r: 51183694 p: 26.58 pid: 121251 b: PFERD q: 0 st: lt: 5 ean: 4007220045473 sr: PFERD 21101606 sr_no_br: 21101606 sr_no_br_cl: 21101606 sr_cl: PFERD21101606 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Shape (burr cutter) Cylindrical (A) Cutting length 16 mm Shank type Cylindrical Shank size (milling cutter) 6 mm n: PFERD ZYA 0616/6 Z3 carbide burr cylinder 6x16mm 6mm universal medium - 21101606 cn: ROTARY BURR cn2: ROTARY BURR cn_clear: ROTARYBURR d: Product description PFERD Tungsten carbide burr cylindrical ZYA dia. 06x16 mm shank dia. 6 mm Z3 universal medium Characteristics Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys It is characterized by its high stock removal rate and achieves a good surface Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing They provide a good stock removal rate and are not specific to a particular material Cylindrical burr according to DIN 8032 with cut conforming to DIN 8033 Advantages: Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating. Long tool life. The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive. High surface quality. ds: dsc: kts: carbide burr cylinder 6x16mm 6mm universal medium kpn: ZYA 0616/6 Z3 kpn_dash: kpn_clear: ZYA06166Z3 bkpn: PFERD ZYA 0616/6 Z3 bkpn_clear: PFERD ZYA06166Z3 c_path: Home / Tools / Machining tools / Cutting tools / Milling / Rotary burr | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd milling / Pferd rotary burr sr_no_br_cl_ns: 21101606 sr_ns: PFERD21101606
r: 51183695 p: 26.54 pid: 121252 b: PFERD q: 0 st: lt: 8 ean: 4007220045480 sr: PFERD 21101626 sr_no_br: 21101626 sr_no_br_cl: 21101626 sr_cl: PFERD21101626 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Shank size (milling cutter) 6 mm Shank type Cylindrical Shape (burr cutter) Cylindrical (A) Cutting length 16 mm n: PFERD ZYA 0616/6 Z3 PLUS Carbide burr cylinder 6x16mm 6mm universal medium with crosscut teeth - 21101626 cn: ROTARY BURR cn2: ROTARY BURR cn_clear: ROTARYBURR d: Product description PFERD Tungsten carbide burr cylindrical ZYA dia. 06x16 mm shank dia. 6 mm Z3P universal medium cross cut Characteristics Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys It is characterized by its high stock removal rate Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing They provide a good stock removal rate and are not specific to a particular material Cylindrical burr according to DIN 8032 with cut conforming to DIN 8033 Advantages: Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating. Long tool life. The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive. High surface quality. ds: dsc: kts: Carbide burr cylinder 6x16mm 6mm universal medium with crosscut teeth kpn: ZYA 0616/6 Z3 PLUS kpn_dash: kpn_clear: ZYA06166Z3PLUS bkpn: PFERD ZYA 0616/6 Z3 PLUS bkpn_clear: PFERD ZYA06166Z3PLUS c_path: Home / Tools / Machining tools / Cutting tools / Milling / Rotary burr | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd milling / Pferd rotary burr sr_no_br_cl_ns: 21101626 sr_ns: PFERD21101626
r: 08078355 p: 26.47 pid: 63910 b: PFERD q: 0 st: lt: 8 ean: 4007220416280 sr: PFERD 45005637 sr_no_br: 45005637 sr_no_br_cl: 45005637 sr_cl: PFERD45005637 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 50 mm Grit size 36 Length 2000 mm n: PFERD 45005637 grinding belt VICTOGRAIN-COOL BA 50x2000 mm A 36 for extremely high material removal with belt grinders cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description PFERD VICTOGRAIN-COOL abrasive belt BA 50x2000 mm A 36 for extremely high stock removal with a belt grinder Characteristics For maximum aggressive grinding with an extremely long tool life and an outstanding stock removal rate on steels and materials which are hard or have poor heat-conducting properties Outstanding, constant high performance thanks to the VICTOGRAIN abrasive grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding VICTOGRAIN products are some of the most effective grinding tools in the world The triangular, precision-formed abrasive grain from PFERD helps provide a uniquely high level of abrasive performance The VICTOGRAIN abrasive grit triangles are identical in shape and size and their cutting edges are applied to the workpiece at the optimum angle, meaning the grit needs very little energy to penetrate the workpiece The user