Choose your filter
Filter
Categories
Brand
Stocked items only
Price excl. VAT
to €
Milling type
Shank type
Contains diameters (Ø mm)
Surface
Tool material
Variant
Cutting direction
Coolant feed
Standard
Type

Buy a Gift Card

Phantom HSS-E countersink sets, head countersink sets and shank cutter sets

These Phantom sets combine countersinks, head countersinks, shank cutters and burrs in a cassette, for anyone who regularly countersinks holes or mills slots and pockets in metal in the workshop. A set lays out consecutive sizes side by side, so you are not looking for a separate tool for each hole.

Countersink sets to DIN 335-C have a 90° angle and three cutting edges, run from 6.3 to 20.5 or to 25 mm and also come with AlTiN-X coating. A three-surface shank holds the countersink firmly in the chuck. A single-edge set covers diameters from 10 to 30 mm. Head countersink sets for M3 to M10 are chosen by the screw head: DIN 1866 at 90° for countersunk heads, DIN 373 at 180° for a flat counterbore under cheese heads.

HSS-E shank cutter sets come as 2-cutter, 3-cutter or multi-cutter, in series from 3 to 20 mm or from 4 to 12 mm. For deburring and contour work there is a carbide burr set with shapes B, C, D, F and G. These sets complement the HSS and HSS-E drill bit cassettes from Phantom within Phantom sets and kits.

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.