What is the maximum cutting capacity of these cable shears?

They cut copper and aluminium cables up to a diameter of 20 mm or a cross-section of 70 mm².

How does the twin cutting edge mechanism work?

You pre-cut the outer sheath in the front blade area and complete the cut through the conductor in the rear profile.

Can the Knipex 95 12 200 SB cut steel wire?

No, these shears are designed solely for copper and aluminium, not for steel wire or hard-drawn copper.

Is this tool VDE insulated for live electrical work?

No, this model features multi-component comfort grips but is not VDE certified or rated for 1000V.

Can the joint be adjusted after extensive use?

Yes, it is built with an adjustable bolted joint and a self-locking screw for precise guidance.

KNIPEX 95 12 200 SB sb double-edged cable cutter with comfort handles browned 200 mm

Name: KNIPEX 95 12 200 SB sb double-edged cable cutter with comfort handles browned 200 mm
Brand: KNIPEX
SKU: 02887792
Price: 49.2 EUR
Availability: PreOrder

Supplier number: KNIPEX 95 12 200 SB | EAN 4003773052197

Recommended Retail Price €79.01

49.20 tax incl.

€40.66 excl. VAT (incl. all environmental contributions)

On order: delivered from 23/10/2026

blister

Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

Clean and effortless cable cutting

Practical benefits

Genuine Knipex twin edge: You cut copper and aluminium cables up to 20 mm smoothly using the stepped initial and final cut.
Ergonomic multi-component handles: The comfortable grips fit naturally in your hand, reducing strain during continuous cutting tasks.
High leverage one-hand operation: Optimized mechanical transmission allows you to slice through thick conductors with minimal physical effort.

In a nutshell

The right choise for

With the Knipex 95 12 200 sb cable shears, you cut copper and aluminium cables up to 20 mm in diameter or 70 mm² cleanly without crushing or deforming the ends. The innovative twin cutting edge divides the task into two easy steps: pre-cut the insulating sheath in the front profile, then slice through the conductor in the rear profile using just one hand. An optimized lever ratio and hardened precision blades significantly reduce hand force during electrical installations and panel building. The ergonomic multi-component grips prevent hand fatigue during continuous use, while the adjustable bolted joint with a self-locking screw ensures precise guidance and smooth cutting performance every time.

Product information FAQ

€49.20

tax incl.

Key features according to our expert

Length: 200 mm

Product description

KNIPEX 95 12 200 SB Cable Shears with twin cutting edge with multi-component grips burnished 200 mm (self-service card/blister)
adjustable bolted joint, self-retaining screw
By dividing the cutting actions into initial cut (insulating sheath in the front cutting area) and final cut (conductor in the back cutting area), cables up to Ø 20 mm can be cut in one-hand operation
Clean and smooth cut without crushing and deformation
For cutting copper and aluminium cables
Low handforce required due to favourable lever ratio and special blade geometry
Not suitable for steel wire and hard drawn copper conductors
Pinch guard prevents operators' fingers being pinched
Precision-ground, hardened blades

Documents

⤓ Product sheet PDF

All Features

Length: 200 mm
Dimensions: 200 x 46 x 20 mm
Awg: 2 / 0
Weight: 324 g
Cutting value cu cable, multiple stranded: Ø 20 mm
Rohs compliance: irrelevant
Scissors: burnished
Reach compliance: does not contain SVHC
Handle: with comfort handles

Brand KNIPEX
02887792
EAN 4003773052197
Supplier number KNIPEX 95 12 200 SB

Frequently asked questions about this product

Answered by specialists

What is the maximum cutting capacity of these cable shears?: They cut copper and aluminium cables up to a diameter of 20 mm or a cross-section of 70 mm².
How does the twin cutting edge mechanism work?: You pre-cut the outer sheath in the front blade area and complete the cut through the conductor in the rear profile.
Can the Knipex 95 12 200 SB cut steel wire?: No, these shears are designed solely for copper and aluminium, not for steel wire or hard-drawn copper.
Is this tool VDE insulated for live electrical work?: No, this model features multi-component comfort grips but is not VDE certified or rated for 1000V.
Can the joint be adjusted after extensive use?: Yes, it is built with an adjustable bolted joint and a self-locking screw for precise guidance.