Product description
- PFERD Tungsten carbide burr cylindrical ZYAS end cut dia. 03x13 mm shank dia. 3x75 mm Z5 universal fine
Characteristics
- Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys
- It achieves a good surface
- Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing
- They provide a good stock removal rate and are not specific to a particular material
- Cylindrical burr according to DIN 8032 with circumferential and end cut conforming to DIN 8033
- Tungsten carbide burrs with a long shank are ideal for efficiently machining small, hard-to-reach areas of components
- They can be shortened if required
- Tungsten carbide burrs with the designation GL 75 mm are made from solid tungsten carbide, which means they can only be shortened using diamond tools
Advantages:
- Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
- Long tool life.
- The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
- High surface quality.