pferd_42758008
pferd_42758008_2
pferd_42758008_3
pferd_42758008_4
pferd_42758008
pferd_42758008_2
pferd_42758008_3
pferd_42758008_4
PFERD

PFERD 42758008 COMBIDISC diamond abrasive disc CDR Ø 50 mm D126/P 120 for titanium, glass, GRP and stone

27.24 tax incl.
€22.51 excl. VAT (incl. all environmental contributions)
On order: delivered from 10/07/2026
each

The minimum purchase order quantity for the product is 10.

  • Delivery by DHL

Product description

  • PFERD COMBIDISC diamond abrasive disc CDR dia. 50mm D126/P 120 for titanium, glass, GRP and stone

Characteristics

  • Exceptionally suitable for work on wear-resistant coatings and for hard facings made of tungsten carbide, chromium carbide, titanium carbide, etc
  • Particularly recommended for work on materials used for aircraft engine construction and for working on extremely hard materials
  • Grit size according to ISO 6344: P 120
  • The CDR clamping system has a threaded connection with male thread (plastic) on the tool side
  • Also suitable for the following commonly used systems: Roloc, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On

Advantages:

  • High economic efficiency as tool can be changed quickly.
  • Very comfortable due to ease of use and low-vibration working.
  • No disruptions in use due to adhesion, slipping or coming loose.
Key features according to our expert
  • (Disc) diameter: 50 mm
  • (Disc) attachment: CDR system
  • Bore size: Not applicable
  • Perforated: No
  • For material: Steel; Stainless steel; Non-ferrous metal
  • Grit size: 120
Specifications / All features
  • Brand: PFERD
  • EAN: 4007220750490
  • Supplier number: PFERD 42758008
(disc) diameter
50 mm
(disc) attachment
CDR system
Bore size
Not applicable
Perforated
No
For material
Steel; Stainless steel; Non-ferrous metal
Grit size
120
Processing tasks 3
Roughening
Workable materials 1
Fibre-reinforced duroplastics (GRP, CFC)
Processing tasks
Deburring
Workable materials 3
Stone
Processing tasks 1
Fine-tuning step by step
Processing tasks 5
Machining of surfaces
ø outside metric
50
Workable materials 4
Thermoplastics
Rpm, opt., to
7500
Rpm, opt., of
3800
Workable materials 5
Titanium
Processing tasks 2
Levelling
Processing tasks 7
Edge processing
Processing tasks 4
Sharps
Processing tasks 6
welding
Clamping system
System CDR
Workable materials 2
Nickel-based alloys (e.g. Inconel and Hastelloy)
Workable materials 6
Titanium alloys
Workable materials
Cobalt-based alloys
Abrasive
Diamond
Questions about this product?
Contact our customer service.
Call, mail or chat with us!

Viewed products

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.