Contents of the pack
- DHP489 cordless hammer drill/driver, 73 Nm
- DTD158 cordless impact driver, 170 Nm
- DHR243 cordless SDS-Plus combi hammer
- DGA506 cordless angle grinder with slide switch, 125 mm
- 1 x 1914J1-4 LXT® DC18RC battery charger
- 3 x 197280-8 LXT® battery, 5.0 Ah BL1850B
- 1 x 821551-8 Makpac case III
- 1 x 821552-6 Makpac case IV
Product description DHP489
Powerful cordless screwdriver and hammer drill fitted with an LED light
High-performance 18V screwdriver and hammer drill. High torque: 36 / 70 Nm (soft/hard drive).
- The eXtreme Protection Technology (XPT) ensures good dust and water resistance.
- The reverse switch is conveniently positioned
- Electric brake for maximum productivity and greater user safety
- The battery protection system automatically cuts off the power when the battery level is low
- Built-in LED light with pre- and post-illumination functions illuminates the work area
- Mechanical 2-speed gearbox; high speed for fast drilling in light-duty applications; low speed for heavy-duty applications requiring high torque.
- Quick-release chuck allows for easy, one-handed installation and removal of bits
Powerful cordless screwdriver and hammer drill with brushless motor, torque 70/36 Nm. Drilling into masonry is possible using the hammer function. High torque, even in second gear, thanks to the slightly lower speed. For screwdriving, the tool features 21-stage torque control, with settings ranging from 1.0 to 5.0 Nm. The Makita XPT system effectively protects the tool against dust and water. The powerful dual LED lights up the work area efficiently. The work light also has a delay function, meaning the light remains on for a further 10 seconds after the control switch is released. The all-metal chuck with quick-release mechanism is designed to withstand heavy-duty use. A side handle is available as an accessory.
Product description DTD158
Compact, lightweight impact driver with high torque.
The DTD158 is designed for ease of use and reliable performance, combining high speed and powerful torque in a lightweight, compact and well-balanced housing.
- 1/4" hex bit holder
- Thanks to the variable speed control, the user can adjust the speed to suit the application.
- The LED light illuminates the work area
- The rubber coating on the handle ensures a firm grip
- The battery safety system automatically cuts off the power when the battery level is low
- Low power consumption thanks to a brushless motor
The DTD158 is designed for ease of use and reliable performance, combining high speed and powerful torque in a lightweight, well-balanced body. The BL motor guarantees a longer service life and consistent performance across a wide range of fastening applications. An optimised battery position brings the centre of gravity closer to the handle, reducing strain on the wrist and improving control during prolonged use. Bits can be changed in a single movement with minimal resistance and a lower risk of them coming loose. The variable speed control allows for precise adjustment, whilst features such as an electric brake, a conveniently positioned reverse switch and a single LED light with pre- and post-glow functions enhance productivity and safety. Furthermore, the water-resistant construction and built-in battery protection ensure reliable operation in demanding working environments.
Product description DHR243
Brushless three-speed combi hammer with quick-release chuck
An efficient combi hammer with a vibration-dampening handle and a quick-release drill chuck suitable for SDS-PLUS bits. Suitable for hammer drilling, standard drilling and chiselling. Speed range from 0 to 950 rpm. Impact energy of 2.0 J and maximum drilling capacity of 24 mm in concrete.
- 40-position chisel adjustment
- The battery protection circuit protects against overloading, over-discharging and overheating
- Maintenance-free brushless motor with a long service life
- Equipped with 3 modes: drilling, hammer drilling or hammering only
Product description DGA506
Large brushless tool with brake for grinding and deburring
A compact, brushless angle grinder with a 125 mm disc for demanding professional use. Constant speed electronics and a fast-acting disc brake for added safety.
- The 3-stage LED indicator displays the battery charge level, overheating and overload status
- The ADT (Automatic Torque Drive Technology) quickly adjusts speed and torque during use for optimum performance
- The anti-restart function prevents the motor from restarting unintentionally after the power supply is interrupted.
- Electric brake for maximum productivity and greater user safety
- Electronic overload protection safeguards both the user and the machine
- The battery protection circuit protects against overloading, over-discharge and overheating
- Maintenance-free brushless motor with a long service life
- Slim housing design for a secure grip.
- Soft-start function for smooth start-up
