r: 02884533 p: 22.975 pid: 118902 b: MILWAUKEE q: 0 st: lt: 7 ean: 4002395315215 sr: MILWAUKEE 4932343278 sr_no_br: 4932343278 sr_no_br_cl: 4932343278 sr_cl: MILWAUKEE4932343278 sr_dash: sold: 45.95 p_range: none type: standard act: 1 avo: 1 av: Diameter 22 mm Cutting length 30 mm Connection profile Weldon For material Metal n: MILWAUKEE 4932343278 HSS round cutter 30 mm HSSAC 22 x 30 cn: ANNULAR CUTTER cn2: ANNULAR CUTTER cn_clear: ANNULARCUTTER d: Product description 100% Faster - Speed and time savings are achieved due to the following factors. Firstly the annular cutter principle of only cutting material from the periphery of the hole as opposed to the twist drill which must cut the complete diameter of the hole. Secondly the benefit of two aggressive sharp angles per cutting edge help to achieve faster feed rates and lower cutting resistance. 30% More productivity - Because the annular cutter is only cutting material from the periphery of the hole. Less motor energy and driving power is required. The larger the drill diameter the greater the energy saving. Longer lifetime - The annular cutters cutting edges do less work than the twist drill resulting in more holes between sharpening. Thick 6 mm body together with special tooth geo-metry ensures high stability and reduces to a minimum the risk of breakage due to overloading. Thick walled HSS annular cutters for increased durability and life time. With standard 19 mm Weldon reception. 30 mm depth of cut. ds: dsc: kts: HSS round cutter 30 mm HSSAC 22 x 30 kpn: 4932343278 kpn_dash: kpn_clear: 4932343278 bkpn: MILWAUKEE 4932343278 bkpn_clear: MILWAUKEE 4932343278 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Annular cutter | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee cutting tools / Milwaukee drilling and punching / Milwaukee annular cutter sr_no_br_cl_ns: 4932343278 sr_ns: MILWAUKEE4932343278
r: 02879944 p: 22.975 pid: 119917 b: MILWAUKEE q: 0 st: lt: 7 ean: 4002395344031 sr: MILWAUKEE 4932371704 sr_no_br: 4932371704 sr_no_br_cl: 4932371704 sr_cl: MILWAUKEE4932371704 sr_dash: sold: 45.95 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Drill bit type Hammer drill bit Overall length 110 mm Shank type SDS-plus Material (drill bit) Carbide tip Number of cutting edges 2 ea Quantity per blister 10 Cutting length 50 mm n: MILWAUKEE 4932371704 SDS-Plus M2 hammer drill 2-spiral 6x110mm (10 pcs) cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Breaker Points. 3 offset aggressive power breakers. These produce a "Demolition" effect and create micro cracks in the drilled material. Up to 25% FASTER Centering tip. Ensures immediate spot drilling with pin point accuracy. Prevents skidding on smooth surfaces Enlarged rebar chamfers. Prevents side tip damage when hitting rebar. Reduces the risk of the drill bit jamming when hitting rebar Tapered shoulder design. Thinner shoulder towards drill tip for less friction providing for greater speed. Ideal for cordless hammers identified from its tapered shoulder geometry Reinforced flute. High volume flute geometry for optimum dust removal. Reinforced flute design (thicker core) gives: - Full power transfer to the tip. - Lower vibrations. - Exceptional break resistance, less breakages and best durability Made in Germany FASTEST: New aggressive tip geometry with 3 chip breakers demolishes the concrete quicker and a tapered shoulder design minimises friction enabling the M2 drill bit to deliver faster drilling speed DURABILITY: Rebar chamfers on the tip prevent side tip damage when hitting metal reinforcement and a thicker core body ensures higher power transfer, lower vibrations and less flute breakages ds: dsc: kts: SDS-Plus M2 hammer drill 2-spiral 6x110mm (10 pcs) kpn: 4932371704 kpn_dash: kpn_clear: 4932371704 bkpn: MILWAUKEE 4932371704 bkpn_clear: MILWAUKEE 4932371704 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee cutting tools / Milwaukee drilling and punching / Milwaukee drill bit sr_no_br_cl_ns: 4932371704 sr_ns: MILWAUKEE4932371704