thus benefits from an efficient machining process with fast work progress, a long tool life, a reduced influx of heat into the workpiece and a lower power output required for the tool drive ;The VICTOGRAIN abrasive triangles are fixed to the substrate on one of their sides This means they are securely fixed in place and, together with their slim design, offer an extremely large chip space in order to further improve machining efficiency The structure of the triangular VICTOGRAIN has also been specially adapted to maximize results The very small crystals inside the triangles ensure optimal wear characteristics as sharp cutting edges are always exposed, but only the minimum amount of abrasive grain/the triangle breaks off By combining all these properties together, users benefit from the ultimate, constant performance during cool grinding and an extremely long tool life together with consistent workpiece surface roughness Advantages: Efficient machining process with fast work progress, long tool life, less heat build-up in the workpiece, and a lower power output required for the tool drive thanks to VICTOGRAIN abrasive grain. High tear strength with optimum flexibility. Consistent results through very good grain adhesion. High economic efficiency due to high abrasive performance and long tool life. ds: dsc: kts: grinding belt VICTOGRAIN-COOL BA 50x2000 mm A 36 for extremely high material removal with belt grinders kpn: 45005637 kpn_dash: kpn_clear: 45005637 bkpn: PFERD 45005637 bkpn_clear: PFERD 45005637 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding belt | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding belt sr_no_br_cl_ns: 45005637 sr_ns: PFERD45005637
r: 03164340 p: 26.4 pid: 70580 b: PFERD q: 0 st: lt: 8 ean: 4007220955024 sr: PFERD 43303070 sr_no_br: 43303070 sr_no_br_cl: 43303070 sr_cl: PFERD43303070 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 125 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,5 mm Twisted Yes Thickness 12 mm Max. no-load speed 12500 rpm Connection size (machine) 22,2 mm n: PFERD 12512/22,2 CT ST 0,50 COMBITWIST round brush twisted RBG Ø 125 x 12 x 22.2 mm steel wire-Ø 0.50 mm angle grinder - 43303070 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMBITWIST wheel brush knotted RBG dia. 125x12x22.2 mm steel wire dia. 0.50 mm angle grinders (10) Characteristics Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Very aggressive brush Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams and removal of adhesive residues and spatter Advantages: Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: COMBITWIST round brush twisted RBG Ø 125 x 12 x 22.2 mm steel wire-Ø 0.50 mm angle grinder kpn: 12512/22,2 CT ST 0,50 kpn_dash: kpn_clear: 12512222CTST050 bkpn: PFERD 12512/22,2 CT ST 0,50 bkpn_clear: PFERD 12512222CTST050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43303070 sr_ns: PFERD43303070
r: 08077704 p: 26.37 pid: 34510 b: PFERD q: 0 st: lt: 8 ean: 4007220936603 sr: PFERD 43208021 sr_no_br: 43208021 sr_no_br_cl: 43208021 sr_cl: PFERD43208021 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 23 mm Connection type (machine) Shank Material (brush filament) Steel wire Wire thickness 0,25 mm Twisted Yes Height 68 mm Connection size (machine) 6 mm n: PFERD PBG 2323/6 ST 0,25 brush twisted Ø 23 mm pin-Ø 6 mm steel wire-Ø 0.25 - 43208021 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD End brush knotted PBG dia. 23 mm shank dia. 6 mm steel wire dia. 0.25 Characteristics Aggressive brush Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Optimal access to hard-to-reach areas such as recesses and drilled holes. Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: brush twisted Ø 23 mm pin-Ø 6 mm steel wire-Ø 0.25 kpn: PBG 2323/6 ST 0,25 kpn_dash: kpn_clear: PBG23236ST025 bkpn: PFERD PBG 2323/6 ST 0,25 bkpn_clear: PFERD PBG23236ST025 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43208021 sr_ns: PFERD43208021
