r: 57991777 p: 21.43 pid: 38433 b: PFERD q: 0 st: lt: 15 ean: 4007220598061 sr: PFERD 43201011 sr_no_br: 43201011 sr_no_br_cl: 43201011 sr_cl: PFERD43201011 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 30 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,15 mm Twisted No Height 70 mm Connection size (machine) 6 mm n: PFERD PBU 3029/6 INOX 0,15 brush unturned Ø 30 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 - 43201011 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD End brush crimped PBU dia. 30 mm shank dia. 6 mm stainless steel wire dia. 0.15 Characteristics Suitable for light brushing such as deburring, cleaning and derusting End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. The plastic covering prevents the risk of corrosion. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: brush unturned Ø 30 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 kpn: PBU 3029/6 INOX 0,15 kpn_dash: kpn_clear: PBU30296INOX015 bkpn: PFERD PBU 3029/6 INOX 0,15 bkpn_clear: PFERD PBU30296INOX015 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43201011 sr_ns: PFERD43201011
r: 03194156 p: 21.35 pid: 66821 b: PFERD q: 0 st: lt: 8 ean: 4007220019948 sr: PFERD 62218300 sr_no_br: 62218300 sr_no_br_cl: 62218300 sr_cl: PFERD62218300 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 230 mm Bore size 22,2 mm Connection type (disc) Bore Shape (grinding disc) Depressed centre For material Stainless steel; Steel Thickness 7,2 mm n: PFERD E 230-7 CERAMIC SGP STEELOX grinding disc 230x7,2x22,23 mm performance line for steel/precious steel - 62218300 cn: GRINDING DISC cn2: GRINDING DISC cn_clear: GRINDINGDISC d: Product description PFERD Grinding wheel E 230x7.2x22.23 mm CERAMIC Performance Line SG STEELOX for steel/stainless steel Characteristics Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use High-performance grinding wheel with ceramic oxide grain for quick and economical grinding Advantages: The ultimate in aggressive performance and excellent tool life due to the self-sharpening effect of the ceramic oxide grain high-performance abrasive in connection with a special bond technology. Labour cost savings due to much faster work progress compared to conventional grinding wheels. Labour-saving work. ds: dsc: kts: grinding disc 230x7,2x22,23 mm performance line for steel/precious steel kpn: E 230-7 CERAMIC SGP STEELOX kpn_dash: E 230 kpn_clear: E2307CERAMICSGPSTEELOX bkpn: PFERD E 230-7 CERAMIC SGP STEELOX bkpn_clear: PFERD E2307CERAMICSGPSTEELOX c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding disc | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Grinding disc sr_no_br_cl_ns: 62218300 sr_ns: PFERD62218300
r: 08079763 p: 21.29 pid: 64561 b: PFERD q: 0 st: lt: 8 ean: 4007220776520 sr: PFERD 45011350 sr_no_br: 45011350 sr_no_br_cl: 45011350 sr_cl: PFERD45011350 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 30 mm Length 610 mm Grit size 100 n: PFERD 45011350 fleece grinding belt VB 30x610 mm A100 G for fine grinding & finishing with pipe grinder cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description PFERD Non-woven abrasive belt VB 30x610 mm A100 G for fine grinding and finishing with a pipe belt grinder Characteristics Suitable for general work on surfaces such as metal tubular structures, e.g. removing rough grinding traces, removing oxidation and light deburring work Achieve matt and satin-finished surfaces Short belts are compatible with commonly available belt grinders In ISO 2976, they are listed under the designation ""abrasive belts"" POLIVLIES grit size 100 G = coarse (yellow-brown) Advantages: High economic efficiency due to high abrasive performance and long tool life. High tear strength with optimum flexibility. Consistent results through very good grain adhesion. ds: dsc: kts: fleece grinding belt VB 30x610 mm A100 G for fine grinding & finishing with pipe grinder kpn: 45011350 kpn_dash: kpn_clear: 45011350 bkpn: PFERD 45011350 bkpn_clear: PFERD 45011350 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding belt | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding belt sr_no_br_cl_ns: 45011350 sr_ns: PFERD45011350
