Effortless preparation with Hg adhesive remover
- Tackles stubborn glue residue: You effortlessly dissolve demanding adhesives from carpets, vinyl, tiles, and parquet across multiple surface types.
- Safe on diverse substrates: You treat wood, concrete, and metal without harsh methylene chloride or methanol solvents damaging the base.
- Fast-acting surface recovery: You scrape away softened residue after a brief dwell time to quickly prepare your subfloor for new installations.
With Hg floor glue remover, you quickly and effectively clear surfaces of stubborn adhesive residues. Whether you need to remove old carpet, linoleum, vinyl, parquet, or tile adhesive, this liquid formula dissolves tough layers so you can avoid intensive sanding. Simply apply the remover generously using a brush, let it work for 10 to 15 minutes, and scrape the softened residue away with a putty knife. Because the formulation is free from methylene chloride and methanol, you can safely use it on diverse substrates such as wood, concrete, and metal. Thoroughly rinse the surface with water after treatment to achieve a clean, level foundation ready for your new floor installation.
Product description
- Works super fast
- Much better than any other
- Suitable for almost all surfaces
HG floor adhesive remover is an extra strong and super-fast-acting adhesive remover, suitable for removing the most stubborn (residues) of adhesives, such as solvent-based, solvent-free, carpet, linoleum, synthetic resin dispersion, PVC, parquet, cork, tile, wall and floor covering adhesives, as well as tix and assembly adhesives. HG floor glue remover does not contain the environmentally harmful raw materials methylene chloride and methanol. HG floor glue remover can be used without problems on almost all surfaces (e.g. wood, metal and concrete).
Application
Floor glue remover
Instructions for use
- First test HG floor glue remover on an inconspicuous place on the surface
- First cut floor covering into strips and roll them up
- (Vinyl) floor covering that cannot be peeled off must first be perforated with a puncture roller or similar tool
- The floor glue remover must be able to penetrate the glue layer well in order to remove it
- Apply HG floor glue remover generously with any remaining glue using, for example, a brush
- After approx. 10-15 minutes, remove the adhesive using a putty knife
- If necessary, repeat the treatment and extend the exposure time
- Then rinse surface well with water and allow to dry before applying new wall or floor covering
- Consumption: 0.5-1.0 L/m2 (depending on adhesive layer and substrate)