Product description
- PFERD Tungsten carbide burr set 1506 cut 3 PLUS 5-piece shank dia. 6 mm univ. medium cross cut
Characteristics
- Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys
- It is characterized by its high stock removal rate
- Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing
- They provide a good stock removal rate and are not specific to a particular material
- Set 1506 - cut 3 PLUS - contains five tungsten carbide burrs in the most common shapes and dimensions for applications in the workshop
- The sturdy plastic box protects the tools from dirt and damage
- The burrs are secured at the shanks, facilitating the selection and withdrawal of the tools
- Five further unused slots are available for other burrs
Advantages:
- Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
- Long tool life.
- The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
- High surface quality.