r: 08077671 p: 21.03 pid: 36827 b: PFERD q: 0 st: lt: 8 ean: 4007220033258 sr: PFERD 43209411 sr_no_br: 43209411 sr_no_br_cl: 43209411 sr_cl: PFERD43209411 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 18 mm Connection type (machine) Shank Material (brush filament) Plastic Wire thickness 0,5 mm Twisted No Height 45 mm Connection size (machine) 2,34 mm n: PFERD TBU 1803/2,34 AO 320 0,50 miniature bowl brush Ø 18 mm shank-Ø 2.34 mm aluminium oxide filament wire-Ø 0.50 mm grit 320 - 43209411 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD Miniature cup brush TBU dia. 18 mm shank dia. 2.34 mm aluminium oxide filament dia. 0.50 mm grit 320 Characteristics Suitable for light brushing such as deburring, cleaning and polishing Particularly suitable for brushing on small surfaces due to face-down use with the entire brush face applied to the workpiece PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with aluminium oxide (AO) are less sharp-edged and aggressive compared with SiC They are primarily suitable for polishing and smoothing finishes on soft metals Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Highly flexible, enabling optimal adjustment to the workpiece contour. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature bowl brush Ø 18 mm shank-Ø 2.34 mm aluminium oxide filament wire-Ø 0.50 mm grit 320 kpn: TBU 1803/2,34 AO 320 0,50 kpn_dash: kpn_clear: TBU1803234AO320050 bkpn: PFERD TBU 1803/2,34 AO 320 0,50 bkpn_clear: PFERD TBU1803234AO320050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43209411 sr_ns: PFERD43209411
r: 08077691 p: 21.03 pid: 35351 b: PFERD q: 0 st: lt: 8 ean: 4007220033463 sr: PFERD 43209455 sr_no_br: 43209455 sr_no_br_cl: 43209455 sr_cl: PFERD43209455 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 18 mm Connection type (machine) Shank Material (brush filament) Silicon carbide Wire thickness 0,25 mm Twisted No Height 45 mm Connection size (machine) 3 mm n: PFERD TBU 1803/3 SiC 800 0,25 miniature cup brush Ø 18 mm shank Ø 3 mm SiC filament wire Ø 0.25 grit 800 - 43209455 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD Miniature cup brush TBU dia. 18 mm shank dia. 3 mm SiC filament dia. 0.25 grit 800 Characteristics Suitable for light brushing such as deburring, cleaning and polishing Particularly suitable for brushing on small surfaces due to face-down use with the entire brush face applied to the workpiece PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Highly flexible, enabling optimal adjustment to the workpiece contour. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature cup brush Ø 18 mm shank Ø 3 mm SiC filament wire Ø 0.25 grit 800 kpn: TBU 1803/3 SiC 800 0,25 kpn_dash: kpn_clear: TBU18033SiC800025 bkpn: PFERD TBU 1803/3 SiC 800 0,25 bkpn_clear: PFERD TBU18033SiC800025 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43209455 sr_ns: PFERD43209455
r: 08077679 p: 21.03 pid: 34205 b: PFERD q: 0 st: lt: 8 ean: 4007220033272 sr: PFERD 43209405 sr_no_br: 43209405 sr_no_br_cl: 43209405 sr_cl: PFERD43209405 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 18 mm Connection type (machine) Shank Material (brush filament) Silicon carbide Wire thickness 0,25 mm Twisted No Height 45 mm Connection size (machine) 2,34 mm n: PFERD TBU 1803/2,34 SiC 800 0,25 miniature cup brush Ø 18 mm shank Ø 2.34 mm SiC filament wire Ø 0.25 grit 800 - 43209405 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD Miniature cup brush TBU dia. 18 mm shank dia. 2.34 mm SiC filament dia. 0.25 grit 800 Characteristics Suitable for light brushing such as deburring, cleaning and polishing Particularly suitable for brushing on small surfaces due to face-down use with the entire brush face applied to the workpiece PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Highly flexible, enabling optimal adjustment to the workpiece contour. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature cup brush Ø 18 mm shank Ø 2.34 mm SiC filament wire Ø 0.25 grit 800 kpn: TBU 1803/2,34 SiC 800 0,25 kpn_dash: kpn_clear: TBU1803234SiC800025 bkpn: PFERD TBU 1803/2,34 SiC 800 0,25 bkpn_clear: PFERD TBU1803234SiC800025 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43209405 sr_ns: PFERD43209405