r: 08069384 p: 22.975 pid: 89313 b: MILWAUKEE q: 0 st: lt: 8 ean: 4058546344573 sr: MILWAUKEE 4932478280 sr_no_br: 4932478280 sr_no_br_cl: 4932478280 sr_cl: MILWAUKEE4932478280 sr_dash: sold: 45.95 p_range: none type: standard act: 1 avo: 1 av: Diameter 35 mm n: MILWAUKEE 4932478280 diamond tile drill bit M14 35mm cn: DIAMOND DRILL BIT cn2: DIAMOND DRILL BIT cn_clear: DIAMONDDRILLBIT d: Product description Diamond Max M14 dry drills and holesaws are designed for drilling holes in extremely hard materials such as porcelain/gres/quarry tiles, cast iron or fibreglass. These bits and holesaws guarantee superior life and fastest cutting even in the hardest of materials. M14 thread to fit directly onto an angle grinder or with relevant adaptors to fit spot polisher and die grinder. Dry use. No cooling needed. Clean holes: Drills clean, precise holes without any perimeter scratches. Superior lifetime and durability due to the high grade diamond bond and the tough alloy body which resists bending under stress. Easy slug removal due to the multiple access slots. Sizes available: 5mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 30mm, 32mm, 35mm, 38mm, 40mm, 44mm, 51mm, 54mm, 55mm, 57mm, 60mm, 64mm, 65mm, 68mm, 73mm, 75mm, 76mm, 83mm, 102mm. Sets available: 3pc, 4pc. Adaptors available: M9, M16. ds: dsc: kts: diamond tile drill bit M14 35mm kpn: 4932478280 kpn_dash: kpn_clear: 4932478280 bkpn: MILWAUKEE 4932478280 bkpn_clear: MILWAUKEE 4932478280 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Diamond drill bit | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee cutting tools / Milwaukee drilling and punching / Milwaukee diamond drill bit sr_no_br_cl_ns: 4932478280 sr_ns: MILWAUKEE4932478280
r: 08069309 p: 45.785 pid: 87317 b: MILWAUKEE q: 0 st: lt: 10 ean: 4058546368456 sr: MILWAUKEE 4932479051 sr_no_br: 4932479051 sr_no_br_cl: 4932479051 sr_cl: MILWAUKEE4932479051 sr_dash: sold: 45.785 p_range: none type: standard act: 1 avo: 1 av: Diameter (hole saw) 60 mm n: MILWAUKEE 4932479051 TCT stainless steel hole saw 60 mm cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description Carbide tooth technology provides for best performance, speed and 10x more lifetime than standard bi-metal holesaws. Teeth can also be resharpened. Extra deep 25 mm cutting depth for drilling in sheet material and pipes. One solid piece holesaw design reduces wobble and vibration for accurate drilling. Safety stop collar prevents over drilling for best safety. Ejector spring helps eject the slug, prevents jamming and saves time. With 3-flat secure grip shank reception to prevent the holesaw slipping in the chuck and to ensure maximum torque transmission. Diameters 16-76 mm with 10 mm and >80 mm with 13 mm 3-flat shank reception. Replaceable pilot drill and spring. Use a cooling lubricant to extend the life of the holesaw. For metals use cutting oil, aluminium turpentine, plastics water and for cast iron drill dry. Suitable for drilling steel ( ds: dsc: kts: TCT stainless steel hole saw 60 mm kpn: 4932479051 kpn_dash: kpn_clear: 4932479051 bkpn: MILWAUKEE 4932479051 bkpn_clear: MILWAUKEE 4932479051 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee cutting tools / Milwaukee sawing and cutting / Milwaukee hole saw sr_no_br_cl_ns: 4932479051 sr_ns: MILWAUKEE4932479051
r: 02882743 p: 11.25 pid: 119330 b: MILWAUKEE q: 0 st: lt: 5 ean: 4002395349173 sr: MILWAUKEE 4932373332 sr_no_br: 4932373332 sr_no_br_cl: 4932373332 sr_cl: MILWAUKEE4932373332 sr_dash: sold: 45 p_range: none type: standard act: 1 avo: 1 av: Diameter 1 mm Drill bit type Metal drill bit Overall length 34 mm Shank size 1 mm Shank type Cylindrical Material (drill bit) HSS-E Co 5% Standard DIN 338 Number of cutting edges 2 ea Quantity per blister 10 Cutting length 12 mm n: MILWAUKEE 4932373332 HSS-G Cobalt metal drill bit 1x34mm (10 pcs) cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bits ground from solid, extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338. Suitable for drilling high alloy content steels and metals with tensile strengths over 1000 N/mm² like stainless steel. QUAD EDGE Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster. Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability. 3-flat shank from Ø 5 mm for better grip and prevents chuck slippage. Colour: bronze. ds: dsc: kts: HSS-G Cobalt metal drill bit 1x34mm (10 pcs) kpn: 4932373332 kpn_dash: kpn_clear: 4932373332 bkpn: MILWAUKEE 4932373332 bkpn_clear: MILWAUKEE 4932373332 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee cutting tools / Milwaukee drilling and punching / Milwaukee drill bit sr_no_br_cl_ns: 4932373332 sr_ns: MILWAUKEE4932373332
