Dependable hand protection with Mapa
- Robust chemical and heat barrier: You shield your hands against chemical splashes and contact heat through the durable blend of neoprene and natural latex.
- Extended forearm coverage length: With an overall length of 380 mm, you keep both your hands and forearms safely covered during demanding industrial tasks.
- Comfortable and flexible interior: The integrated textile support ensures you maintain high dexterity and lasting wearing comfort throughout extensive work sessions.
With the Mapa Ultraneo 340 work gloves, you reliably protect your hands and forearms during industrial cleaning, maintenance, and chemical handling tasks. The durable blend of neoprene and natural latex provides an effective barrier against liquids, splashes, and contact heat. Featuring an extended 380 mm length, these size 9 gloves ensure comprehensive forearm coverage, while the soft textile liner delivers lasting comfort and excellent dexterity for demanding jobs.
Product description:
Comfort with light chemical protection
- Suitable for long-term use, greater comfort due to textile reinforcement
- Good dexterity, thanks to reduced glove thickness
Applications:
- Automotive/mechanical industry
- Battery, pump and compressor production
- Other sectors
- Wood treatment
- Industrial cleaning, maintenance
- Chemical industry
- Handling and transport of chemical products
Instructions for use:
- It is recommended to check that the gloves are suitable for the intended use, as conditions of use may differ from "ce" type tests.
- Persons sensitive to natural latex, thiuraam, thiazole, thiourea or dithiocarbamate are not recommended to use these gloves....
- Use the gloves with dry, clean hands.
- Do not leave the gloves in contact with any chemical agent for longer than the measured reference time. refer to the chemical resistance table below or contact technical customer service
- Mapa professionnel to ask for the reference time. use 2 pairs alternately if longer contact with a solvent is unavoidable.
- Raise the cuff to prevent hazardous chemical agent from dripping onto the arm.
- Check gloves for cuts and holes before using.
Storage conditions:
- Store the gloves in their original packaging, at a temperature above 5°c.
Washing conditions:
- Before removing gloves, clean them properly:
- When used with paint; pigments or ink: wipe with a damp cloth containing an appropriate solvent and then with a dry cloth
- When using with a solvent (thinner, etc.) : wipe with a dry cloth
- When used with an acid or alkaline substance: rinse the gloves thoroughly under running water and wipe with a dry cloth Note: using the gloves or cleaning or washing them in any other way may alter their performance.
Drying conditions:
- Ensure that the inside of the gloves is dry before putting them back on.
Legislation:
- This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council.
- This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach).