r: 08077736 p: 15.21 pid: 36864 b: PFERD q: 0 st: lt: 8 ean: 4007220032961 sr: PFERD 43200305 sr_no_br: 43200305 sr_no_br_cl: 43200305 sr_cl: PFERD43200305 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 5 mm Connection type (machine) Shank Material (brush filament) Silicon carbide Wire thickness 0,25 mm Twisted No Height 45 mm Connection size (machine) 2,34 mm n: PFERD PBU 0505/2,34 SiC 800 0,25 miniature brush brush Ø 5 mm shank-Ø 2.34 mm SiC filament wire-Ø 0.25 grit 800 - 43200305 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD Miniature end brush PBU dia. 5 mm shank dia. 2.34 mm SiC filament dia. 0.25 grit 800 Characteristics Suitable for light brushing such as deburring, cleaning and polishing PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature brush brush Ø 5 mm shank-Ø 2.34 mm SiC filament wire-Ø 0.25 grit 800 kpn: PBU 0505/2,34 SiC 800 0,25 kpn_dash: kpn_clear: PBU0505234SiC800025 bkpn: PFERD PBU 0505/2,34 SiC 800 0,25 bkpn_clear: PFERD PBU0505234SiC800025 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200305 sr_ns: PFERD43200305
r: 08078243 p: 15.2 pid: 65524 b: PFERD q: 0 st: lt: 8 ean: 4007220585979 sr: PFERD 45006008 sr_no_br: 45006008 sr_no_br_cl: 45006008 sr_cl: PFERD45006008 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 150 mm Length 2000 mm Grit size 80 n: PFERD 45006008 corundum grinding belt BA 150x2000 mm A80 for universal use with belt grinder cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description PFERD aluminium oxide abrasive belt BA 150x2000mm A80 for general use with a belt grinder Characteristics For general applications from coarse to fine grinding Long belts are compatible with commonly available belt grinders In ISO 2976, they are listed under the designation ""abrasive belts"" Advantages: High tear strength with optimum flexibility. Consistent results through very good grain adhesion. High economic efficiency due to high abrasive performance and long tool life. ds: dsc: kts: corundum grinding belt BA 150x2000 mm A80 for universal use with belt grinder kpn: 45006008 kpn_dash: kpn_clear: 45006008 bkpn: PFERD 45006008 bkpn_clear: PFERD 45006008 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding belt | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding belt sr_no_br_cl_ns: 45006008 sr_ns: PFERD45006008
r: 08077993 p: 15.17 pid: 35566 b: PFERD q: 0 st: lt: 10 ean: 4007220955161 sr: PFERD 43305031 sr_no_br: 43305031 sr_no_br_cl: 43305031 sr_cl: PFERD43305031 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 65 mm Connection size (machine) M14 Connection type (machine) Internal thread Twisted Yes Wire thickness 0,5 mm Material (brush filament) Steel wire n: PFERD 43305031 COMBITWIST bowl brush knotted TBG Ø 65 mm M14 steel wire dia 0.50 mm angle grinder cn: CUP BRUSH cn2: CUP BRUSH cn_clear: CUPBRUSH d: Product description PFERD COMBITWIST cup brush knotted TBG dia. 65 mm M14 steel wire dia. 0.50 mm angle grinders Characteristics Very aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: COMBITWIST bowl brush knotted TBG Ø 65 mm M14 steel wire dia 0.50 mm angle grinder kpn: 43305031 kpn_dash: kpn_clear: 43305031 bkpn: PFERD 43305031 bkpn_clear: PFERD 43305031 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Cup brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd cup brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Cup brush sr_no_br_cl_ns: 43305031 sr_ns: PFERD43305031
