PFERD 44691631 POLINOX pressed fleece wheel PNER Ø 150x6 mm bore-Ø 25.4 mm soft SIC fine for finishing

Name: PFERD 44691631 POLINOX pressed fleece wheel PNER Ø 150x6 mm bore-Ø 25.4 mm soft SIC fine for finishing
Brand: PFERD
SKU: 08079150
Price: 30.72 EUR
Availability: PreOrder

From 5 piece €30.72

From 10 pieces €27.65 - €30.72 saving

From 15 pieces €26.11 - €69.12 saving

30.72 tax incl.

€25.39 excl. VAT (incl. all environmental contributions)

PFERD 44691631 POLINOX pressed fleece wheel PNER Ø 150x6 mm bore-Ø 25.4 mm soft SIC fine for finishing

€30.72

On order: delivered from 26/05/2026

each

The minimum purchase order quantity for the product is 5.

Delivery by DHL

Product information

Product description

PFERD POLINOX pressed non-woven wheel PNER dia. 150x6 mm centre hole dia. 25.4 mm soft SIC fine for finishing

Characteristics

POLINOX unitized wheels PNER consist of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system
The different combinations of compression, fibres, grain and the appropriate bond results in non-woven products that offer a very good surface finish, high stock removal rate and long tool life
These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing
The version for angle grinders and fillet weld grinders is particularly suitable for working on fillet welds and hard-to-reach slots and indentations
Soft version with excellent adaptability
The durability, grinding performance and very high surface quality are maintained at the same time
Very well-suited to work on contours

Advantages:

High economic efficiency due to high abrasive performance and long tool life.
Produces very good surface quality.
Can be profiled as desired, enabling optimal adjustment to the contour.

Key features according to our expert

Diameter: 150 mm
Bore size: 25,4 mm
Width: 6 mm
Grit size: Fine

Specifications / All features

Brand: PFERD
08079150
EAN: 4007220895740
Supplier number: PFERD 44691631

Diameter: 150 mm
Bore size: 25,4 mm
Width: 6 mm
Grit size: Fine
Processing tasks 1: Deburring
Workable materials 1: Brass
Processing tasks: Cleaning
Processing tasks 3: Roughening
Workable materials 12: Thermoplastics
ø shaft hole: 25.4
Processing tasks 5: Machining of surfaces
Abrasive: Silicon carbide SiC/C
Workable materials 5: Copper
ø outside metric: 150
Workable materials 3: Cast steel
Workable materials 14: Titanium alloys
Workable materials 7: Hardened, heat-treated steels above 1,200 N/mm² (< 38 HRC)
Workable materials 10: Steel grades with hardness > 54 HRC
Max. rpm: 5100
Workable materials 4: Cobalt-based alloys
Workable materials 9: Stainless steel (INOX)
Workable materials 6: Fibre-reinforced duroplastics (GRP, CFC)
Workable materials: Aluminium
Workable materials 2: Bronze
Width metric: 6
Processing tasks 2: Fine-tuning step by step
Workable materials 11: Steel up to 1,200 N/mm² (< 38 HRC)
Workable materials 15: Zinc
Processing tasks 4: Texturing (matting, seamless matting and satin)
Workable materials 13: Titanium
Workable materials 8: Nickel-based alloys (e.g. Inconel and Hastelloy)
Rpm, opt.: 3800