r: 02688547 p: 18.512 pid: 44763 b: WERA q: 0 st: lt: 12 ean: 4013288167316 sr: WERA 05073271001 sr_no_br: 05073271001 sr_no_br_cl: 05073271001 sr_cl: WERA05073271001 sr_dash: sold: 185.12 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 11 mm Overall length 165 mm Type of drive profile Twelve-point Product Range Wera Joker n: WERA 6000 Joker socket and ring spanner, 11 x 165 mm - 05073271001 cn: RATCHETING COMBINATION SPANNER cn2: RATCHETING COMBINATION SPANNER cn_clear: RATCHETINGCOMBINATIONSPANNER d: Product description Premium metric ring ratchet spanner by Wera: Everything a wrench can do and so much more. Faster, better, more beautiful. A real Joker. The new generation of ring ratchet spanners. For hexagon screw heads and bolts. With holding function enabled by a metal plate in the mouth, which reduces the risk of losing screws and sockets. With its extra hard teeth, the exchangeable metal plate in the mouth secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° at the jaw end avoids time-consuming rotating of the tool whilst screwdriving. Ratchet mechanism at the ring side with exceptionally high fine toothing of 80 teeth for flexibility even in confined spaces. The specially engineered geometry allows high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding by size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench Features and benefits The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined working spaces. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6000 Joker Ratcheting combination wrenches, 11 x 165 mm kts: socket and ring spanner, 11 x 165 mm kpn: 6000 Joker kpn_dash: kpn_clear: 6000Joker bkpn: WERA 6000 Joker bkpn_clear: WERA 6000Joker c_path: Home / Tools / Hand tools / Keys / Keys / Ratcheting combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratcheting combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05073271001 sr_ns: WERA05073271001
r: 03057676 p: 9.71 pid: 33679 b: WERA q: 0 st: lt: 14 ean: 4013288207814 sr: WERA 05023332001 sr_no_br: 05023332001 sr_no_br_cl: 05023332001 sr_cl: WERA05023332001 sr_dash: sold: 184.49 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Width across flats 2,5 mm With ball head Yes With handle Yes Handle type T-handle VDE approved No With safety colour code 1000V No Non-sparking No Blade length 100 mm Short arm length 12 mm Overall length 100 mm Product Range Wera Hex-Plus n: WERA 454 T-handle hex screwdriver Hex-Plus, 2.5 x 100 mm - 05023332001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. T-handle screwdriver for the transmission of particularly high tightening and loosening torque Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working Take it easy tool finder: colour coding according to profile and size With additional short arm for the transmission of extremely high torques due to the leverage of the long arm Application Hexagon socket screws Blade Round Design With long and short arm, Hex-Plus, bevelled, matte chrome-plated Handle T-shape, 2 components, with hole for hanging. With Take it easy tool finder: Colour coding by profiles (blue = hexagon socket) and size stamping. Features and benefits The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. The additional short arm, which emerges laterally from the handle, allows the transmission of extremely high torques by using the long arm as a lever. By using the blade as an extension of your lower arm you can transfer particularly high torque. Due to the special surface treatment, the blades receive a high level of corrosion protection. The optimum fitting accuracy of the screw is also guaranteed. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 454 T-handle hexagon screwdriver Hex-Plus, 2.5 x 100 mm kts: T-handle hex screwdriver Hex-Plus, 2.5 x 100 mm kpn: 454 kpn_dash: kpn_clear: 454 bkpn: WERA 454 bkpn_clear: WERA 454 c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05023332001 sr_ns: WERA05023332001
