Product description
- Removable furniture connector, installed in seconds
- Supplement to Clamex P-14 for mid-wall joints from 16 mm upwards
- Aesthetic appearance with the barely visible 6 mm drill hole
- High clamping force for perfectly sealed joints
- Ideal for middle wall joints in sideboards, shelves or cupboards
Clamex P-14/10 Medius is a removable furniture connector that anchors in interlocking P-System grooves within seconds. With a minimalist operating opening of 6 mm, it is connected and disconnected via a lever just like an eccentric connector. The Clamex P-14/10 Medius was developed to complement the Clamex P-14 and offers the same benefits. These include high aesthetics thanks to the almost hidden connections, the small access bore, mitre joints at different angles and the powerfully connected yet detachable connectors. The Clamex P-14/10 Medius is distinguished only by connection halves of different sizes. If two pull-out shelves connect to a middle wall at the same height, the connecting half with size P-10 can be pushed into the middle wall from both sides. The crescent-shaped recesses on the back of the connecting halves allow joining middle walls from 16 mm upwards. With the Clamex P-14, a centre wall of 28 mm is required in this case. This makes the Clamex P-14/10 Medius the ideal solution for the middle walls of a piece of furniture.Mitre joints from a material thickness of 18 mm onwards
Applications
- Concealed intermediate wall joints from 16 mm with two pull-out shelves
- Dismountable connecting fittings for panel materials in furniture construction
- Glueing aid for mitred joints or corners that are difficult to tighten
- In furniture construction for high-quality furniture with mitred joints or unusual angles, wine racks or bookcases.
- Powerful alternative to connection fittings standards
- Rapid construction of prototypes for the start of a new furniture series
- Mitre joints from a material thickness of 12 mm
- Mitre joints from a material thickness of 18 mm
Features
- Dismountable: Always detachable with the rotating lever
- Aesthetic: The small, barely visible opening (Ø = 6 mm), serves for opening and closing the connector
- Groove overlapping installation: minimum routing depth allows connections from 16 mm and up for intermediate panels
- Quick installation: Push-in instead of screwing or gluing, in the blink of an eye and without waiting times
- Stackable: Workpieces with pre-assembled fittings remain stackable for easy storage or transportation