r: 02883845 p: 8.925 pid: 119504 b: MILWAUKEE q: 0 st: lt: 7 ean: 4002395331871 sr: MILWAUKEE 4932363675 sr_no_br: 4932363675 sr_no_br_cl: 4932363675 sr_cl: MILWAUKEE4932363675 sr_dash: sold: 44.625 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Drill bit type Formwork drill bit Overall length 600 mm Shank size 10 mm Shank type Cylindrical Material (drill bit) HSS Standard DIN 7490 Number of cutting edges 2 ea Cutting length 500 mm n: MILWAUKEE 4932363675 HSS formwork drill bit 10x600mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Manufactured from HSS steel for increased lifetime. Suitable for drilling through holes in wood, plasterboard and metal channel. Manufactured according to DIN 7490 and conforming to the German Employer´s Liability Insurance Association in terms of safety requirements for the building trade. The body of the drill bit is attached to the cylindrical shank by means of a thread, therefore eliminating the risk of breakage and guaranteeing absolute concentricity. The small twist angle and enlarged flutes ensure rapid and clog-free chip removal. Made in Germany. ds: dsc: kts: HSS formwork drill bit 10x600mm kpn: 4932363675 kpn_dash: kpn_clear: 4932363675 bkpn: MILWAUKEE 4932363675 bkpn_clear: MILWAUKEE 4932363675 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee cutting tools / Milwaukee drilling and punching / Milwaukee drill bit sr_no_br_cl_ns: 4932363675 sr_ns: MILWAUKEE4932363675
r: 02880092 p: 8.925 pid: 118948 b: MILWAUKEE q: 0 st: lt: 7 ean: 0045242192922 sr: MILWAUKEE 49560012 sr_no_br: 49560012 sr_no_br_cl: 49560012 sr_cl: MILWAUKEE49560012 sr_dash: sold: 44.625 p_range: none type: standard act: 1 avo: 1 av: Diameter (hole saw) 16 mm Connection type Inner thread n: MILWAUKEE 49560012 HOLE DOZER holesaw bi-metal 16 mm cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description Cutting edge technology for maximum productivity. Tooth design - A 3.5 teeth per inch tooth design with a positive 10° tooth angle provides the following benefits: - Faster and more aggressive cut. - Improved heat dispersion during cutting ensures that the teeth stay sharper for longer. - Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up. - Special shaped tooth angle has less tendency to snag on thinner materials. - Teeth are alternate/side set to minimise binding and friction. - Requires less feed pressure - This is achieved by the combination of aggressive tooth geometry and good chip clearance resulting in the requirement of less force during drilling. Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II steel contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. - Bi-Metal construction - High speed steel teeth are laser welded onto a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600°C to give maximum durability and life time. - Due to the high wear resistance of the Matrix II material, these holesaws are ideal for cutting difficult and hard materials such as stainless steel and acid resistant steels as well as softer materials like wood. Holesaw body - 1.27 mm thick steel holesaw body is rigid to retain its shape but also has built in elasticity. - Effective sawing depth is 41 mm. Back plate design - The back plates are constructed with thick steel thus the holes will not enlarge over time. - Thick backs add strength and rigidity minimising vibrations. - 4 drive pin holes for easier arbor location. - Perfectly manufactured round back