PFERD 42772703 COMBIDISC aluminium oxide CDR Ø 75 mm A36 COOL for stainless steel

This product has been discontinued.

Product information

Product description

PFERD COMBIDISC aluminium oxide abrasive disc CDR dia. 75 mm A36 COOL for stainless steel

Characteristics

For general applications from coarse to fine grinding on materials with challenging stock removal properties, e.g. stainless steel (INOX)
Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding
The CDR clamping system has a threaded connection with male thread (plastic) on the tool side
Also suitable for the following commonly used systems: Roloc, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On

Advantages:

High economic efficiency as tool can be changed quickly.
Very comfortable due to ease of use and low-vibration working.
No disruptions in use due to adhesion, slipping or coming loose.

Key features according to our expert

(Disc) diameter: 75 mm
(Disc) attachment: CDR system
Bore size: Not applicable
Perforated: No
For material: Stainless steel; Non-ferrous metal
Grit size: 36

Specifications / All features

Brand: PFERD
08078885
EAN: 4007220596807
Supplier number: PFERD 42772703

(disc) diameter: 75 mm
(disc) attachment: CDR system
Bore size: Not applicable
Perforated: No
For material: Stainless steel; Non-ferrous metal
Grit size: 36
Processing tasks 1: Fine-tuning step by step
Workable materials 1: Brass
Processing tasks: Deburring
Processing tasks 3: Roughening
Workable materials 12: Titanium
Workable materials 3: Cast steel
Processing tasks 5: Machining of surfaces
ø outside metric: 75
Workable materials 9: Steel grades with hardness > 54 HRC
Workable materials 7: Hardened, heat-treated steels above 1,200 N/mm² (< 38 HRC)
Workable materials 10: Steel up to 1,200 N/mm² (< 38 HRC)
Rpm, opt., to: 9000
Rpm, opt., of: 5000
Workable materials 5: Fibre-reinforced duroplastics (GRP, CFC)
Workable materials 13: Titanium alloys
Workable materials 4: Copper
Workable materials 6: Grey/lamellar/nodular cast iron (GG/GJL, GGG/GJS)
Workable materials: Annealed cast iron
Workable materials 2: Bronze
Workable materials 8: Stainless steel (INOX)
Clamping system: System CDR
Processing tasks 2: Levelling
Processing tasks 6: welding
Workable materials 11: Thermoplastics
Processing tasks 4: Sharps
Processing tasks 7: Edge processing
Abrasive: Corundum A-COOL