r: 08079725 p: 26.36 pid: 67069 b: PFERD q: 0 st: lt: 8 ean: 4007220936139 sr: PFERD 44371115 sr_no_br: 44371115 sr_no_br_cl: 44371115 sr_cl: PFERD44371115 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 115 mm Thickness 22 mm n: PFERD 44371115 hard felt flap disc FFS 115mm bore 22,23mm for polishing work with angle grinder cn: POLISHING DISC cn2: POLISHING DISC cn_clear: POLISHINGDISC d: Product description PFERD Hard felt flap disc FFS dia. 115 mm hole 22.23 for polishing work with an angle grinder Characteristics Felt flap discs are used for pre-polishing and high-gloss polishing on medium-sized to large components Due to their hardness and flexibility, felt flap discs are used when the exact form of geometric shapes has to be maintained As a general rule, diamond polishing pastes and polishing paste bars are used for this Advantages: Highly flexible, enabling optimal adjustment to the contour. Can be profiled as desired, meaning they can also be used for tools with complex geometries. Low thermal load on the workpiece. ds: dsc: kts: hard felt flap disc FFS 115mm bore 22,23mm for polishing work with angle grinder kpn: 44371115 kpn_dash: kpn_clear: 44371115 bkpn: PFERD 44371115 bkpn_clear: PFERD 44371115 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Polishing disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd polishing disc | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Polishing disc sr_no_br_cl_ns: 44371115 sr_ns: PFERD44371115
r: 08079726 p: 26.36 pid: 67935 b: PFERD q: 0 st: lt: 8 ean: 4007220936085 sr: PFERD 44370115 sr_no_br: 44370115 sr_no_br_cl: 44370115 sr_cl: PFERD44370115 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 115 mm Thickness 22 mm n: PFERD 44370115 soft felt flap disc FFS 115mm bore 22,23 for polishing work with angle grinder cn: POLISHING DISC cn2: POLISHING DISC cn_clear: POLISHINGDISC d: Product description PFERD soft felt flap disc FFS dia. 115 mm hole 22.23 for polishing work with an angle grinder Characteristics Felt flap discs are used for pre-polishing and high-gloss polishing on medium-sized to large components Due to their hardness and flexibility, felt flap discs are used when the exact form of geometric shapes has to be maintained As a general rule, diamond polishing pastes and polishing paste bars are used for this Advantages: Highly flexible, enabling optimal adjustment to the contour. Can be profiled as desired, meaning they can also be used for tools with complex geometries. Low thermal load on the workpiece. ds: dsc: kts: soft felt flap disc FFS 115mm bore 22,23 for polishing work with angle grinder kpn: 44370115 kpn_dash: kpn_clear: 44370115 bkpn: PFERD 44370115 bkpn_clear: PFERD 44370115 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Polishing disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd polishing disc | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Polishing disc sr_no_br_cl_ns: 44370115 sr_ns: PFERD44370115
r: 04023340 p: 26.31 pid: 38476 b: PFERD q: 0 st: lt: 8 ean: 4007220806630 sr: PFERD 43104053 sr_no_br: 43104053 sr_no_br_cl: 43104053 sr_cl: PFERD43104053 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 70 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,2 mm Twisted No Thickness 4 mm Max. no-load speed 15000 rpm Connection size (machine) 6 mm n: PFERD 7004/6 INOX 0,20 round brush unturned RBU Ø 70 x 4 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 - 43104053 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush crimped RBU dia. 70x4 mm shank dia. 6 mm stainless steel wire dia. 0.20 Characteristics Generally suitable for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: round brush unturned RBU Ø 70 x 4 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 kpn: 7004/6 INOX 0,20 kpn_dash: kpn_clear: 70046INOX020 bkpn: PFERD 7004/6 INOX 0,20 bkpn_clear: PFERD 70046INOX020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43104053 sr_ns: PFERD43104053
r: 03235474 p: 26.31 pid: 121733 b: PFERD q: 0 st: lt: 8 ean: 4007220003909 sr: PFERD 21222773 sr_no_br: 21222773 sr_no_br_cl: 21222773 sr_cl: PFERD21222773 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Shank size (milling cutter) 3 mm Shank type Cylindrical Shape (burr cutter) Pointed arch (G) Cutting length 13 mm n: PFERD SPG 0613/3 MICRO tungsten carbide high-efficiency burrs pointed arc shape 6x13mm 3mm fine machining - 21222773 cn: ROTARY BURR cn2: ROTARY BURR cn_clear: ROTARYBURR d: Product description PFERD Tungsten carbide high-performance burr MICRO pointed tree SPG dia. 06x13 mm shank dia. 3 mm finishing Characteristics Tungsten carbide burrs with the MICRO cut are specifically designed for finishing