discs in all common sizes for Craft, workshop and Industry. With it, any part that is on a shaft and freely accessible from outside can be loosened. When the spindle pressure is built up, the part to be pulled is clamped tighter and tighter by the interconnected pulling hooks. Application For pulling bearings, gears and discs in all common sizes for Craft, workshop and Industry. ds: dsc: Scope of delivery 44-4-200-P:Tow hooks (pair) for series 44 44-4-206:Transverse bushing with spindle for 2- and 3-arm universal puller with self-centring hooks 45-4, 44-4 44-4-T:2-arm inner bushing for 2-arm universal jointed drawbar with self-centring hooks 44-8, 44-7, 44-5, 44-6, 44-4 kts: puller with two arms 250mm kpn: 44-4 kpn_dash: 44 kpn_clear: 444 bkpn: KUKKO 44-4 bkpn_clear: KUKKO 444 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 444 sr_ns: KUKKO44-4
