Clean tile surfaces without grout damage
- Powerful cement film removal: With Hg cement grout film remover, you easily clear stubborn cement haze and mortar residues from newly tiled floors and walls.
- Protects and strengthens grout: The liquid formula dissolves cement from the tile surface without degrading the jointing material, actively helping to reinforce the grout.
- Safe on natural stone: You can apply this cleaner to porous ceramic tiles as well as non-calciferous natural stone surfaces like slate, granite, and quartzite.
After tiling and grouting, you want a spotless finish without dull haze. With the Hg cement grout film remover product 11, you easily clear stubborn cement haze and light mortar residues from newly tiled floors and walls. This 1 l liquid cleaner dissolves surface cement deposits without degrading your grout, actively helping to reinforce the joints. You can safely apply it to porous and non-porous ceramic tiles, flagstones, and non-calciferous natural stone surfaces such as slate, granite, and quartzite. Restore the original look and shine of your newly tiled surfaces with ease.
Product description
HG tile cement residue remover (product 11) removes cement residue from all types of porous and non-porous ceramic tiles and flagstones, as well as non-calciferous natural stone types such as Norwegian slate, granite and quartzite. This unique product dissolves cement from the tile surface without affecting the cement in the joints; the joints are even strengthened. In addition, it is also suitable for removing rust. For very stubborn cement and mortar residues, we recommend HG cement & mortar residue remover (product 12).
Instructions for use
- For glazed, smooth tiles and flagstones: dissolve half a litre in 5 litres of water
- For unglazed and coarsely glazed tiles and non-calciferous natural stone: dissolve 1 litre in 4 litres of water
- First wet the surface with clean water and then apply the solution generously using a floor cloth or mop
- Do not treat more than 10 to 15 m2 at a time
- Then scrub the surface thoroughly with a scrubber or brush
- Soak for 15-20 minutes, keeping the floor wet with the solution of this product during the soaking period
- Then thoroughly scrub the treated surface again and remove the solution with a mop, rinsing it regularly and wringing it out in water
- Then mop the floor thoroughly 2-3 more times with clean water
- If necessary, repeat the treatment locally
- Consumption: 20-50 m2 depending on dilution and intensity of the cement residue
- Natural stone line