and are used in areas in which mounted grinding points are used for example They offer a higher stock removal rate and produce a high surface quality, particularly compared with conventionally milled surfaces They also operate with low vibration and little noise They maintain their geometry over their entire tool life, and are well-suited to manual and machine applications Almost all materials up to a hardness of 68 HRC can be machined Pointed tree-shaped burr according to DIN 8032, flattened tip Advantages: High surface quality. Unlike with mounted grinding points, there is no change in geometry due to wear and tear. Use on almost all materials up to 68 HRC. The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive. ds: dsc: kts: tungsten carbide high-efficiency burrs pointed arc shape 6x13mm 3mm fine machining kpn: SPG 0613/3 MICRO kpn_dash: kpn_clear: SPG06133MICRO bkpn: PFERD SPG 0613/3 MICRO bkpn_clear: PFERD SPG06133MICRO c_path: Home / Tools / Machining tools / Cutting tools / Milling / Rotary burr | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd milling / Pferd rotary burr sr_no_br_cl_ns: 21222773 sr_ns: PFERD21222773
r: 03235068 p: 26.31 pid: 121676 b: PFERD q: 0 st: lt: 8 ean: 4007220067871 sr: PFERD 21215073 sr_no_br: 21215073 sr_no_br_cl: 21215073 sr_cl: PFERD21215073 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Shape (burr cutter) Pointed cone (M) Cutting length 13 mm Shank type Cylindrical Shank size (milling cutter) 3 mm n: PFERD SKM 0613/3 MICRO high-efficiency tungsten carbide burrs pointed cone shape 6x13mm 3mm fine machining - 21215073 cn: ROTARY BURR cn2: ROTARY BURR cn_clear: ROTARYBURR d: Product description PFERD Tungsten carbide high-performance burr MICRO conical pointed SKM dia. 06x13 mm shank dia. 3 mm finishing Characteristics Tungsten carbide burrs with the MICRO cut are specifically designed for finishing and are used in areas in which mounted grinding points are used for example They offer a higher stock removal rate and produce a high surface quality, particularly compared with conventionally milled surfaces They also operate with low vibration and little noise They maintain their geometry over their entire tool life, and are well-suited to manual and machine applications Almost all materials up to a hardness of 68 HRC can be machined Conical pointed burr according to DIN 8032, flattened tip Advantages: High surface quality. Unlike with mounted grinding points, there is no change in geometry due to wear and tear. Use on almost all materials up to 68 HRC. The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive. ds: dsc: kts: high-efficiency tungsten carbide burrs pointed cone shape 6x13mm 3mm fine machining kpn: SKM 0613/3 MICRO kpn_dash: kpn_clear: SKM06133MICRO bkpn: PFERD SKM 0613/3 MICRO bkpn_clear: PFERD SKM06133MICRO c_path: Home / Tools / Machining tools / Cutting tools / Milling / Rotary burr | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd milling / Pferd rotary burr sr_no_br_cl_ns: 21215073 sr_ns: PFERD21215073
r: 03235170 p: 26.29 pid: 120085 b: PFERD q: 0 st: lt: 8 ean: 4007220955338 sr: PFERD 21230073 sr_no_br: 21230073 sr_no_br_cl: 21230073 sr_cl: PFERD21230073 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Shape (burr cutter) Rounded arch (F) Cutting length 13 mm Shank type Cylindrical Shank size (milling cutter) 3 mm n: PFERD RBF 0613/3 MICRO tungsten carbide high-efficiency burr round bow shape 6x13mm 3mm fine machining - 21230073 cn: ROTARY BURR cn2: ROTARY BURR cn_clear: ROTARYBURR d: Product description PFERD Tungsten carbide high-performance burr MICRO tree shape with radius end RBF dia. 06x13 mm shank dia. 3 mm finishing Characteristics Tungsten carbide burrs with the MICRO cut are specifically designed for finishing and are used in areas in which mounted grinding points are used for example They offer a higher stock removal rate and produce a high surface quality, particularly compared with conventionally milled surfaces They also operate with low vibration and little noise They maintain their geometry over their entire tool life, and are well-suited to manual and machine applications Almost all materials up to a hardness of 68 HRC can be machined Tree-shaped burr with radius end according to DIN 8032 Advantages: High surface quality. Unlike with mounted grinding points, there is no change in geometry due to wear and tear. Use on almost all materials up to 68 HRC. The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive. ds: dsc: kts: tungsten carbide high-efficiency burr round bow shape 6x13mm 3mm fine machining kpn: RBF 0613/3 MICRO kpn_dash: kpn_clear: RBF06133MICRO bkpn: PFERD RBF 0613/3 MICRO bkpn_clear: PFERD RBF06133MICRO c_path: Home / Tools / Machining tools / Cutting tools / Milling / Rotary burr | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd milling / Pferd rotary burr sr_no_br_cl_ns: 21230073 sr_ns: PFERD21230073