r: 02964927 p: 15.11 pid: 65744 b: PFERD q: 0 st: lt: 8 ean: 4007220113806 sr: PFERD 67689063 sr_no_br: 67689063 sr_no_br_cl: 67689063 sr_cl: PFERD67689063 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 125 mm Grit size 40 Bore size 22,2 mm Version (flap disc) Conical For material Steel; Stainless steel (Disc) attachment X-Lock n: PFERD PFR 125-L Z 40 SGP CURVE STEELOX/X-LOCK POLIFAN flap disc 125mm width L grit 40 for steel/precious steel - 67689063 cn: FLAP DISC cn2: FLAP DISC cn_clear: FLAPDISC d: Product description PFERD POLIFAN CURVE flap disc PFR 125 mm X-LOCK width L Z40 SGP STEELOX for steel/stainless steel Characteristics Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use The POLIFAN-CURVE flap disc has been specially developed for work on fillet welds It is the only flap disc in the world that has flaps on both the grinding side and on the rear side, as well as on the radius PFERD's POLIFAN CURVE is patented in many countries across the globe High-performance flap disc for maximum stock removal on steel and stainless steel (INOX) The Bosch X-LOCK system for angle grinders enables you to change tools quickly and easily Instead of a round centre hole, the X-LOCK system features an X-shaped contour, which allows the tool to be fixed on the angle grinder in a form-fitting manner This means different kinds of tools can be clamped in a reliable manner in a very short space of time The unique system meets the highest of quality and safety standards and can withstand rough and harsh application conditions ;X-LOCK from Bosch is the world's first quick-changing system for angle grinders: Position the tool in the X-LOCK holder, click it into place - and you're ready! It's never been so easy to change accessories on angle grinders X-LOCK is creating a new standard which makes professionals' lives easier and increases their productivity Bosch Power Tools relies on strong partners like PFERD PFERD has developed the principle for connecting the X-LOCK punched part with the bonded abrasive, flap discs and brushes and created the conditions to enable them to be produced industrially Advantages: With X-LOCK arbor for quick and easy tool changing. Secure fixing as the tool audibly clicks into place. POLIFAN flap discs with X-LOCK can also be used on traditional angle grinders with M14 and 5/8""-11 threads. Outstanding tool life when working on fillet welds and high stock removal rate, ensuring fast working and lower production costs. Excellent tool life when working on fillet welds. Precise and optimum grinding of the fillet weld geometry. ds: dsc: kts: POLIFAN flap disc 125mm width L grit 40 for steel/precious steel kpn: PFR 125-L Z 40 SGP CURVE STEELOX/X-LOCK kpn_dash: PFR 125 kpn_clear: PFR125LZ40SGPCURVESTEELOXXLOCK bkpn: PFERD PFR 125-L Z 40 SGP CURVE STEELOX/X-LOCK bkpn_clear: PFERD PFR125LZ40SGPCURVESTEELOXXLOCK c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap disc | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Slat disc sr_no_br_cl_ns: 67689063 sr_ns: PFERD67689063
r: 03164242 p: 15.05 pid: 71274 b: PFERD q: 0 st: lt: 8 ean: 4007220658680 sr: PFERD 43107012 sr_no_br: 43107012 sr_no_br_cl: 43107012 sr_cl: PFERD43107012 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 76 mm Connection type (machine) Shank Material (brush filament) Steel wire Wire thickness 0,5 mm Twisted Yes Thickness 12 mm Max. no-load speed 25000 rpm Connection size (machine) 6 mm n: PFERD 7012/6 ST 0,50 round brush twisted RBG Ø 76 x 12 mm pin-Ø 6 mm steel wire-Ø 0.50 - 43107012 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush knotted RBG dia. 76x12 mm shank dia. 6 mm steel wire dia. 0.50 Characteristics Aggressive brush for cleaning, derusting and work on weld seams Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Optimal access to hard-to-reach areas such as grooves and recesses. Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: round brush twisted RBG Ø 76 x 12 mm pin-Ø 6 mm steel wire-Ø 0.50 kpn: 7012/6 ST 0,50 kpn_dash: kpn_clear: 70126ST050 bkpn: PFERD 7012/6 ST 0,50 bkpn_clear: PFERD 70126ST050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43107012 sr_ns: PFERD43107012
