Product description
- PFERD Aluminium oxide shop roll cloth SBR width 38 mm x length 25 m A240 for general use
Characteristics
- The cloth-backed variant is suitable for general, heavy-duty use on alloyed and non-alloyed steels, as well as non-ferrous metals
- The carton has a tear-off edge for separating the sections of abrasive belt at the workplace
Advantages:
- Highly flexible, enabling optimal adjustment to the contour.
- Little wear due to high tear strength and very good grain adhesion.
Key features according to our expert
-
Width: 38 mm
-
Length: 25 m
-
Grit size: 240
Specifications / All features
-
Brand:
PFERD
-
08078523
-
EAN:
4007220602102
-
Supplier number:
PFERD 45016424
- Width
- 38 mm
- Length
- 25 m
- Grit size
- 240
- Workable materials 10
- Nickel-based alloys (e.g. Inconel and Hastelloy)
- Workable materials 7
- Fibre-reinforced duroplastics (GRP, CFC)
- Workable materials 14
- Thermoplastics
- Workable materials 3
- Bronze
- Processing tasks 1
- Fine-tuning step by step
- ø shaft hole
- 75
- Workable materials 4
- Cast steel
- Workable materials 12
- Steel grades with hardness > 54 HRC
- Processing tasks 3
- Machining of surfaces
- Processing tasks
- Cleaning
- Workable materials 1
- Annealed cast iron
- Workable materials 5
- Cobalt-based alloys
- Workable materials 9
- Hardened, heat-treated steels above 1,200 N/mm² (< 38 HRC)
- Workable materials 16
- Titanium alloys
- Workable materials 8
- Grey/lamellar/nodular cast iron (GG/GJL, GGG/GJS)
- Width metric
- 38
- Length metric
- 25
- Workable materials 13
- Steel up to 1,200 N/mm² (< 38 HRC)
- Workable materials 17
- Zinc
- Workable materials 15
- Titanium
- Workable materials 11
- Stainless steel (INOX)
- Processing tasks 2
- Roughening
- Workable materials 2
- Brass
- Workable materials 6
- Copper
- Workable materials
- Aluminium
- Abrasive
- Corundum A