r: 51180651 p: 26.22 pid: 121793 b: PFERD q: 0 st: lt: 8 ean: 4007220046791 sr: PFERD 21112026 sr_no_br: 21112026 sr_no_br_cl: 21112026 sr_cl: PFERD21112026 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 4 mm Shank size (milling cutter) 6 mm Shank type Cylindrical Shape (burr cutter) Sphere (D) Cutting length 3,6 mm n: PFERD KUD 0403/6 Z3 PLUS carbide burr ball shape 4x3mm 6mm universal medium with crosscutting - 21112026 cn: ROTARY BURR cn2: ROTARY BURR cn_clear: ROTARYBURR d: Product description PFERD Tungsten carbide burr ball KUD dia. 04x03 mm shank dia. 6 mm Z3P universal medium cross cut Characteristics Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys It is characterized by its high stock removal rate Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing They provide a good stock removal rate and are not specific to a particular material Ball-shaped burr according to DIN 8032 with cut conforming to DIN 8033 Advantages: Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating. Long tool life. The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive. High surface quality. ds: dsc: kts: carbide burr ball shape 4x3mm 6mm universal medium with crosscutting kpn: KUD 0403/6 Z3 PLUS kpn_dash: kpn_clear: KUD04036Z3PLUS bkpn: PFERD KUD 0403/6 Z3 PLUS bkpn_clear: PFERD KUD04036Z3PLUS c_path: Home / Tools / Machining tools / Cutting tools / Milling / Rotary burr | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd milling / Pferd rotary burr sr_no_br_cl_ns: 21112026 sr_ns: PFERD21112026
r: 51183754 p: 26.22 pid: 120503 b: PFERD q: 0 st: lt: 8 ean: 4007220046807 sr: PFERD 21112056 sr_no_br: 21112056 sr_no_br_cl: 21112056 sr_cl: PFERD21112056 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 4 mm Shape (burr cutter) Sphere (D) Cutting length 3 mm Shank type Cylindrical Shank size (milling cutter) 6 mm n: PFERD KUD 0403/6 Z5 carbide burr ball shape 4x3mm 6mm universal fine - 21112056 cn: ROTARY BURR cn2: ROTARY BURR cn_clear: ROTARYBURR d: Product description PFERD Tungsten carbide burr ball KUD dia. 04x03 mm shank dia. 6 mm Z5 universal fine Characteristics Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys It achieves a good surface Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing They provide a good stock removal rate and are not specific to a particular material Ball-shaped burr according to DIN 8032 with cut conforming to DIN 8033 Due to their special shapes, tungsten carbide burrs for flexible work on edges achieve almost precise chamfers or radii and can also be used flexibly in hard-to-reach areas They are mainly used in steel and aluminium construction and have been specifically designed for chamfering, deburring and rounding of edges Advantages: Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating. Long tool life. The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive. High surface quality. ds: dsc: kts: carbide burr ball shape 4x3mm 6mm universal fine kpn: KUD 0403/6 Z5 kpn_dash: kpn_clear: KUD04036Z5 bkpn: PFERD KUD 0403/6 Z5 bkpn_clear: PFERD KUD04036Z5 c_path: Home / Tools / Machining tools / Cutting tools / Milling / Rotary burr | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd milling / Pferd rotary burr sr_no_br_cl_ns: 21112056 sr_ns: PFERD21112056