plate, especially important for the larger diameter holesaws. Multiple slot design aids the removal and ejection of the core. Applications - High quality manufacturing techniques ensure high rotational precision, therefore these holesaws are suitable for use both in hand and pillar drills (manual feed only). This high quality holesaw range is the perfect solution for cutting all types of materials: - Steel up to 1000 N/mm² strength - Stainless steel and acid resistant steel - Non-ferrous metals - Cast iron - Aluminium - Wood - Medium density fibreboard (MDF) - Gypsum plasterboard - Sandwich materials - PVC. ds: dsc: kts: HOLE DOZER holesaw bi-metal 16 mm kpn: 49560012 kpn_dash: kpn_clear: 49560012 bkpn: MILWAUKEE 49560012 bkpn_clear: MILWAUKEE 49560012 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee cutting tools / Milwaukee sawing and cutting / Milwaukee hole saw sr_no_br_cl_ns: 49560012 sr_ns: MILWAUKEE49560012
r: 02882891 p: 14.834 pid: 120490 b: MILWAUKEE q: 0 st: lt: 7 ean: 4002395330652 sr: MILWAUKEE 4932363564 sr_no_br: 4932363564 sr_no_br_cl: 4932363564 sr_cl: MILWAUKEE4932363564 sr_dash: sold: 44.502 p_range: none type: standard act: 1 avo: 1 av: Diameter 13 mm Drill bit type Metal drill bit Overall length 151 mm Shank size 13 mm Shank type Cylindrical Material (drill bit) HSS-R Standard DIN 338 Number of cutting edges 2 ea Quantity per blister 5 Cutting length 101 mm n: MILWAUKEE 4932363564 HSS-R metal drill bit DIN 338 - 13x151mm (5 pcs) cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description High speed steel rollforged metal drill bits produced according to DIN 338. Oxide coating enables quick swarf removal. Normal point shaped cutting tip with 118° angle. Type N flute normal angle. Suitable for drilling in steel, cast iron, alloyed and non-alloyed material up to 800 N/mm². Colour: black. ds: dsc: kts: HSS-R metal drill bit DIN 338 - 13x151mm (5 pcs) kpn: 4932363564 kpn_dash: kpn_clear: 4932363564 bkpn: MILWAUKEE 4932363564 bkpn_clear: MILWAUKEE 4932363564 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee cutting tools / Milwaukee drilling and punching / Milwaukee drill bit sr_no_br_cl_ns: 4932363564 sr_ns: MILWAUKEE4932363564
r: 02882778 p: 44.297 pid: 118691 b: MILWAUKEE q: 0 st: lt: 6 ean: 4002395347803 sr: MILWAUKEE 4932373355 sr_no_br: 4932373355 sr_no_br_cl: 4932373355 sr_cl: MILWAUKEE4932373355 sr_dash: sold: 44.297 p_range: none type: standard act: 1 avo: 1 av: Diameter 10,5 mm Drill bit type Metal drill bit Overall length 133 mm Shank size 10,5 mm Shank type Cylindrical Material (drill bit) HSS-E Co 5% Standard DIN 338 Number of cutting edges 2 ea Quantity per blister 5 Cutting length 87 mm n: MILWAUKEE 4932373355 HSS-G Cobalt metal drill bit 10.5x133mm (5 pcs) cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bits ground from solid, extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338. Suitable for drilling high alloy content steels and metals with tensile strengths over 1000 N/mm² like stainless steel. QUAD EDGE Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster. Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability. 3-flat shank from Ø 5 mm for better grip and prevents chuck slippage. Colour: bronze. ds: dsc: kts: HSS-G Cobalt metal drill bit 10.5x133mm (5 pcs) kpn: 4932373355 kpn_dash: kpn_clear: 4932373355 bkpn: MILWAUKEE 4932373355 bkpn_clear: MILWAUKEE 4932373355 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee cutting tools / Milwaukee drilling and punching / Milwaukee drill bit sr_no_br_cl_ns: 4932373355 sr_ns: MILWAUKEE4932373355
