pferd_43509003
pferd_43509003_2
pferd_43509003_3
pferd_43509003
pferd_43509003_2
pferd_43509003_3
PFERD

PFERD 43509003 roller brush WBU 100x100x19.1mm unturned for satin-finishing machines, with arbor hole stainless steel wire-Ø 0.20

282.78 tax incl.
€233.70 excl. VAT (incl. all environmental contributions)
On order: delivered from 29/08/2026
each

  • Delivery by DHL

Product description

  • PFERD Wheel brush WBU dia. 100x100x19.1 mm hole stainless steel wire dia 0.20 burnishing machine

Characteristics

  • Excellent for surface structuring work on workpieces with large surfaces
  • In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes
  • Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life
  • All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A
  • The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i
  • E
  • It can be attracted using magnets
  • ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process)
  • This does not have any impact on the quality and corrosion resistance of the INOX filament
  • The filament is still resistant to corrosion
  • Stainless steel wire (INOX) withstands temperatures up to 450 °C

Advantages:

  • Can be used with all commercially available burnishing machines thanks to the hole with four keyways.
  • Very good corrosion resistance.
  • Creates fine surfaces.
Key features according to our expert
  • Diameter: 100 mm
  • Twisted: No
  • Width: 100 mm
  • Material (brush filament): Stainless steel
  • Bore size: 19,1 mm
Specifications / All features
  • Brand: PFERD
  • EAN: 4007220773079
  • Supplier number: PFERD 43509003
Diameter
100 mm
Twisted
No
Width
100 mm
Material (brush filament)
Stainless steel
Bore size
19,1 mm
Workable materials 1
Bronze
Processing tasks
Cleaning
Processing tasks 3
Removal of run-on colours
ø shaft hole
19.1
Length, trim
26
Processing tasks 1
Deburring
Filling material
Stainless steel wire (INOX)
Processing tasks 5
Removal of lacquers
Max. rpm
6000
Workable materials 5
Nickel-based alloys (e.g. Inconel and Hastelloy)
Workable materials 3
Non-ferrous metal hard
Workable materials 7
Other non-ferrous metals
Workable materials 10
Titanium
ø topping material
0.2
Rpm, opt., to
3900
ø outside metric
100
Width metric
100
Workable materials 9
Stainless steel (INOX)
Workable materials 6
Nickel- or titanium-based superalloys
Workable materials
Aluminium
Workable materials 2
Cobalt-based alloys
Workable materials 4
Heat-resistant materials
Processing tasks 2
Derusting
Processing tasks 6
Roughening
Workable materials 11
Titanium alloys
Recording system
Shaft hole
Processing tasks 4
Removing oxide layers
Processing tasks 7
Texturing (matting, seamless matting and satin)
Workable materials 8
soft titanium alloys (tensile strength 500 N/mm²)
Rpm, opt., of
2400
Questions about this product?
Contact our customer service.
Call, mail or chat with us!

Viewed products

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.