r: 08077672 p: 21.03 pid: 34189 b: PFERD q: 0 st: lt: 8 ean: 4007220033241 sr: PFERD 43209410 sr_no_br: 43209410 sr_no_br_cl: 43209410 sr_cl: PFERD43209410 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 18 mm Connection type (machine) Shank Material (brush filament) Plastic Wire thickness 0,3 mm Twisted No Height 45 mm Connection size (machine) 2,34 mm n: PFERD TBU 1803/2,34 AO 600 0,30 miniature bowl brush Ø 18 mm shank-Ø 2.34 mm aluminium oxide filament wire-Ø 0.30 grit 600 - 43209410 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD Miniature cup brush TBU dia. 18 mm shank dia. 2.34 mm aluminium oxide filament dia. 0.30 grit 600 Characteristics Suitable for light brushing such as deburring, cleaning and polishing Particularly suitable for brushing on small surfaces due to face-down use with the entire brush face applied to the workpiece PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with aluminium oxide (AO) are less sharp-edged and aggressive compared with SiC They are primarily suitable for polishing and smoothing finishes on soft metals Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Highly flexible, enabling optimal adjustment to the workpiece contour. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature bowl brush Ø 18 mm shank-Ø 2.34 mm aluminium oxide filament wire-Ø 0.30 grit 600 kpn: TBU 1803/2,34 AO 600 0,30 kpn_dash: kpn_clear: TBU1803234AO600030 bkpn: PFERD TBU 1803/2,34 AO 600 0,30 bkpn_clear: PFERD TBU1803234AO600030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43209410 sr_ns: PFERD43209410
r: 08077682 p: 21.03 pid: 35062 b: PFERD q: 0 st: lt: 8 ean: 4007220033449 sr: PFERD 43209461 sr_no_br: 43209461 sr_no_br_cl: 43209461 sr_cl: PFERD43209461 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 18 mm Connection type (machine) Shank Material (brush filament) Plastic Wire thickness 0,5 mm Twisted No Height 45 mm Connection size (machine) 3 mm n: PFERD TBU 1803/3 AO 320 0,50 miniature bowl brush Ø 18 mm shank Ø 3 mm aluminium oxide filament wire Ø 0.50 mm grit 320 - 43209461 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD Miniature cup brush TBU dia. 18 mm shank dia. 3 mm aluminium oxide filament dia. 0.50 mm grit 320 Characteristics Suitable for light brushing such as deburring, cleaning and polishing Particularly suitable for brushing on small surfaces due to face-down use with the entire brush face applied to the workpiece PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with aluminium oxide (AO) are less sharp-edged and aggressive compared with SiC They are primarily suitable for polishing and smoothing finishes on soft metals Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Highly flexible, enabling optimal adjustment to the workpiece contour. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature bowl brush Ø 18 mm shank Ø 3 mm aluminium oxide filament wire Ø 0.50 mm grit 320 kpn: TBU 1803/3 AO 320 0,50 kpn_dash: kpn_clear: TBU18033AO320050 bkpn: PFERD TBU 1803/3 AO 320 0,50 bkpn_clear: PFERD TBU18033AO320050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43209461 sr_ns: PFERD43209461