r: 08085374 p: 20.495 pid: 71963 b: WERA q: 0 st: lt: 8 ean: 4013288219015 sr: WERA 05020259001 sr_no_br: 05020259001 sr_no_br_cl: 05020259001 sr_cl: WERA05020259001 sr_dash: sold: 184.455 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1 8 mm Length 141 mm Non-sparking No VDE approved No With safety colour code 1000V Surface treatment Chrome plated Width across flats 2 10 mm Product Range Wera Joker n: WERA 6002 Joker 8 X 10 double open-end spanner, 8 x 10 x 141 mm - 05020259001 cn: OPEN-ENDED SPANNER cn2: OPEN-ENDED SPANNER cn_clear: OPENENDEDSPANNER d: Product description High-quality, metric double spanner from Wera: Everything a wrench can do and so much more. Faster, better, more beautiful. A real Joker! The new generation of double open-ended spanners. For hexagon screw heads and bolts. With holding function by a metal plate in the open end, which reduces the risk of losing screws and sockets. With its extra hard teeth the exchangeable metal plate in the open end secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° avoids time-consuming rotating of the wrench whilst screwdriving. The special forge geometry allows a high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With tool finder Take it easy: colour coding by size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagon bolts and nuts Design Double open-end wrench Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker double open-ended wrench is ideally suited for locking down nuts and bolts. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6002 Joker Double Open end wrenches, 8 x 10 x 141 mm kts: double open-end spanner, 8 x 10 x 141 mm kpn: 6002 Joker 8 X 10 kpn_dash: kpn_clear: 6002Joker8X10 bkpn: WERA 6002 Joker 8 X 10 bkpn_clear: WERA 6002Joker8X10 c_path: Home / Tools / Hand tools / Keys / Keys / Open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020259001 sr_ns: WERA05020259001
r: 02609220 p: 15.371 pid: 68400 b: STANLEY q: 0 st: lt: 8 ean: 3253564879903 sr: STANLEY 4-87-990 sr_no_br: 4-87-990 sr_no_br_cl: 487990 sr_cl: STANLEY487990 sr_dash: STANLEY 4 sold: 184.452 p_range: none type: standard act: 1 avo: 1 av: Min. diameter 17 mm Max. diameter 24 mm n: STANLEY 4-87-990 self-tensioning hook spanner 17 - 24mm cn: HOOK SPANNER cn2: HOOK SPANNER cn_clear: HOOKSPANNER d: Product description Self-tensioning Hook Wrench 17 - 24mm Features Automatic adjustment means the spanner does not need to be repositioned relative to the bolt or nut after each tour One tool is suitable for a wide range of fasteners Generously sized handle in two materials for higher comfort and performance ds: dsc: kts: self-tensioning hook spanner 17 - 24mm kpn: 4-87-990 kpn_dash: 4 kpn_clear: 487990 bkpn: STANLEY 4-87-990 bkpn_clear: STANLEY 487990 c_path: Home / Tools / Hand tools / Keys / Keys / Hook spanner | Home / Our brands / Stanley / Stanley tools / Stanley hand tools / Stanley keys / Stanley keys / Stanley hook spanner sr_no_br_cl_ns: 487990 sr_ns: STANLEY4-87-990
r: 41292399 p: 45.95 pid: 97939 b: FACOM q: 2 st: 1 lt: 1 ean: 3148511106204 sr: FACOM 54A.36 sr_no_br: 54A.36 sr_no_br_cl: 54A36 sr_cl: FACOM54A36 sr_dash: sold: 183.8 p_range: none type: standard act: 1 avo: 1 av: Width across flats 36 mm Supplier warranty FACOM - Lifetime (E) Connection size (Handle) 21,5 mm n: FACOM 54A.36 bent ring spanner "heavy duty" 36 mm cn: INTERCHANGEABLE RING SPANNER cn2: INTERCHANGEABLE RING SPANNER cn_clear: INTERCHANGEABLERINGSPANNER d: Product description 54A - Curved ring spanners "heavy duty", metric sizes Characteristics Recessed ring spanners "heavy version": intended for large tightening torques due to the very heavy design of the ring and the very long handle (to be ordered separately). The recess under the handle provides more space for fingers or an obstacle. Ideal for standard nuts. Wring pipe to use: 54.M1B for sizes 24 and 30 mm; 54.M2B for sizes 32 to 41 mm; 54.M3B for sizes 46 to 55 mm; 54.M4B for sizes 60 to 70 mm. Metric sizes: from 24 to 70 mm. Finish: chrome-plated, satinised. ds: dsc: kts: bent ring spanner "heavy duty" 36 mm kpn: 54A.36 kpn_dash: kpn_clear: 54A36 bkpn: FACOM 54A.36 bkpn_clear: FACOM 54A36 c_path: Home / Tools / Hand tools / Keys / Keys / Interchangeable ring spanner | Home / Our brands / Facom / Facom tools / Facom hand tools / Facom keys / Facom keys / Facom interchangeable ring spanner sr_no_br_cl_ns: 54A36 sr_ns: FACOM54A.36