r: 03206574 p: 26.15 pid: 33963 b: PFERD q: 0 st: lt: 8 ean: 4007220023723 sr: PFERD 47802826 sr_no_br: 47802826 sr_no_br_cl: 47802826 sr_cl: PFERD47802826 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 125 mm Grit size 320 Connection size (machine) 5/8" Connection type (machine) Bore Width 20 mm n: PFERD FR WS 12520 5/8-11 A 320 flap wheel for angle grinder 125x20 mm, 320 grit universal application - 47802826 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD flap grinding wheel for angle grinders FR WS dia. 125x20mm 5/8-11 A320 general use Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" The ideal tool for use on angle grinders in assembly shop operations For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. Can be mounted directly on the angle grinder without additional clamping devices. ds: dsc: kts: flap wheel for angle grinder 125x20 mm, 320 grit universal application kpn: FR WS 12520 5/8-11 A 320 kpn_dash: FR WS 12520 5/8 kpn_clear: FRWS125205811A320 bkpn: PFERD FR WS 12520 5/8-11 A 320 bkpn_clear: PFERD FRWS125205811A320 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 47802826 sr_ns: PFERD47802826
r: 03206572 p: 26.15 pid: 32426 b: PFERD q: 0 st: lt: 8 ean: 4007220023716 sr: PFERD 47802825 sr_no_br: 47802825 sr_no_br_cl: 47802825 sr_cl: PFERD47802825 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 125 mm Grit size 240 Connection size (machine) 5/8" Connection type (machine) Bore Width 20 mm n: PFERD FR WS 12520 5/8-11 A 240 flap wheel for angle grinder 125x20 mm, grain 240 universal application - 47802825 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD flap grinding wheel for angle grinders FR WS dia. 125x20mm 5/8-11 A240 general use Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" The ideal tool for use on angle grinders in assembly shop operations For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. Can be mounted directly on the angle grinder without additional clamping devices. ds: dsc: kts: flap wheel for angle grinder 125x20 mm, grain 240 universal application kpn: FR WS 12520 5/8-11 A 240 kpn_dash: FR WS 12520 5/8 kpn_clear: FRWS125205811A240 bkpn: PFERD FR WS 12520 5/8-11 A 240 bkpn_clear: PFERD FRWS125205811A240 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 47802825 sr_ns: PFERD47802825
r: 03206525 p: 26.15 pid: 32326 b: PFERD q: 0 st: lt: 8 ean: 4007220023662 sr: PFERD 44782532 sr_no_br: 44782532 sr_no_br_cl: 44782532 sr_cl: PFERD44782532 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 125 mm Grit size 320 Connection size (machine) M14 Connection type (machine) Internal thread Thread type Metric Width 20 mm n: PFERD FR WS 12520 M14 A 320 flap wheel for angle grinder 125x20 mm, 320 grit universal application - 44782532 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD flap grinding wheel for angle grinders FR WS dia. 125x20mm M14 A320 general use Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" The ideal tool for use on angle grinders in assembly shop operations For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. Can be mounted directly on the angle grinder without additional clamping devices. ds: dsc: kts: flap wheel for angle grinder 125x20 mm, 320 grit universal application kpn: FR WS 12520 M14 A 320 kpn_dash: kpn_clear: FRWS12520M14A320 bkpn: PFERD FR WS 12520 M14 A 320 bkpn_clear: PFERD FRWS12520M14A320 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44782532 sr_ns: PFERD44782532
r: 03160854 p: 26.15 pid: 69382 b: PFERD q: 0 st: lt: 5 ean: 4007220579114 sr: PFERD 43211003 sr_no_br: 43211003 sr_no_br_cl: 43211003 sr_cl: PFERD43211003 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 60 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,3 mm Twisted No Height 85 mm Connection size (machine) 6 mm n: PFERD TBU 6015/6 INOX 0,30 cup brush unturned Ø 60 mm pin-Ø 6 mm stainless steel wire-Ø 0.30 - 43211003 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD Cup brush crimped TBU dia. 60 mm shank dia. 6 mm stainless steel wire dia. 0.30 Characteristics Generally suitable for cleaning, derusting and smoothing, as well as removal of corrosion and paint Particularly suitable for brushing on large, flat and easily accessible surfaces due to face-down use with the entire brush face applied to the workpiece In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Cup brush with plastic-covered brush body Advantages: Low risk of contaminating the workpiece. Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: cup brush unturned Ø 60 mm pin-Ø 6 mm stainless steel wire-Ø 0.30 kpn: TBU 6015/6 INOX 0,30 kpn_dash: kpn_clear: TBU60156INOX030 bkpn: PFERD TBU 6015/6 INOX 0,30 bkpn_clear: PFERD TBU60156INOX030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43211003 sr_ns: PFERD43211003