r: 03163997 p: 15 pid: 70022 b: PFERD q: 0 st: lt: 10 ean: 4007220153000 sr: PFERD 43101003 sr_no_br: 43101003 sr_no_br_cl: 43101003 sr_cl: PFERD43101003 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 20 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,2 mm Twisted No Thickness 4 mm Max. no-load speed 20000 rpm Connection size (machine) 6 mm n: PFERD 2004/6 INOX 0,20 round brush unturned RBU Ø 20 x 4 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 - 43101003 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush crimped RBU dia. 20x4 mm shank dia. 6 mm stainless steel wire dia. 0.20 Characteristics Generally suitable for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: round brush unturned RBU Ø 20 x 4 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 kpn: 2004/6 INOX 0,20 kpn_dash: kpn_clear: 20046INOX020 bkpn: PFERD 2004/6 INOX 0,20 bkpn_clear: PFERD 20046INOX020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43101003 sr_ns: PFERD43101003
r: 03164105 p: 14.98 pid: 69457 b: PFERD q: 0 st: lt: 8 ean: 4007220104798 sr: PFERD 43104010 sr_no_br: 43104010 sr_no_br_cl: 43104010 sr_cl: PFERD43104010 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 60 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,2 mm Twisted No Thickness 10 mm Max. no-load speed 15000 rpm Connection size (machine) 6 mm n: PFERD 6010/6 INOX 0,20 round brush unturned RBU Ø 60 x 10 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 - 43104010 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush crimped RBU dia. 60x10 mm shank dia. 6 mm stainless steel wire dia. 0.20 Characteristics Generally suitable for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: round brush unturned RBU Ø 60 x 10 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 kpn: 6010/6 INOX 0,20 kpn_dash: kpn_clear: 60106INOX020 bkpn: PFERD 6010/6 INOX 0,20 bkpn_clear: PFERD 60106INOX020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43104010 sr_ns: PFERD43104010
r: 08079757 p: 14.94 pid: 64369 b: PFERD q: 0 st: lt: 8 ean: 4007220586600 sr: PFERD 45011310 sr_no_br: 45011310 sr_no_br_cl: 45011310 sr_cl: PFERD45011310 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 20 mm Length 520 mm Grit size 100 n: PFERD 45011310 fleece grinding belt VB 20x520 mm A100 G for fine grinding & finishing with belt grinder cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description PFERD Non-woven abrasive belt VB 20x520 mm A100 G for fine grinding and finishing with a belt grinder Characteristics Suitable for general work on surfaces such as metal tubular structures, e.g. removing rough grinding traces, removing oxidation and light deburring work Achieve matt and satin-finished surfaces Short belts are compatible with commonly available belt grinders In ISO 2976, they are listed under the designation ""abrasive belts"" POLIVLIES grit size 100 G = coarse (yellow-brown) Advantages: High economic efficiency due to high abrasive performance and long tool life. High tear strength with optimum flexibility. Consistent results through very good grain adhesion. ds: dsc: kts: fleece grinding belt VB 20x520 mm A100 G for fine grinding & finishing with belt grinder kpn: 45011310 kpn_dash: kpn_clear: 45011310 bkpn: PFERD 45011310 bkpn_clear: PFERD 45011310 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding belt | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding belt sr_no_br_cl_ns: 45011310 sr_ns: PFERD45011310
