pferd_43213001
pferd_43213001_2
pferd_43213001
pferd_43213001_2
PFERD

PFERD PBUR 2022/6 ST 0,20 brush with support ring unturned Ø 20 mm pin-Ø 6 mm steel wire-Ø 0.20 - 43213001

17.38 tax incl.
€14.36 excl. VAT (incl. all environmental contributions)
On order: delivered from 02/09/2026
each

The minimum purchase order quantity for the product is 10.

  • Delivery by DHL

Product description

  • PFERD End brush with bridle crimped PBUR dia. 20 mm shank dia. 6 mm steel wire dia. 0.20

Characteristics

  • Suitable for light brushing such as deburring, cleaning and derusting
  • Steel wire is the most common filament material
  • Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring
  • PFERD special wire has high tensile strength and bending fatigue strength
  • This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications
  • Steel wire withstands temperatures up to 300 °C

Advantages:

  • The bridle prevents the wires spreading out sideways.
  • The bridle enables the spreading out and flexibility of the brush filament to be strictly controlled.
  • Optimal access to hard-to-reach areas such as recesses and drilled holes.
  • If the filament has worn away down to the bridle, it can be removed from the bridle for further use. This does not affect the brushing behaviour.
  • Long tool life through use of PFERD special wire.
  • Creates fine surfaces.
Key features according to our expert
  • Brush diameter: 20 mm
  • Connection type (machine): Shank
  • Material (brush filament): Steel wire
  • Wire thickness: 0,2 mm
  • Twisted: No
  • Height: 70 mm
  • Connection size (machine): 6 mm
Specifications / All features
  • Brand: PFERD
  • EAN: 4007220530986
  • Supplier number: PFERD 43213001
Brush diameter
20 mm
Connection type (machine)
Shank
Material (brush filament)
Steel wire
Wire thickness
0,2 mm
Twisted
No
Height
70 mm
Connection size (machine)
6 mm
Filling material
Steel wire (ST)
Processing tasks
Cleaning
Processing tasks 3
Removing oxide layers
ø bowl
22
Length, trim
25
Processing tasks 1
Deburring
ø outside metric
20
Processing tasks 5
Roughening
Max. rpm
12500
Workable materials 1
Cast steel
Workable materials 3
Elastomer
Workable materials 7
Thermoplastics
ø topping material
0.2
Rpm, opt., to
9400
Grit size
unspecified
ø shaft metric
6
Workable materials 5
Steel grades with hardness > 54 HRC
Workable materials 6
Steel up to 1,200 N/mm² (< 38 HRC)
Workable materials
Cast iron
Workable materials 2
Duroplast
Workable materials 4
Steel, cast steel
Processing tasks 2
Derusting
Length, siege to ring
13
Recording system
Pin
Length, total
70
Processing tasks 4
Removal of lacquers
Workable materials 8
Wood
Rpm, opt., of
6300
Questions about this product?
Contact our customer service.
Call, mail or chat with us!

Viewed products

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.