milwaukee_4933451204
milwaukee_4933451204_2
milwaukee_4933451204_3
milwaukee_4933451204_4
milwaukee_4933451204_5
milwaukee_4933451204_6
milwaukee_4933451204_7
milwaukee_4933451204_8
milwaukee_4933451204_9
milwaukee_4933451204_10
milwaukee_4933451204_11
milwaukee_4933451204_12
milwaukee_4933451204_13
milwaukee_4933451204
milwaukee_4933451204_2
milwaukee_4933451204_3
milwaukee_4933451204_4
milwaukee_4933451204_5
milwaukee_4933451204_6
milwaukee_4933451204_7
milwaukee_4933451204_8
milwaukee_4933451204_9
milwaukee_4933451204_10
milwaukee_4933451204_11
milwaukee_4933451204_12
milwaukee_4933451204_13

MILWAUKEE M18 HKP-201CA FORCE LOGIC hydraulic cordless punch press in transport case with set of punches and dies (1x 2.0Ah battery + charger) - 4933451204

Supplier number: MILWAUKEE 4933451204 | EAN 4002395138920
Recommended Retail Price €1,456.62
1,118.14 tax incl.
€924.09 excl. VAT (incl. all environmental contributions)
On stock - immediately available

Clean sheet metal punching with Milwaukee

Practical benefits
  • High hydraulic punching force: Delivering 60 kN of force, it punches holes up to 100 mm in 3 mm mild steel.
  • Fast alignment without fatigue: You set up punches and dies precisely on the panel before attaching the tool with the quick connector.
  • Balanced single-handed operation: The ergonomic, compact housing allows you to retain full control inside crowded electrical enclosures.

In a nutshell

The right choise for

Cut clean pass-through openings in control cabinets using the Milwaukee M18 HKP-201CA Force Logic cordless hydraulic knockout punch. Its 60 kN hydraulic drive produces burr-free holes up to 100 mm in 3 mm sheet steel and 2.5 mm stainless steel, without sparks or metal shavings.

The quick connector speeds up every setup. You align the draw stud, punch, and die directly on the workpiece without holding the tool weight. Snap the compact body into place for steady single-handed operation in tight enclosures.

The carry case includes one 2.0Ah M18 B2 battery, an M12-18 C charger, 11.1 mm and 19 mm draw studs, an adaptor, and dies and punches for M16, M20, M25, M32, and M40.

Recommended Combinations
With Milwaukee M18 HB5 18V 5.0 Ah Battery
With Milwaukee M18 HB5 18V 5.0 Ah Battery and Charger


€1,118.14
In stock - tax incl.

Product information

Key features according to our expert

  • Battery voltage: 18 V
  • Capacity (battery): 2 Ah
  • Max. punching diameter: 100 mm
  • Max. material thickness: 3 mm
  • Supplied in: Case
  • Type of system case: Not applicable
  • UN number: UN3481
  • Number of batteries supplied: 1
  • Product Range: Milwaukee M18

Scope of delivery

  • 1 x M18 B2 Battery-pack
  • M12-18 C Charger
  • Supplied in: Kitbox
  • 11.1mm (7/16") draw stud
  • 19mm (3/4") draw stud
  • Quick connector
  • Ball pull
  • Adaptor
  • Punches and dies: M16, M20, M25, M32, M40

Product description

  • FORCE LOGIC hydraulic knockout punch is the most compact and lightweight tool on the market with 60 kN of force
  • The easiest way to punch - for fast, accurate, round, and burr free holes
  • Highest accuracy due to industry's finest exact alignment system for dies
  • Best balanced tool and easiest control due to one hand operation
  • Quick connector allows easy set-up of punch and die without carrying the weight of the tool
  • Tool punches up to Ø100 mm holes into 3.0 mm mild steel or 2.5 mm stainless steel
  • Compatible with most common punches and dies available on market
  • Easiest, less strenuous and nonexpendable way of making holes into sheet metal
  • On board fuel gauge and LED light
  • Brushless motor, REDLITHIUM battery pack and REDLINK electronic deliver power, run time and durability
  • Flexible battery system: works with all MILWAUKEE M18 batteries

All Features

Battery voltage
18 V
Capacity (battery)
2 Ah
Max. punching diameter
100 mm
Max. material thickness
3 mm
Supplied in
Case
Type of system case
Not applicable
Un number
UN3481
Number of batteries supplied
1
Sound power level, deviation (db(a))
3
Sound power level (lwa(db(a))
76.8
Vibration level, deviation (m/s²)
1.5
Sound pressure level, deviation (db(a))
3
Max. material thickness (mm)
2.5 in stainless steel and 3.0 in mild steel
Product range
Milwaukee M18
Max. punch diameter (mm)
100
Vibration level (m/s²)
1.28
Battery type
Li-ion
Voltage (v)
18
Punching force (kn)
60

Accessories

View more accessories (53)

Frequently asked questions about this product

Answered by specialists
Which punch and die sizes are included with this kit?
The kit includes punches and dies for M16, M20, M25, M32, and M40, alongside 11.1 mm (7/16") and 19 mm (3/4") draw studs.
What are the maximum punching capacity and sheet thickness?
Delivering 60 kN of hydraulic force, it punches up to 100 mm holes into 3 mm mild steel or 2.5 mm stainless steel.
Which battery and charger come in the kitbox?
The set comes with one 2.0Ah M18 B2 Li-ion battery pack and an M12-18 C multi-voltage charger.
Is this tool compatible with other Milwaukee M18 batteries?
Yes, the knockout punch works with every battery across the Milwaukee M18 platform.
How does the quick connector system work during setup?
The quick connector lets you align the draw stud, die, and punch directly on the panel without carrying the weight of the tool.
Questions about this product?

Our product specialists are happy to help with any questions about this range. Call, email or chat with us!

Chat with us

Viewed products

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.