r: 08079767 p: 14.94 pid: 64105 b: PFERD q: 0 st: lt: 8 ean: 4007220586648 sr: PFERD 45011418 sr_no_br: 45011418 sr_no_br_cl: 45011418 sr_cl: PFERD45011418 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 35 mm Length 450 mm Grit size 180 n: PFERD 45011418 fleece grinding belt VB 35x450 mm A180 M for fine grinding & finishing with pipe grinder cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description PFERD Non-woven abrasive belt VB 35x450 mm A180 M for fine grinding and finishing with a pipe belt grinder Characteristics Suitable for general work on surfaces such as metal tubular structures, e.g. removing rough grinding traces, removing oxidation and light deburring work Achieve matt and satin-finished surfaces Short belts are compatible with commonly available belt grinders In ISO 2976, they are listed under the designation ""abrasive belts"" POLIVLIES grit size 180 M = medium (red-brown) Advantages: High economic efficiency due to high abrasive performance and long tool life. High tear strength with optimum flexibility. Consistent results through very good grain adhesion. ds: dsc: kts: fleece grinding belt VB 35x450 mm A180 M for fine grinding & finishing with pipe grinder kpn: 45011418 kpn_dash: kpn_clear: 45011418 bkpn: PFERD 45011418 bkpn_clear: PFERD 45011418 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding belt | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding belt sr_no_br_cl_ns: 45011418 sr_ns: PFERD45011418
r: 08079723 p: 14.78 pid: 68501 b: PFERD q: 0 st: lt: 8 ean: 4007220104316 sr: PFERD 44692264 sr_no_br: 44692264 sr_no_br_cl: 44692264 sr_cl: PFERD44692264 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 115 mm Grit size 100 Bore size 22,2 mm For material Steel; Stainless steel; Non-ferrous metal Series POLINOX (Disc) attachment Bore hole n: PFERD PNZ 115-22,23 A 100 POLINOX fleece grinding wheel 115mm bore 22,23mm grit 100 for fine grinding & finishing - 44692264 cn: FLAP DISC cn2: FLAP DISC cn_clear: FLAPDISC d: Product description PFERD POLINOX non-woven fibre-backing disc PNZ dia. 115 mm centre hole dia. 22.23 mm A100 for fine grinding and finishing Characteristics POLINOX grinding discs consist of non-woven polyamide abrasive, into which abrasive grain is integrated The non-woven and abrasive-cloth flaps are stuck to a glass-fabric backing pad, meaning that the discs can be used face-down on large surfaces A long tool life is achieved through the dense packing of the flaps The tool is designed for working on large surfaces with speed-adjustable angle grinders Advantages: Highly flexible, enabling optimal adjustment to the contour. Cool grinding and low thermal load on the workpiece. The open structure and high flexibility of the non-woven material prevents tool clogging. ds: dsc: kts: POLINOX fleece grinding wheel 115mm bore 22,23mm grit 100 for fine grinding & finishing kpn: PNZ 115-22,23 A 100 kpn_dash: PNZ 115 kpn_clear: PNZ1152223A100 bkpn: PFERD PNZ 115-22,23 A 100 bkpn_clear: PFERD PNZ1152223A100 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap disc | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Slat disc sr_no_br_cl_ns: 44692264 sr_ns: PFERD44692264
r: 08079724 p: 14.78 pid: 67931 b: PFERD q: 0 st: lt: 8 ean: 4007220104323 sr: PFERD 44692265 sr_no_br: 44692265 sr_no_br_cl: 44692265 sr_cl: PFERD44692265 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 115 mm Grit size 180 Bore size 22,2 mm For material Steel; Stainless steel; Non-ferrous metal Series POLINOX (Disc) attachment Bore hole n: PFERD PNZ 115-22,23 A 180 POLINOX fleece grinding wheel 115mm bore 22,23mm grit 180 for fine grinding & finishing - 44692265 cn: FLAP DISC cn2: FLAP DISC cn_clear: FLAPDISC d: Product description PFERD POLINOX non-woven fibre-backing disc PNZ dia. 115 mm centre hole dia. 22.23 mm A180 for fine grinding and finishing Characteristics POLINOX grinding discs consist of non-woven polyamide abrasive, into which abrasive grain is integrated The non-woven and abrasive-cloth flaps are stuck to a glass-fabric backing