Product description
- PFERD Compact grain abrasive belt BA 100x282 mm A800 CK for fine grinding for drum dia. 90x100 mm
Characteristics
- Outstandingly suited to fine and very fine grinding, and for step-by-step preparations for polishing
- The self-sharpening compact grain facilitates a very long tool life and achieves consistent surface quality levels throughout the entire tool life
- Short belts are compatible with commonly available belt grinders
- In ISO 2976, they are listed under the designation ""abrasive belts""
Advantages:
- High tear strength with optimum flexibility.
- Consistent results through very good grain adhesion.
- High economic efficiency due to high abrasive performance and long tool life.
- The rubber tube of the grinding drum yields under higher contact pressure, which helps to reduce the influx of heat and wear on the abrasive belts.
Key features according to our expert
-
Width: 100 mm
-
Length: 282 mm
-
Grit size: 800
Specifications / All features
-
Brand:
PFERD
-
08078171
-
EAN:
4007220149881
-
Supplier number:
PFERD 45001170
- Width
- 100 mm
- Length
- 282 mm
- Grit size
- 800
- Workable materials 9
- Hardened, heat-treated steels above 1,200 N/mm² (< 38 HRC)
- Workable materials 5
- Cobalt-based alloys
- Workable materials 1
- Annealed cast iron
- Processing tasks
- Deburring
- Processing tasks 3
- Sharps
- Workable materials 16
- Titanium alloys
- Workable materials 12
- Steel grades with hardness > 54 HRC
- Processing tasks 1
- Fine-tuning step by step
- Processing tasks 5
- Edge processing
- Workable materials 3
- Bronze
- Workable materials 14
- Thermoplastics
- Workable materials 7
- Fibre-reinforced duroplastics (GRP, CFC)
- Workable materials 10
- Nickel-based alloys (e.g. Inconel and Hastelloy)
- Workable materials 4
- Cast steel
- Workable materials 8
- Grey/lamellar/nodular cast iron (GG/GJL, GGG/GJS)
- Width metric
- 100
- Workable materials 6
- Copper
- Workable materials
- Aluminium
- Workable materials 2
- Brass
- Length metric
- 282
- Processing tasks 2
- Levelling
- Workable materials 11
- Stainless steel (INOX)
- Workable materials 15
- Titanium
- Processing tasks 4
- welding
- Workable materials 17
- Zinc
- Workable materials 13
- Steel up to 1,200 N/mm² (< 38 HRC)
- Abrasive
- Corundum A-COMPACT CORREL
