PFERD 42762508 COMBIDISC corundum textile discs CD Ø 50 mm A80TX for stainless steel and aluminium

This product has been discontinued.

Product information

Product description

PFERD COMBIDISC aluminium oxide textile discs CD dia. 50mm A80TX for stainless steel and aluminium

Characteristics

For achieving fine, matt surface finishes in one process
The very sturdy granular bond facilitates very aggressive abrasive performance
Particularly suitable for work on stainless steel (INOX) and aluminium
The CD clamping system has a threaded connection with female thread (metal/plastic) on the tool side
Also suitable for the following commonly used systems: PSG, Power Lock Type II ""turn on"", SocAtt, Turn-On

Advantages:

High economic efficiency as tool can be changed quickly.
Very comfortable due to ease of use and low-vibration working.
No disruptions in use due to adhesion, slipping or coming loose.

Key features according to our expert

(Disc) diameter: 50 mm
(Disc) attachment: CD system
Bore size: Not applicable
Perforated: No
For material: Steel; Stainless steel; Non-ferrous metal
Grit size: 80

Specifications / All features

Brand: PFERD
57990198
EAN: 4007220505731
Supplier number: PFERD 42762508

(disc) diameter: 50 mm
(disc) attachment: CD system
Bore size: Not applicable
Perforated: No
For material: Steel; Stainless steel; Non-ferrous metal
Grit size: 80
Workable materials 12: Titanium
Workable materials 5: Fibre-reinforced duroplastics (GRP, CFC)
Workable materials 1: Brass
Processing tasks: Deburring
Processing tasks 3: Roughening
Workable materials 3: Cast steel
Processing tasks 1: Fine-tuning step by step
Processing tasks 5: Machining of surfaces
ø outside metric: 50
Workable materials 4: Copper
Workable materials 7: Hardened, heat-treated steels above 1,200 N/mm² (< 38 HRC)
Workable materials 10: Steel up to 1,200 N/mm² (< 38 HRC)
Rpm, opt., to: 9500
Rpm, opt., of: 7500
Workable materials 9: Steel grades with hardness > 54 HRC
Binding: TX
Workable materials 8: Stainless steel (INOX)
Workable materials 6: Grey/lamellar/nodular cast iron (GG/GJL, GGG/GJS)
Workable materials: Annealed cast iron
Workable materials 2: Bronze
Processing tasks 7: Edge processing
Clamping system: System CD
Processing tasks 2: Levelling
Processing tasks 6: welding
Workable materials 11: Thermoplastics
Processing tasks 4: Sharps
Workable materials 13: Titanium alloys
Abrasive: Corundum A