pad, meaning that the discs can be used face-down on large surfaces A long tool life is achieved through the dense packing of the flaps The tool is designed for working on large surfaces with speed-adjustable angle grinders Advantages: Highly flexible, enabling optimal adjustment to the contour. Cool grinding and low thermal load on the workpiece. The open structure and high flexibility of the non-woven material prevents tool clogging. ds: dsc: kts: POLINOX fleece grinding wheel 115mm bore 22,23mm grit 180 for fine grinding & finishing kpn: PNZ 115-22,23 A 180 kpn_dash: PNZ 115 kpn_clear: PNZ1152223A180 bkpn: PFERD PNZ 115-22,23 A 180 bkpn_clear: PFERD PNZ1152223A180 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap disc | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Slat disc sr_no_br_cl_ns: 44692265 sr_ns: PFERD44692265
r: 02874407 p: 14.77 pid: 65714 b: PFERD q: 0 st: lt: 8 ean: 4007220844939 sr: PFERD 67689072 sr_no_br: 67689072 sr_no_br_cl: 67689072 sr_cl: PFERD67689072 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 150 mm Grit size 40 Bore size 22,2 mm Version (flap disc) Conical For material Steel; Stainless steel (Disc) attachment Bore hole n: PFERD PFR 150-M Z 40 SGP CURVE STEELOX POLIFAN flap disc 150x22,23mm width M grit 40 for steel/stainless steel - 67689072 cn: FLAP DISC cn2: FLAP DISC cn_clear: FLAPDISC d: Product description PFERD POLIFAN CURVE flap disc PFR 150x22.23 mm width M Z40 SGP STEELOX for steel/stainless steel Characteristics Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use The POLIFAN-CURVE flap disc has been specially developed for work on fillet welds It is the only flap disc in the world that has flaps on both the grinding side and on the rear side, as well as on the radius PFERD's POLIFAN CURVE is patented in many countries across the globe High-performance flap disc for maximum stock removal on steel and stainless steel (INOX) Advantages: Outstanding tool life when working on fillet welds and high stock removal rate, ensuring fast working and lower production costs. Excellent tool life when working on fillet welds. Precise and optimum grinding of the fillet weld geometry. ds: dsc: kts: POLIFAN flap disc 150x22,23mm width M grit 40 for steel/stainless steel kpn: PFR 150-M Z 40 SGP CURVE STEELOX kpn_dash: PFR 150 kpn_clear: PFR150MZ40SGPCURVESTEELOX bkpn: PFERD PFR 150-M Z 40 SGP CURVE STEELOX bkpn_clear: PFERD PFR150MZ40SGPCURVESTEELOX c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap disc | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Slat disc sr_no_br_cl_ns: 67689072 sr_ns: PFERD67689072
r: 08077643 p: 14.77 pid: 34145 b: PFERD q: 0 st: lt: 8 ean: 4007220807002 sr: PFERD 43218011 sr_no_br: 43218011 sr_no_br_cl: 43218011 sr_cl: PFERD43218011 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 12 mm Connection type (machine) Shank Material (brush filament) Steel wire Wire thickness 0,2 mm Twisted Yes Height 71 mm Connection size (machine) 6 mm n: PFERD PBGS 1210/6 ST 0,20 singletwist brush twisted Ø12 mm pin-Ø6 mm steel wire-Ø0.20 - 43218011 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD SINGLETWIST end brush knotted PBGS dia. 12 mm shank dia. 6 mm steel wire dia. 0.20 Characteristics Particularly flexible single-knot brush for special applications Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Optimal access to hard-to-reach areas such as inside corners, as the knot is less likely to unravel. Long tool life through use of PFERD special wire. ds: dsc: kts: singletwist brush twisted Ø12 mm pin-Ø6 mm steel wire-Ø0.20 kpn: PBGS 1210/6 ST 0,20 kpn_dash: kpn_clear: PBGS12106ST020 bkpn: PFERD PBGS 1210/6 ST 0,20 bkpn_clear: PFERD PBGS12106ST020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43218011 sr_ns: PFERD43218011
