Product description
- PFERD Tube brush IBU dia. 8.2x25 mm shank dia. 2.9 mm aluminium oxide filament dia. 0.30 grit 600
Characteristics
- For light deburring, cleaning of holes and cross holes and for work on surfaces
- Brushes with aluminium oxide (AO) are less sharp-edged and aggressive compared with SiC
- They are primarily suitable for polishing and smoothing finishes on soft metals
- Plastic filament withstands temperatures up to 220 °C
Advantages:
- Enable maximum precision and efficiency in work on delicate workpieces.
- Highly flexible, enabling optimal adjustment to the workpiece contour.
- The dimensional accuracy of the workpieces remains unchanged.
- With tube brushes with a short eyelet, the filament reaches up to the tip of the brush.
- The bent end of the wire does not have any sharp edges, which prevents delicate surfaces from getting scratched.
- Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Key features according to our expert
-
Diameter: 8,2 mm
-
Brush length: 25 mm
-
Material (brush wire): Plastic
-
Connection size (machine): 2,9 mm
-
Connection type (machine): Shank
-
Thread type: Not applicable
-
Pipe brush version: On marker
-
Wire thickness: 0,3 mm
-
Overall length: 125 mm
Specifications / All features
-
Brand:
PFERD
-
08077881
-
EAN:
4007220037270
-
Supplier number:
PFERD 43679618
- Diameter
- 8,2 mm
- Brush length
- 25 mm
- Material (brush wire)
- Plastic
- Connection size (machine)
- 2,9 mm
- Connection type (machine)
- Shank
- Thread type
- Not applicable
- Pipe brush version
- On marker
- Wire thickness
- 0,3 mm
- Overall length
- 125 mm
- Processing tasks 1
- Deburring
- Workable materials 1
- Bronze
- Grit size
- 600
- Processing tasks
- Cleaning
- Workable materials 7
- Steel grades with hardness > 54 HRC
- Filling material
- Aluminium oxide (AO)
- Max. rpm
- 2000
- ø outside metric
- 8.2
- Workable materials 3
- Cast steel
- Workable materials 4
- Cobalt-based alloys
- Workable materials 5
- Other non-ferrous metals
- Workable materials 2
- Cast iron
- Width metric
- 25
- Workable materials 8
- Steel up to 1,200 N/mm² (< 38 HRC)
- ø shaft metric
- 2.9
- Length, total
- 125
- Recording system
- Pin
- Workable materials 6
- Steel, cast steel
- Workable materials
- Aluminium
- ø topping material
- 0.3