r: 08077683 p: 21.03 pid: 35341 b: PFERD q: 0 st: lt: 8 ean: 4007220033432 sr: PFERD 43209460 sr_no_br: 43209460 sr_no_br_cl: 43209460 sr_cl: PFERD43209460 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 18 mm Connection type (machine) Shank Material (brush filament) Plastic Wire thickness 0,3 mm Twisted No Height 45 mm Connection size (machine) 3 mm n: PFERD TBU 1803/3 AO 600 0,30 miniature bowl brush Ø 18 mm shank Ø 3 mm aluminium oxide filament wire Ø 0.30 grit 600 - 43209460 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD Miniature cup brush TBU dia. 18 mm shank dia. 3 mm aluminium oxide filament dia. 0.30 grit 600 Characteristics Suitable for light brushing such as deburring, cleaning and polishing Particularly suitable for brushing on small surfaces due to face-down use with the entire brush face applied to the workpiece PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with aluminium oxide (AO) are less sharp-edged and aggressive compared with SiC They are primarily suitable for polishing and smoothing finishes on soft metals Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Highly flexible, enabling optimal adjustment to the workpiece contour. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature bowl brush Ø 18 mm shank Ø 3 mm aluminium oxide filament wire Ø 0.30 grit 600 kpn: TBU 1803/3 AO 600 0,30 kpn_dash: kpn_clear: TBU18033AO600030 bkpn: PFERD TBU 1803/3 AO 600 0,30 bkpn_clear: PFERD TBU18033AO600030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43209460 sr_ns: PFERD43209460
r: 08077678 p: 21.03 pid: 35058 b: PFERD q: 0 st: lt: 8 ean: 4007220033265 sr: PFERD 43209404 sr_no_br: 43209404 sr_no_br_cl: 43209404 sr_cl: PFERD43209404 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 18 mm Connection type (machine) Shank Material (brush filament) Silicon carbide Wire thickness 0,55 mm Twisted No Height 45 mm Connection size (machine) 2,34 mm n: PFERD TBU 1803/2,34 SiC 320 0,55 miniature bowl brush Ø 18 mm shank-Ø 2.34 mm SiC filament wire-Ø 0.55 mm grit 320 - 43209404 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD Miniature cup brush TBU dia. 18 mm shank dia. 2.34 mm SiC filament dia. 0.55 mm grit 320 Characteristics Suitable for light brushing such as deburring, cleaning and polishing Particularly suitable for brushing on small surfaces due to face-down use with the entire brush face applied to the workpiece PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Highly flexible, enabling optimal adjustment to the workpiece contour. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature bowl brush Ø 18 mm shank-Ø 2.34 mm SiC filament wire-Ø 0.55 mm grit 320 kpn: TBU 1803/2,34 SiC 320 0,55 kpn_dash: kpn_clear: TBU1803234SiC320055 bkpn: PFERD TBU 1803/2,34 SiC 320 0,55 bkpn_clear: PFERD TBU1803234SiC320055 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43209404 sr_ns: PFERD43209404
r: 08077690 p: 21.03 pid: 35349 b: PFERD q: 0 st: lt: 8 ean: 4007220033456 sr: PFERD 43209454 sr_no_br: 43209454 sr_no_br_cl: 43209454 sr_cl: PFERD43209454 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 18 mm Connection type (machine) Shank Material (brush filament) Silicon carbide Wire thickness 0,55 mm Twisted No Height 45 mm Connection size (machine) 3 mm n: PFERD TBU 1803/3 SiC 320 0,55 miniature cup brush Ø 18 mm shank Ø 3 mm SiC filament wire Ø 0.55 mm grit 320 - 43209454 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD Miniature cup brush TBU dia. 18 mm shank dia. 3 mm SiC filament dia. 0.55 mm grit 320 Characteristics Suitable for light brushing such as deburring, cleaning and polishing Particularly suitable for brushing on small surfaces due to face-down use with the entire brush face applied to the workpiece PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Highly flexible, enabling optimal adjustment to the workpiece contour. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature cup brush Ø 18 mm shank Ø 3 mm SiC filament wire Ø 0.55 mm grit 320 kpn: TBU 1803/3 SiC 320 0,55 kpn_dash: kpn_clear: TBU18033SiC320055 bkpn: PFERD TBU 1803/3 SiC 320 0,55 bkpn_clear: PFERD TBU18033SiC320055 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43209454 sr_ns: PFERD43209454
