pferd_43505009
PFERD

PFERD 15016/12,0 CO 120 1,10 round brush narrow untied RBU Ø 150 x 16 mm variable arbor hole ker. filament wire-Ø 1.10 mm grit 120 - 43505009

70.19 tax incl.
€58.01 excl. VAT (incl. all environmental contributions)
On order: delivered from 01/09/2026
each

The minimum purchase order quantity for the product is 2.

  • Delivery by DHL

Product description

  • PFERD wheel brush slim crimped RBU dia. 150x16xvariable hole ceramic filament dia. 1.10mm grit 120

Characteristics

  • Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness
  • For high stock removal values and aggressive brushing behaviour
  • Plastic filament withstands temperatures up to 220 °C
  • Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces

Advantages:

  • Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter.
  • The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved.
  • Highly flexible, enabling optimal adjustment to the workpiece contour.
  • Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Key features according to our expert
  • Brush diameter: 150 mm
  • Connection type (machine): Bore
  • Material (brush filament): Plastic
  • Wire thickness: 1,1 mm
  • Twisted: No
  • Thickness: 16 mm
  • Max. no-load speed: 6000 rpm
  • Connection size (machine): 12 mm
Specifications / All features
  • Brand: PFERD
  • EAN: 4007220837276
  • Supplier number: PFERD 43505009
Brush diameter
150 mm
Connection type (machine)
Bore
Material (brush filament)
Plastic
Wire thickness
1,1 mm
Twisted
No
Thickness
16 mm
Max. no-load speed
6000 rpm
Connection size (machine)
12 mm
Filling material
Ceramic grit (CO)
Grit size
120
Processing tasks
Cleaning
Workable materials 12
Steel grades with hardness > 54 HRC
ø shaft hole
12
Length, trim
28
Processing tasks 1
Deburring
Workable materials 14
Titanium
Max. rpm
6000
ø outside metric
150
Workable materials 3
Cast steel
Workable materials 5
Non-ferrous metal hard
Workable materials 7
Nickel-based alloys (e.g. Inconel and Hastelloy)
Workable materials 10
soft titanium alloys (tensile strength 500 N/mm²)
ø topping material
1.1
Rpm, opt., to
3900
Workable materials 1
Bronze
Workable materials 8
Nickel- or titanium-based superalloys
Workable materials 9
Other non-ferrous metals
Workable materials 6
Heat-resistant materials
Workable materials
Aluminium
Workable materials 2
Cast iron
Workable materials 4
Cobalt-based alloys
Processing tasks 2
Texturing (matting, seamless matting and satin)
Workable materials 11
Steel, cast steel
Workable materials 15
Titanium alloys
Recording system
Shaft hole
ø shaft hole, max.
31.8
Workable materials 13
Steel up to 1,200 N/mm² (< 38 HRC)
Width metric
16
Rpm, opt., of
2400
Questions about this product?
Contact our customer service.
Call, mail or chat with us!

Viewed products

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.