pferd_43505930
PFERD

PFERD 20013/50,8 CO 120 1,10 round brush unturned RBU Ø 200 x 13 x 50.8 mm arbor hole ker. filament wire-Ø 1.10 mm grit 120 stat. - 43505930

132.42 tax incl.
€109.44 excl. VAT (incl. all environmental contributions)
On order: delivered from 31/08/2026
each

  • Delivery by DHL

Product description

  • PFERD Wheel brush crimped RBU dia. 200x13x50.8 mm hole ceramic filament dia. 1.10 mm grit 120 stationary

Characteristics

  • Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness
  • For high stock removal values and aggressive brushing behaviour
  • Plastic filament withstands temperatures up to 220 °C
  • Ideal for processing aluminium due to the longer trim length and higher degree of flexibility
  • Suitable for use on stationary machines, automated centres and robots

Advantages:

  • For particularly aggressive machining and for giving the workpiece a high surface quality.
  • The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved.
  • Highly flexible, enabling optimal adjustment to the workpiece contour.
  • Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Key features according to our expert
  • Brush diameter: 200 mm
  • Connection type (machine): Bore
  • Material (brush filament): Plastic
  • Wire thickness: 1,1 mm
  • Twisted: No
  • Thickness: 13 mm
  • Max. no-load speed: 6000 rpm
  • Connection size (machine): 50,8 mm
Specifications / All features
  • Brand: PFERD
  • EAN: 4007220837290
  • Supplier number: PFERD 43505930
Brush diameter
200 mm
Connection type (machine)
Bore
Material (brush filament)
Plastic
Wire thickness
1,1 mm
Twisted
No
Thickness
13 mm
Max. no-load speed
6000 rpm
Connection size (machine)
50,8 mm
Filling material
Ceramic grit (CO)
Processing tasks
Cleaning
Workable materials 12
Steel grades with hardness > 54 HRC
ø shaft hole
50.8
Length, trim
46
Processing tasks 1
Deburring
Workable materials 14
Titanium
Max. rpm
6000
ø outside metric
200
Workable materials 3
Cast steel
Workable materials 1
Bronze
Workable materials 7
Nickel-based alloys (e.g. Inconel and Hastelloy)
Workable materials 10
soft titanium alloys (tensile strength 500 N/mm²)
ø topping material
1.1
Rpm, opt., to
3900
Grit size
120
Workable materials 8
Nickel- or titanium-based superalloys
Workable materials 5
Non-ferrous metal hard
Workable materials 6
Heat-resistant materials
Workable materials
Aluminium
Workable materials 2
Cast iron
Workable materials 9
Other non-ferrous metals
Processing tasks 2
Texturing (matting, seamless matting and satin)
Workable materials 11
Steel, cast steel
Workable materials 15
Titanium alloys
Recording system
Shaft hole
Workable materials 13
Steel up to 1,200 N/mm² (< 38 HRC)
Width metric
13
Workable materials 4
Cobalt-based alloys
Rpm, opt., of
2400
Questions about this product?
Contact our customer service.
Call, mail or chat with us!

Viewed products

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.