Product description
- PFERD COMBIDISC pressed non-woven disc CD PNER dia. 50mm medium-hard SIC fine for finishing
Characteristics
- For achieving a very fine, uniform surface finish which, depending on requirements, is a sufficient preparation for high-gloss polishing
- Particularly suitable for work on small and medium-sized surfaces on stainless steel (INOX) components
- The CD clamping system has a threaded connection with female thread (metal/plastic) on the tool side
- Also suitable for the following commonly used systems: PSG, Power Lock Type II ""turn on"", SocAtt, Turn-On
Advantages:
- High economic efficiency as tool can be changed quickly.
- Very comfortable due to ease of use and low-vibration working.
- No disruptions in use due to adhesion, slipping or coming loose.
Key features according to our expert
-
(Disc) diameter: 50 mm
-
Thickness: 6 mm
-
(Disc) attachment: CD system
-
Bore size: Not applicable
-
Perforated: No
-
For material: Steel; Stainless steel; Non-ferrous metal
-
Grit size: Fine
Specifications / All features
-
Brand:
PFERD
-
08078859
-
EAN:
4007220832790
-
Supplier number:
PFERD 42759104
- (disc) diameter
- 50 mm
- Thickness
- 6 mm
- (disc) attachment
- CD system
- Bore size
- Not applicable
- Perforated
- No
- For material
- Steel; Stainless steel; Non-ferrous metal
- Grit size
- Fine
- Processing tasks 1
- Deburring
- Workable materials 1
- Brass
- Processing tasks
- Cleaning
- Processing tasks 3
- Roughening
- Workable materials 12
- Thermoplastics
- Workable materials 3
- Cast steel
- Processing tasks 5
- Machining of surfaces
- Max. rpm
- 19100
- ø outside metric
- 50
- Workable materials 9
- Stainless steel (INOX)
- Workable materials 14
- Titanium alloys
- Workable materials 7
- Hardened, heat-treated steels above 1,200 N/mm² (< 38 HRC)
- Workable materials 10
- Steel grades with hardness > 54 HRC
- Abrasive
- Silicon carbide SiC/C
- Workable materials 5
- Copper
- Workable materials 13
- Titanium
- Workable materials 4
- Cobalt-based alloys
- Workable materials 6
- Fibre-reinforced duroplastics (GRP, CFC)
- Workable materials
- Aluminium
- Workable materials 2
- Bronze
- Width metric
- 6
- Clamping system
- System CD
- Processing tasks 2
- Fine-tuning step by step
- Processing tasks 6
- welding
- Workable materials 11
- Steel up to 1,200 N/mm² (< 38 HRC)
- Processing tasks 4
- Texturing (matting, seamless matting and satin)
- Workable materials 8
- Nickel-based alloys (e.g. Inconel and Hastelloy)
- Rpm, opt.
- 9500