r: 51176680 p: 20.89 pid: 35603 b: PFERD q: 0 st: lt: 8 ean: 4007220059067 sr: PFERD 22420036 sr_no_br: 22420036 sr_no_br_cl: 22420036 sr_cl: PFERD22420036 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Shape (burr cutter) Sphere (D) Cutting length 7 mm Shank type Cylindrical Shank size (milling cutter) 6 mm n: PFERD HSS F 0807/6 Z3 HSS burr shape F 8x7mm 6mm universal medium-fine chip breaker - 22420036 cn: ROTARY BURR cn2: ROTARY BURR cn_clear: ROTARYBURR d: Product description PFERD HSS rotary cutter ball shape F dia. 08x07 mm shank dia. 6 mm Z 3 universal medium fine chip breaker Characteristics Cut 3 has chip breakers and is especially well-suited to machining of steel, cast steel and cast iron It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter Ball-shaped burr Advantages: Highly aggressive. Can be used at low rotational speeds. Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS). The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive. ds: dsc: kts: HSS burr shape F 8x7mm 6mm universal medium-fine chip breaker kpn: HSS F 0807/6 Z3 kpn_dash: kpn_clear: HSSF08076Z3 bkpn: PFERD HSS F 0807/6 Z3 bkpn_clear: PFERD HSSF08076Z3 c_path: Home / Tools / Machining tools / Cutting tools / Milling / Rotary burr | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd milling / Pferd rotary burr sr_no_br_cl_ns: 22420036 sr_ns: PFERD22420036
r: 51176629 p: 20.89 pid: 36036 b: PFERD q: 0 st: lt: 8 ean: 4007220058657 sr: PFERD 22405316 sr_no_br: 22405316 sr_no_br_cl: 22405316 sr_cl: PFERD22405316 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Shank size (milling cutter) 6 mm Shank type Cylindrical Shape (burr cutter) Cylindrical with end toothing (B) Cutting length 13 mm n: PFERD HSS A 1013ST/6 Z1 HSS burrs cylindrical head A-ST 10x13mm 6mm universal coarse - 22405316 cn: ROTARY BURR cn2: ROTARY BURR cn_clear: ROTARYBURR d: Product description PFERD HSS rotary cutter cylindrical shape end A-ST dia. 10x13 mm shank dia. 6 mm Z 1 universal coarse Characteristics Cut 1 is especially well suited for machining of stainless steel (INOX), soft non-ferrous metals and plastics It is used in a rotational speed range of 1,200 to 23,900 RPM, depending on the burr diameter Cylindrical burr with end cut Advantages: Highly aggressive. Can be used at low rotational speeds. Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS). The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive. ds: dsc: kts: HSS burrs cylindrical head A-ST 10x13mm 6mm universal coarse kpn: HSS A 1013ST/6 Z1 kpn_dash: kpn_clear: HSSA1013ST6Z1 bkpn: PFERD HSS A 1013ST/6 Z1 bkpn_clear: PFERD HSSA1013ST6Z1 c_path: Home / Tools / Machining tools / Cutting tools / Milling / Rotary burr | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd milling / Pferd rotary burr sr_no_br_cl_ns: 22405316 sr_ns: PFERD22405316
r: 51176630 p: 20.89 pid: 35308 b: PFERD q: 0 st: lt: 8 ean: 4007220058664 sr: PFERD 22405326 sr_no_br: 22405326 sr_no_br_cl: 22405326 sr_cl: PFERD22405326 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Cutting length 13 mm Shank size (milling cutter) 6 mm Shank type Cylindrical Shape (burr cutter) Cylindrical with end toothing (B) n: PFERD HSS A 1013ST/6 Z2 HSS burr cylindrical head A-ST 10x13mm 6mm universal medium chip breaker - 22405326 cn: ROTARY BURR cn2: ROTARY BURR cn_clear: ROTARYBURR d: Product description PFERD HSS rotary cutter cylindrical shape end A-ST dia. 10x13mm shank dia. 6mm Z 2 universal medium chip breaker Characteristics Cut 2 has chip breakers and is especially well-suited to machining of steel, cast steel and cast iron, stainless steel (INOX), non-ferrous metals and plastics It is used in a rotational speed range of 1,200 to 13,200 RPM, depending on the burr diameter Cylindrical burr with end cut Advantages: Highly aggressive. Can be used at low rotational speeds. Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS). The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive. ds: dsc: kts: HSS burr cylindrical head A-ST 10x13mm 6mm universal medium chip breaker kpn: HSS A 1013ST/6 Z2 kpn_dash: kpn_clear: HSSA1013ST6Z2 bkpn: PFERD HSS A 1013ST/6 Z2 bkpn_clear: PFERD HSSA1013ST6Z2 c_path: Home / Tools / Machining tools / Cutting tools / Milling / Rotary burr | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd milling / Pferd rotary burr sr_no_br_cl_ns: 22405326 sr_ns: PFERD22405326
