Product description
- PFERD POS wheel brush wide crimped RBU dia. 250x30xvariable hole stainless steel wire dia. 0.30 bench grinder
Characteristics
- Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces
- In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes
- Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life
- All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A
- The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i
- E
- It can be attracted using magnets
- ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process)
- This does not have any impact on the quality and corrosion resistance of the INOX filament
- The filament is still resistant to corrosion
- Stainless steel wire (INOX) withstands temperatures up to 450 °C
- Developed for general use in the workshop
Advantages:
- Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter.
- Highly flexible, enabling optimal adjustment to the workpiece contour.
- Very good corrosion resistance.
- Creates fine surfaces.
Key features according to our expert
-
Brush diameter: 250 mm
-
Connection type (machine): Bore
-
Material (brush filament): Stainless steel
-
Wire thickness: 0,3 mm
-
Twisted: No
-
Thickness: 30 mm
-
Max. no-load speed: 3600 rpm
-
Connection size (machine): 50,8 mm
Specifications / All features
-
Brand:
PFERD
-
08078063
-
EAN:
4007220224311
-
Supplier number:
PFERD 43740133
- Brush diameter
- 250 mm
- Connection type (machine)
- Bore
- Material (brush filament)
- Stainless steel
- Wire thickness
- 0,3 mm
- Twisted
- No
- Thickness
- 30 mm
- Max. no-load speed
- 3600 rpm
- Connection size (machine)
- 50,8 mm
- Filling material
- Stainless steel wire (INOX)
- Processing tasks
- Cleaning
- Processing tasks 3
- Removal of run-on colours
- ø shaft hole included in set
- AK 32-2
- ø shaft hole
- 31.8
- Length, trim
- 46
- Processing tasks 1
- Deburring
- Workable materials 3
- Non-ferrous metal hard
- Processing tasks 5
- Removal of lacquers
- Max. rpm
- 3600
- ø outside metric
- 250
- Workable materials 1
- Bronze
- Workable materials 7
- Other non-ferrous metals
- Workable materials 10
- Titanium
- ø topping material
- 0.3
- Rpm, opt., to
- 2300
- Grit size
- unspecified
- Workable materials 8
- soft titanium alloys (tensile strength 500 N/mm²)
- Workable materials 5
- Nickel-based alloys (e.g. Inconel and Hastelloy)
- Workable materials 2
- Cobalt-based alloys
- Workable materials
- Aluminium
- Workable materials 6
- Nickel- or titanium-based superalloys
- Processing tasks 2
- Derusting
- Workable materials 9
- Stainless steel (INOX)
- Processing tasks 6
- Roughening
- Workable materials 11
- Titanium alloys
- Recording system
- Shaft hole
- ø shaft hole, max.
- 50.8
- Processing tasks 4
- Removing oxide layers
- Width metric
- 30
- Workable materials 4
- Heat-resistant materials
- Rpm, opt., of
- 1400
