r: 02452924 p: 11.376 pid: 3815 b: SOUDAL q: 879 st: 1 lt: 1 ean: 5411183083769 sr: SOUDAL 117474 sr_no_br: 117474 sr_no_br_cl: 117474 sr_cl: SOUDAL117474 sr_dash: sold: 12729.744 p_range: none type: standard act: 1 avo: 1 av: Net volume 280 ml Principal hazard property GHS07 Harmful or irritant Relative density 1,59 Packaging Cartridge ADR class UN number ADR packing group Conseils de prudence (P) P101; P102; P280; P264; P302 + P352; P333 + P313; P305 + P351 + P338; P337 + P313; P501 H-statements H319; H317 Hazard class GHS07 Harmful or irritant Physical state Liquid n: SOUDAL Soudafix VE400-SF chemical anchor 280 ml - 117474 cn: INJECTION MORTAR cn2: INJECTION MORTAR cn_clear: INJECTIONMORTAR d: Product description: SOUDAFIX VE400-SF is a two-component anchoring resin for the pressure-free securing of threaded rods (ETA: M8-M30), studs, reinforcement bars (ETA: Ø8-Ø32), threaded collars, profiles etc in various solid and hollow materials, such as cracked and uncracked concrete, solid brick, hollow brick, porous concrete, natural stone, plasterboard walls, etc Characteristics: Easy to use and to apply Fast cure Wide application area, even in wet drill holes, under water and at temp. as low as -10°C Styrene free (low odour) Cartridge re-usable by simply exchanging static mixer Watertight and impermeable fixing High chemical resistance Fire Resistance class F120 (M8-M30) European Technical Approval Option 1 for application in cracked and uncracked concrete Emission in indoor air class A+ Applications: Securing of heavy loads in solid and hollow building materials. Pressure free anchoring even close to edges. Can be used as repair mortar. Directions for use: Drill hole at recommended depth Clean drillhole with brush and air pump thouroughly Screw static mixer onto cartridge Dispense the first 10 cm of the product to waste (on piece of Cardboard) until an even colour (dark grey) is achieved, and the Product is well mixed Solid stone: fill the drill hole from bottom up. Hollow brick: insert sleeve and fill it bottom up, so that the resin Is pressed through the tiny holes of the sleeve Insert anchoring rod with twisting left-right motion Inspect the drill hole for adequate filling Observe hardening time. Don't move the anchoring rod during curing Leave the excess of product to cure as well. Remove it mechanically with hammer and chisel once cured Install component, applying the right torque Remarks: There is a risk of staining on porous substrates such as natural stone. On such substrates a preliminary compatibility test is recommended. ds: dsc: kts: chemical anchor 280 ml kpn: Soudafix VE400-SF kpn_dash: Soudafix VE400 kpn_clear: SoudafixVE400SF bkpn: SOUDAL Soudafix VE400-SF bkpn_clear: SOUDAL SoudafixVE400SF c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Injection mortar | Home / Our brands / Soudal / Soudal fasteners and machine components / Soudal fasteners / Soudal anchoring / Soudal injection mortar | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Injection mortar sr_no_br_cl_ns: 117474 sr_ns: SOUDAL117474