r: 41890122 p: 60.991 pid: 59151 b: GEDORE q: 0 st: lt: 5 ean: 4010886601969 sr: GEDORE 6019690 sr_no_br: 6019690 sr_no_br_cl: 6019690 sr_cl: GEDORE6019690 sr_dash: sold: 182.973 p_range: none type: standard act: 1 avo: 1 av: Ring spanner type Double ring spanner VDE approved No Drive profile size 1 38 mm Non-sparking No With safety colour code 1000V Surface treatment Matt chrome plated Length 440 mm Type of drive profile 2 Twelve-point Drive profile size 2 42 mm Type of drive profile 1 Twelve-point n: GEDORE 2 38X42 ring spanner UD profile 38x42 mm - 6019690 cn: RING SPANNER cn2: RING SPANNER cn_clear: RINGSPANNER d: Product description Construction in accordance with DIN 838 ISO 3318 ISO 1085 ISO 10104 Deep-grooved, with thin-walled rings Vanadium steel 31CrV3, chrome-plated Non-mirroring, matt surface Carefully forged and expertly machined Ring thin-walled, deeply swaged and angled at 5°, with UD profile - for gentle force transmission High bending rigidity - does not break or splinter under overload, minimising the risk of injury Overloading is indicated by deformation For extremely deep or countersunk bolts or nuts High industrial quality for continuous loading under severe conditions ds: dsc: kts: ring spanner UD profile 38x42 mm kpn: 2 38X42 kpn_dash: kpn_clear: 238X42 bkpn: GEDORE 2 38X42 bkpn_clear: GEDORE 238X42 c_path: Home / Tools / Hand tools / Keys / Keys / Ring spanner | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore keys / Gedore keys / Gedore ring spanner sr_no_br_cl_ns: 6019690 sr_ns: GEDORE6019690
r: 41896171 p: 22.809 pid: 62239 b: GEDORE q: 0 st: lt: 6 ean: 4010886889404 sr: GEDORE 2297310 sr_no_br: 2297310 sr_no_br_cl: 2297310 sr_cl: GEDORE2297310 sr_dash: sold: 182.472 p_range: none type: standard act: 1 avo: 1 av: Width across flats 14 mm Overall length 183 mm n: GEDORE 7 UR 14 switchable ratchet spanner UD 14 mm - 2297310 cn: RATCHETING COMBINATION SPANNER cn2: RATCHETING COMBINATION SPANNER cn_clear: RATCHETINGCOMBINATIONSPANNER d: Product description With equal key widths UD profile High power transmission Chrome vanadium steel 31CrV3 Reflective appearance through matt chrome-plated surface, insert ring and locking bar manganese-phosphated Annealed forged Jaws ground to exact nominal size for optimum contact surfaces With adapter No. 7 RA or No. 7 RB (to be ordered separately), the No. 7 UR becomes a (bit) ratchet Ring side bent by 13°, switchable With spanner with ring ratchet No. 7 R for loosening the ratchet or quickly tightening the ratchet. Fits comfortably in the hand due to profiled profile in the shaft Torsion-resistant geometry with double-T profile ds: dsc: kts: switchable ratchet spanner UD 14 mm kpn: 7 UR 14 kpn_dash: kpn_clear: 7UR14 bkpn: GEDORE 7 UR 14 bkpn_clear: GEDORE 7UR14 c_path: Home / Tools / Hand tools / Keys / Keys / Ratcheting combination spanner | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore keys / Gedore keys / Gedore ratcheting combination spanner sr_no_br_cl_ns: 2297310 sr_ns: GEDORE2297310
r: 41850365 p: 36.322 pid: 78278 b: BAHCO q: 0 st: lt: 7 ean: 7314151055479 sr: BAHCO 1949M-24-27 sr_no_br: 1949M-24-27 sr_no_br_cl: 1949M2427 sr_cl: BAHCO1949M2427 sr_dash: BAHCO 1949M sold: 181.61 p_range: none type: standard act: 1 avo: 1 av: Ring spanner type Open ring spanner VDE approved No Drive profile size 1 24 mm Surface treatment Chrome plated, satin finised With safety colour code 1000V Non-sparking No Length 255 mm Type of drive profile 2 Twelve-point Drive profile size 2 27 mm Type of drive profile 1 Twelve-point n: BAHCO 1949M-24-27 open ring spanner chrome-plated 255 mm 24 mm x 27 mm cn: RING SPANNER cn2: RING SPANNER cn_clear: RINGSPANNER d: Product description: Flare nut wrench double end offset in metric sizes Standards: DIN 3118 Material: High performance alloy steel 6 points: 8x9, 10x11, 10x12, 12x13, 12x14 12 points: 14x15 and 14x17 onwards Ring end angle 15º for knuckle clearance or better grip Applications for tube tightening in auto and plumbing environments Special deep head to protect and apply heavy torque on the screw Chrome plated Micro Matt finishing provides high quality surface ds: dsc: kts: open ring spanner chrome-plated 255 mm 24 mm x 27 mm kpn: 1949M-24-27 kpn_dash: 1949M kpn_clear: 1949M2427 bkpn: BAHCO 1949M-24-27 bkpn_clear: BAHCO 1949M2427 c_path: Home / Tools / Hand tools / Keys / Keys / Ring spanner | Home / Our brands / Bahco / Bahco tools / Bahco hand tools / Bahco keys / Bahco keys / Bahco ring spanner sr_no_br_cl_ns: 1949M2427 sr_ns: BAHCO1949M-24-27
