Product description
- PFERD Wheel brush knotted RBG dia. 200x16x50.8 mm hole steel wire dia. 0.35 mm stationary
Characteristics
- Steel wire is the most common filament material
- Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring
- PFERD special wire has high tensile strength and bending fatigue strength
- This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications
- Steel wire withstands temperatures up to 300 °C
- Aggressive and robust brush that is able to withstand high mechanical loads
- Suitable for all heavy-duty stationary and automated brushing, e.g. deburring work
Advantages:
- Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter.
- Aggressive brushing effect due to the very stiff wire knots.
- Long tool life through use of PFERD special wire.
Key features according to our expert
-
Brush diameter: 200 mm
-
Connection type (machine): Bore
-
Material (brush filament): Steel wire
-
Wire thickness: 0,35 mm
-
Twisted: Yes
-
Thickness: 16 mm
-
Max. no-load speed: 8500 rpm
-
Connection size (machine): 50,8 mm
Specifications / All features
-
Brand:
PFERD
-
08077951
-
EAN:
4007220956540
-
Supplier number:
PFERD 43310010
- Brush diameter
- 200 mm
- Connection type (machine)
- Bore
- Material (brush filament)
- Steel wire
- Wire thickness
- 0,35 mm
- Twisted
- Yes
- Thickness
- 16 mm
- Max. no-load speed
- 8500 rpm
- Connection size (machine)
- 50,8 mm
- Processing tasks 1
- Deburring
- Processing tasks
- Cleaning
- Processing tasks 3
- Oxidation removal
- ø shaft hole
- 50.8
- Length, trim
- 44
- ø outside metric
- 200
- Filling material
- Steel wire (ST)
- Processing tasks 5
- Removal of lacquers
- Max. rpm
- 8500
- Number, threaded ends
- 34
- Workable materials 3
- Steel grades with hardness > 54 HRC
- ø topping material
- 0.35
- Rpm, opt., to
- 6500
- Workable materials 1
- Cast steel
- Processing tasks 4
- Removing oxide layers
- Workable materials 4
- Steel up to 1,200 N/mm² (< 38 HRC)
- Width metric
- 16
- Processing tasks 7
- welding
- Processing tasks 8
- Corner seam machining
- Recording system
- Shaft hole
- Processing tasks 6
- V-seam machining
- Processing tasks 2
- Derusting
- Workable materials 2
- Steel, cast steel
- Workable materials
- Cast iron
- Rpm, opt., of
- 4000
