- Diameter: 68 mm
- Max. cutting depth: 290 mm
Milwaukee core drill bit
Milwaukee core drill bits make large round openings in stone, concrete and masonry, for example for flush boxes, pipe and cable passages and ventilation. They are grouped with the drill bits, step drills and punches by Milwaukee.
Start with the chuck of your rotary hammer. SDS-Plus core bits fit the lighter combi hammers and suit boxes and smaller passages. They come as a TCT impact drilling crown and as a core drilling set. SDS-Max core bits go on heavier rotary hammers and reach diameters up to 100 mm.
Then choose the length, because it sets how thick a wall you can get through in one pass. There are short crowns of around 50 to 100 mm for flush boxes, medium ones of 182 or 290 mm, and long ones of 550 mm for passages through a solid wall. Diameters run from 35 mm to 100 mm.
All crowns have TCT carbide cutting teeth and work with hammer action. For holes in steel plate rather than masonry, a Milwaukee annular cutter on a magnetic drill is the right tool.
- Diameter: 100 mm
- Diameter: 80 mm
- Max. cutting depth: 290 mm
- Diameter: 68 mm
- Max. cutting depth: 50 mm
- Diameter: 65 mm
- Max. cutting depth: 50 mm
- Diameter: 60 mm
- Max. cutting depth: 100 mm
- Diameter: 65 mm
- Max. cutting depth: 100 mm
- Diameter: 82 mm
- Max. cutting depth: 50 mm
- Diameter: 50 mm
- Max. cutting depth: 100 mm
- Diameter: 90 mm
- Max. cutting depth: 100 mm
- Diameter: 100 mm
- Max. cutting depth: 100 mm
- Diameter: 50 mm
- Max. cutting depth: 58 mm
- Diameter: 80 mm
- Max. cutting depth: 100 mm
- Diameter: 68 mm
- Max. cutting depth: 50 mm
- Diameter: 90 mm
- Max. cutting depth: 50 mm
- Diameter: 35 mm
- Max. cutting depth: 58 mm
- Diameter: 65 mm
- Max. cutting depth: 50 mm
- Diameter: 150 mm
- Max. cutting depth: 550 mm
- Diameter: 125 mm
- Diameter: 80 mm
- Max. cutting depth: 550 mm