- Accessory/Part type: Cimp jaw set
Milwaukee jaws for 12V press tools and crimping kits for M18 HCCT
Milwaukee press jaws and crimping dies are the interchangeable parts that give your press tool or cable crimper the right profile. They belong to the Milwaukee M12 and M18 batteries, chargers and attachments.
For a 12V press tool, choose the jaw by profile and diameter. The profile follows the fitting system you install: M, V, U or TH. In the type name, the letter gives the profile and the number the pipe diameter, for example J12-M15 for a 15 mm M profile or J12-TH32 for a 32 mm TH profile. Check which system the maker of your fittings specifies, because a jaw with the wrong profile will not give a sealed press.
The range also includes the RJA-1 ring adapter.
For cable lugs there are crimping kits for the M18 HCCT hydraulic cable crimper on 18V, with eleven dies per kit, in a DIN22 and an R22 version for copper lugs. Choose the series that matches the standard of the cable lugs you use.
- Accessory/Part type: Cimp jaw set