r: 51176696 p: 20.89 pid: 36053 b: PFERD q: 0 st: lt: 8 ean: 4007220059241 sr: PFERD 22423326 sr_no_br: 22423326 sr_no_br_cl: 22423326 sr_cl: PFERD22423326 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Shape (burr cutter) Pointed cone (M) Cutting length 20 mm Shank type Cylindrical Shank size (milling cutter) 6 mm n: PFERD HSS G 1020/6 Z2 HSS burr pointed cone shape G 10x20mm 6mm universal medium chip breaker - 22423326 cn: ROTARY BURR cn2: ROTARY BURR cn_clear: ROTARYBURR d: Product description PFERD HSS rotary cutter conical pointed shape G dia. 10x20 mm shank dia. 6 mm Z 2 universal medium chip breaker Characteristics Cut 2 has chip breakers and is especially well-suited to machining of steel, cast steel and cast iron, stainless steel (INOX), non-ferrous metals and plastics It is used in a rotational speed range of 1,200 to 13,200 RPM, depending on the burr diameter Conical pointed burr, flattened tip Advantages: Highly aggressive. Can be used at low rotational speeds. Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS). The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive. ds: dsc: kts: HSS burr pointed cone shape G 10x20mm 6mm universal medium chip breaker kpn: HSS G 1020/6 Z2 kpn_dash: kpn_clear: HSSG10206Z2 bkpn: PFERD HSS G 1020/6 Z2 bkpn_clear: PFERD HSSG10206Z2 c_path: Home / Tools / Machining tools / Cutting tools / Milling / Rotary burr | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd milling / Pferd rotary burr sr_no_br_cl_ns: 22423326 sr_ns: PFERD22423326
r: 51183649 p: 20.88 pid: 121216 b: PFERD q: 0 st: lt: 8 ean: 4007220049730 sr: PFERD 21207683 sr_no_br: 21207683 sr_no_br_cl: 21207683 sr_cl: PFERD21207683 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Shape (burr cutter) Trapezium (N) Cutting length 7 mm Shank type Cylindrical Shank size (milling cutter) 3 mm n: PFERD WKNS 0607/3 Z3 PLUS tungsten carbide taper burr head 6x7mm 3mm universal medium with crosscutting - 21207683 cn: ROTARY BURR cn2: ROTARY BURR cn_clear: ROTARYBURR d: Product description PFERD Tungsten carbide inverted cone end cut WKNS dia. 06x07mm shank dia. 3mm Z3P universal medium cross cut Characteristics Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys It is characterized by its high stock removal rate Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing They provide a good stock removal rate and are not specific to a particular material Inverted cone-shaped rotary cutter, tapered towards the shank according to DIN 8032 with cut conforming to DIN 8033 Shape WKNS with end cut Suitable for work on hard-to-reach, reverse-side edges Due to their special shapes, tungsten carbide burrs for flexible work on edges achieve almost precise chamfers or radii and can also be used flexibly in hard-to-reach areas They are mainly used in steel and aluminium construction and have been specifically designed for chamfering, deburring and rounding of edges Advantages: Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating. Long tool life. The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive. High surface quality. ds: dsc: kts: tungsten carbide taper burr head 6x7mm 3mm universal medium with crosscutting kpn: WKNS 0607/3 Z3 PLUS kpn_dash: kpn_clear: WKNS06073Z3PLUS bkpn: PFERD WKNS 0607/3 Z3 PLUS bkpn_clear: PFERD WKNS06073Z3PLUS c_path: Home / Tools / Machining tools / Cutting tools / Milling / Rotary burr | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd milling / Pferd rotary burr sr_no_br_cl_ns: 21207683 sr_ns: PFERD21207683