r: 08069297 p: 22.148 pid: 89042 b: MILWAUKEE q: 0 st: lt: 8 ean: 4058546368333 sr: MILWAUKEE 4932479039 sr_no_br: 4932479039 sr_no_br_cl: 4932479039 sr_cl: MILWAUKEE4932479039 sr_dash: sold: 44.296 p_range: none type: standard act: 1 avo: 1 av: Diameter (hole saw) 25 mm n: MILWAUKEE 4932479039 TCT stainless steel hole saw 25 mm cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description Carbide tooth technology provides for best performance, speed and 10x more lifetime than standard bi-metal holesaws. Teeth can also be resharpened. Extra deep 25 mm cutting depth for drilling in sheet material and pipes. One solid piece holesaw design reduces wobble and vibration for accurate drilling. Safety stop collar prevents over drilling for best safety. Ejector spring helps eject the slug, prevents jamming and saves time. With 3-flat secure grip shank reception to prevent the holesaw slipping in the chuck and to ensure maximum torque transmission. Diameters 16-76 mm with 10 mm and >80 mm with 13 mm 3-flat shank reception. Replaceable pilot drill and spring. Use a cooling lubricant to extend the life of the holesaw. For metals use cutting oil, aluminium turpentine, plastics water and for cast iron drill dry. Suitable for drilling steel ( ds: dsc: kts: TCT stainless steel hole saw 25 mm kpn: 4932479039 kpn_dash: kpn_clear: 4932479039 bkpn: MILWAUKEE 4932479039 bkpn_clear: MILWAUKEE 4932479039 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee cutting tools / Milwaukee sawing and cutting / Milwaukee hole saw sr_no_br_cl_ns: 4932479039 sr_ns: MILWAUKEE4932479039
r: 02880195 p: 44.132 pid: 118191 b: MILWAUKEE q: 0 st: lt: 7 ean: 0045242193622 sr: MILWAUKEE 49560253 sr_no_br: 49560253 sr_no_br_cl: 49560253 sr_cl: MILWAUKEE49560253 sr_dash: sold: 44.132 p_range: none type: standard act: 1 avo: 1 av: Diameter (hole saw) 152 mm Connection type Inner thread n: MILWAUKEE 49560253 HOLE DOZER hole saw bi-metal 152 mm cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description Cutting edge technology for maximum productivity. Tooth design - A 3.5 teeth per inch tooth design with a positive 10° tooth angle provides the following benefits: - Faster and more aggressive cut. - Improved heat dispersion during cutting ensures that the teeth stay sharper for longer. - Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up. - Special shaped tooth angle has less tendency to snag on thinner materials. - Teeth are alternate/side set to minimise binding and friction. - Requires less feed pressure - This is achieved by the combination of aggressive tooth geometry and good chip clearance resulting in the requirement of less force during drilling. Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II steel contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. - Bi-Metal construction - High speed steel teeth are laser welded onto a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600°C to give maximum durability and life time. - Due to the high wear resistance of the Matrix II material, these holesaws are ideal for cutting difficult and hard materials such as stainless steel and acid resistant steels as well as softer materials like wood. Holesaw body - 1.27 mm thick steel holesaw body is rigid to retain its shape but also has built in elasticity. - Effective sawing depth is 41 mm. Back plate design - The back plates are constructed with thick steel thus the holes will not enlarge over time. - Thick backs add strength and rigidity minimising vibrations. - 4 drive pin holes for easier arbor location. - Perfectly manufactured round back plate, especially important for the larger diameter holesaws. Multiple slot design aids the removal and ejection of the core. Applications - High quality manufacturing techniques ensure high rotational precision, therefore these holesaws are suitable for use both in hand and pillar drills (manual feed only). This high quality holesaw range is the perfect solution for cutting all types of materials: - Steel up to 1000 N/mm² strength - Stainless steel and acid resistant steel - Non-ferrous metals - Cast iron - Aluminium - Wood - Medium density fibreboard (MDF) - Gypsum plasterboard - Sandwich materials - PVC. ds: dsc: kts: HOLE DOZER hole saw bi-metal 152 mm kpn: 49560253 kpn_dash: kpn_clear: 49560253 bkpn: MILWAUKEE 49560253 bkpn_clear: MILWAUKEE 49560253 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee cutting tools / Milwaukee sawing and cutting / Milwaukee hole saw sr_no_br_cl_ns: 49560253 sr_ns: MILWAUKEE49560253
