PFERD 45005104 corundum grinding belt BA 25x480 mm A40 for universal use with belt grinder

This product has been discontinued.

Product information

Product description

PFERD aluminium oxide abrasive belt BA 25x480mm A40 for general use with a belt grinder

Characteristics

For general applications from coarse to fine grinding
Short belts are compatible with commonly available belt grinders
In ISO 2976, they are listed under the designation ""abrasive belts""

Advantages:

High tear strength with optimum flexibility.
Consistent results through very good grain adhesion.
High economic efficiency due to high abrasive performance and long tool life.

Key features according to our expert

Width: 25 mm
Length: 480 mm
Grit size: 40

Specifications / All features

Brand: PFERD
08078281
EAN: 4007220585634
Supplier number: PFERD 45005104

Width: 25 mm
Length: 480 mm
Grit size: 40
Workable materials 12: Steel grades with hardness > 54 HRC
Workable materials 9: Hardened, heat-treated steels above 1,200 N/mm² (< 38 HRC)
Workable materials 5: Cobalt-based alloys
Workable materials 1: Annealed cast iron
Processing tasks: Deburring
Processing tasks 3: Sharps
Workable materials 16: Titanium alloys
Abrasive: Corundum A
Workable materials 4: Cast steel
Processing tasks 5: Edge processing
Workable materials 3: Bronze
Workable materials 14: Thermoplastics
Workable materials 7: Fibre-reinforced duroplastics (GRP, CFC)
Workable materials 10: Nickel-based alloys (e.g. Inconel and Hastelloy)
Processing tasks 1: Fine-tuning step by step
Workable materials 8: Grey/lamellar/nodular cast iron (GG/GJL, GGG/GJS)
Width metric: 25
Workable materials 6: Copper
Workable materials: Aluminium
Workable materials 2: Brass
Length metric: 480
Processing tasks 2: Levelling
Workable materials 11: Stainless steel (INOX)
Workable materials 15: Titanium
Processing tasks 4: welding
Workable materials 17: Zinc
Workable materials 13: Steel up to 1,200 N/mm² (< 38 HRC)
Complies with iso: ISO 2976