Product description
- PFERD POLINOX pressed non-woven wheel PNER dia. 150x25 mm centre hole dia. 25.4 mm medium-soft A fine for finishing
Characteristics
- POLINOX unitized wheels PNER consist of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system
- The different combinations of compression, fibres, grain and the appropriate bond results in non-woven products that offer a very good surface finish, high stock removal rate and long tool life
- These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing
- The version for straight grinders, flexible shafts and bench grinders is particularly suitable for working on smaller surfaces
- Medium-hard version with increased edge strength and tool life for coarse blending and polishing tasks
- Well-suited for working on edges
- An adapter is included with the 150 x 25 mm diameter grinding wheels, which allows the centre hole diameter to be reduced from 25,4 mm to 20 mm
Advantages:
- High economic efficiency due to high abrasive performance and long tool life.
- Produces very good surface quality.
- Can be profiled as desired, enabling optimal adjustment to the contour.
